Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Sensors Journal

Improved Resolution of Temperature Sensor Using Fast and Slow Light in a Fiber Resonator

Fan Wang, Yundong Zhang, Yanchen Qu, Siyu Lin, Xiaopeng Han

Published Jan 18, 2023• 3 citations
Publisher

Abstract

A novel scheme for improving the resolution of temperature sensor using fast and slow light in a fiber resonator is proposed and demonstrated experimentally. In the measurement system, the shift of resonance wavelength produced by the temperature change can be converted into strong variations of delay time. By measuring the delay time, this sensor we proposed has high-temperature sensitivity. Different from the traditional method of tracing spectrum, the temperature detection is carried out using an oscilloscope, which results in the sensor with fast response and high resolution. Moreover, the sensitivity, resolution, and measurement range of the sensor can be easily tuned by changing the${Q}$-factor of the resonator. Using this approach, we demonstrate temperature measurements at fiber resonators with low-${Q}$and high-${Q}$, respectively, as well as a$3.76\times 10^{-{4}}\,\,^{\circ }\text{C}$resolution and a 2706 ns/°C sensitivity of temperature sensing are obtained. The scheme is simple in structure and easy to implement, which is particularly suitable for detecting very small temperature changes.

DOI
10.1109/jsen.2023.3236481

Related papers

Improved Closed-Loop Slow-Light Temperature Sensor With Millidegree Resolution for Laser Cooling

Enkeleda Balliu, Lauris Talbot, Chun‐Wei Chen +7 more

For applications such as laser cooling of doped fibers, where it is critical to measure accurately the temperature of a cooled fiber that is very close to room temperature, it is paramount to develop a reliable, very short (mm) fiber temperature sensor with millikelvin resolution and very little drift. We report a second generation of a unique slow-light fiber Bragg grating (FBG) temperature sensor that meets these stringent requirements. Experiments and modeling establish that its temperature response depends only on well-known material constants of the silica FBG and the response of the probe laser’s wavelength controller. The response is independent of the linewidth of the slow-light resonance, hence different FBGs and/or resonances have the exact same response. Examples of measured cooling in optically pumped Yb-doped fibers show that more reliable thermal contact with the cooled fiber is obtained by wrapping the FBG and the cooled fiber.

International Conference on Optical Fiber Sensors (OFS)•Jan 1, 2023•4 citations

Long-Distance High-Precision and High-Sensitivity Time Delay Variation Sensing Based on Fiber-Optic Weak Measurements

Wei-Qian Zhao, Zu-En Su, Ya‐Fei Yu +1 more

In fiber-optic sensing, time delays induced by polarization mode dispersion can distort signals in systems relying on phase or intensity variations for measurement, degrading performance, especially in long distance, high-precision applications. To address this challenge, we propose a weak measurement-based scheme using intensity contrast ratio for high-precision, high-sensitivity fiber-optic time delay estimation under large inherent time delays. We demonstrate that a narrower light source bandwidth enhances the effective sensing distance for high-sensitivity measurements. Our results show that, even with large inherent time delays, the measurement precision and sensitivity remain comparable to those of biased weak measurement, enabling detection of time delay variations at the attosecond level, corresponding to a 25.5 Pa water pressure change. The scheme is also robust against fiber misalignment errors, offering a novel solution for long-distance distributed fiber-optic sensing and broadening the applications of weak measurement techniques.

arXiv:2501.03589•Journal of Lightwave Technology•Apr 29, 2025•3 citations

Magnetic-field-assisted optical fiber quantum temperature sensor with enhanced sensitivity

Jiayao Chen, Yunhan Luo, Jiajia Luo +6 more

In recent years, utilizing nitrogen-vacancy color centers in diamond for temperature sensing has drawn great attention. However, increasing the sensitivity has encountered challenges due to the intrinsic temperature-dependent energy level shift, i.e., temperature responsivity, being limited to -74 kHz/K. In this Letter, we take advantage of the magnetic field to regulate the energy level to enhance temperature sensitivity. The sensor is formed by adhering a micron-sized diamond on the end face of an optical fiber, and a small magnet is mounted at a certain distance with the diamond exploiting a cured polydimethylsiloxane block as the bridge. The temperature change leads to the variation of the distance between the diamond and the magnet, thus affecting the magnetic strength felt by the diamond. This finally contributes an additional temperature-induced energy level shift, giving rise to an enhanced sensitivity. Experimental results demonstrated the proposed scheme and achieved a 4.2-fold improvement in the temperature responsivity and a 2.1-fold enhancement in sensitivity. Moreover, the diamond and the fiber-optic integrated structure improve the portability of the sensor.

Optics Letters•Feb 14, 2024•8 citations

Tunable slow and fast light in a silicon-on-insulator Fano resonator

Tianqi Xu, Shaonan Zheng, Yang Qiu +5 more

Tunable slow and fast light generation in a silicon-on-insulator (SOI) Fano resonator is proposed and experimentally demonstrated. The slow and fast light generation with symmetric and asymmetric coupling conditions of the Fano resonator is theoretically analyzed. Under a slightly imbalanced coupling condition, the two output ports of the Fano resonator could produce a fast light and a slow light, respectively. By utilizing the thermo-optic (TO) effect to change the phase difference of the two optical beams coupled into the resonator, the transition of fast and slow light can be realized at the fixed resonance wavelength. Experimental results show that a slow-to-fast transition (group delay from 0.852 to -1.057 ns) at one resonance wavelength, and a fast-to-slow transition (group delay from -0.22 to 0.867 ns) at another resonance wavelength are realized simultaneously by controlling the microheater to tune the phase difference.

Optics Letters•Dec 7, 2022•6 citations

MICROWAVE RESONATORS FOR WEAK LIGHT DETECTION AT TELECOM WAVELENGTH

Pin-Jia Zhou, Yiwen Wang, Qiang Wei +1 more

We report the experimental measurements of weak light signal at 1550 nm wavelength with a high-quality factor microwave coplanar waveguide (CPW) resonators.The quality factor of this niobium λ/4 CPW resonator is measured as Q = 7.4 × 10 5 at ultra-low temperature (20 mK).With this device, we developed a technique to implement the proper fiber-resonator coupling, and realized the desirable weak light detection at telecommunication wavelength with 35 pW resolution by probing the shift of resonance frequency (f 0 ).We found that the resonator shift increases with the increasing light power (from 11.7 pW to 9.77 nW), similar to the effects of increasing the system temperature (from 20 mK to 800 mK).The observed blue shifts of f 0 (with the increasing of either the temperature and the applied light powers) are thoroughly deviated from the usual Mattis-Bardeen theory prediction, and could be explained by the effects relating to the two-level system existed on surface of the CPW device.

Electromagnetic waves•Jan 1, 2014•0 citations

Governing the speed of a light signal in optical fibers : Brillouin slow and fast light

Sang Hoon Chin

Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.

•Jan 1, 2009•0 citations
A novel scheme for improving the resolution of temperature sensor using fast and slow light in a fiber resonator is proposed and demonstrated experimentally. In the measurement system, the shift of resonance wavelength produced by the temperature change can be converted into strong variations of delay time. By measuring the delay time, this sensor we proposed has high-temperature sensitivity. Different from the traditional method of tracing spectrum, the temperature detection is carried out using an oscilloscope, which results in the sensor with fast response and high resolution. Moreover, the sensitivity, resolution, and measurement range of the sensor can be easily tuned by changing theQ{Q}Q-factor of the resonator. Using this approach, we demonstrate temperature measurements at fiber resonators with low-Q{Q}Qand high-Q{Q}Q, respectively, as well as a3.76×10−4  ∘C3.76\times 10^{-{4}}\,\,^{\circ }\text{C}3.76×10−4∘Cresolution and a 2706 ns/°C sensitivity of temperature sensing are obtained. The scheme is simple in structure and easy to implement, which is particularly suitable for detecting very small temperature changes.
For applications such as laser cooling of doped fibers, where it is critical to measure accurately the temperature of a cooled fiber that is very close to room temperature, it is paramount to develop a reliable, very short (mm) fiber temperature sensor with millikelvin resolution and very little drift. We report a second generation of a unique slow-light fiber Bragg grating (FBG) temperature sensor that meets these stringent requirements. Experiments and modeling establish that its temperature response depends only on well-known material constants of the silica FBG and the response of the probe laser’s wavelength controller. The response is independent of the linewidth of the slow-light resonance, hence different FBGs and/or resonances have the exact same response. Examples of measured cooling in optically pumped Yb-doped fibers show that more reliable thermal contact with the cooled fiber is obtained by wrapping the FBG and the cooled fiber.
In fiber-optic sensing, time delays induced by polarization mode dispersion can distort signals in systems relying on phase or intensity variations for measurement, degrading performance, especially in long distance, high-precision applications. To address this challenge, we propose a weak measurement-based scheme using intensity contrast ratio for high-precision, high-sensitivity fiber-optic time delay estimation under large inherent time delays. We demonstrate that a narrower light source bandwidth enhances the effective sensing distance for high-sensitivity measurements. Our results show that, even with large inherent time delays, the measurement precision and sensitivity remain comparable to those of biased weak measurement, enabling detection of time delay variations at the attosecond level, corresponding to a 25.5 Pa water pressure change. The scheme is also robust against fiber misalignment errors, offering a novel solution for long-distance distributed fiber-optic sensing and broadening the applications of weak measurement techniques.
In recent years, utilizing nitrogen-vacancy color centers in diamond for temperature sensing has drawn great attention. However, increasing the sensitivity has encountered challenges due to the intrinsic temperature-dependent energy level shift, i.e., temperature responsivity, being limited to -74 kHz/K. In this Letter, we take advantage of the magnetic field to regulate the energy level to enhance temperature sensitivity. The sensor is formed by adhering a micron-sized diamond on the end face of an optical fiber, and a small magnet is mounted at a certain distance with the diamond exploiting a cured polydimethylsiloxane block as the bridge. The temperature change leads to the variation of the distance between the diamond and the magnet, thus affecting the magnetic strength felt by the diamond. This finally contributes an additional temperature-induced energy level shift, giving rise to an enhanced sensitivity. Experimental results demonstrated the proposed scheme and achieved a 4.2-fold improvement in the temperature responsivity and a 2.1-fold enhancement in sensitivity. Moreover, the diamond and the fiber-optic integrated structure improve the portability of the sensor.
Tunable slow and fast light generation in a silicon-on-insulator (SOI) Fano resonator is proposed and experimentally demonstrated. The slow and fast light generation with symmetric and asymmetric coupling conditions of the Fano resonator is theoretically analyzed. Under a slightly imbalanced coupling condition, the two output ports of the Fano resonator could produce a fast light and a slow light, respectively. By utilizing the thermo-optic (TO) effect to change the phase difference of the two optical beams coupled into the resonator, the transition of fast and slow light can be realized at the fixed resonance wavelength. Experimental results show that a slow-to-fast transition (group delay from 0.852 to -1.057 ns) at one resonance wavelength, and a fast-to-slow transition (group delay from -0.22 to 0.867 ns) at another resonance wavelength are realized simultaneously by controlling the microheater to tune the phase difference.
We report the experimental measurements of weak light signal at 1550 nm wavelength with a high-quality factor microwave coplanar waveguide (CPW) resonators.The quality factor of this niobium λ/4 CPW resonator is measured as Q = 7.4 × 10 5 at ultra-low temperature (20 mK).With this device, we developed a technique to implement the proper fiber-resonator coupling, and realized the desirable weak light detection at telecommunication wavelength with 35 pW resolution by probing the shift of resonance frequency (f 0 ).We found that the resonator shift increases with the increasing light power (from 11.7 pW to 9.77 nW), similar to the effects of increasing the system temperature (from 20 mK to 800 mK).The observed blue shifts of f 0 (with the increasing of either the temperature and the applied light powers) are thoroughly deviated from the usual Mattis-Bardeen theory prediction, and could be explained by the effects relating to the two-level system existed on surface of the CPW device.
Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.