Physical layer key generation (PLKG) is one of the promising security solutions for communications in the Internet of Things $(\mathrm{I}\mathrm{o}\mathrm{T})$. Among implementations for the PLKG, a low-cost, integrated, and portable design is still lacking. To this end, we build a cheap and moderately complex testbed with ESP32, which supports on-chip channel estimation. In the proposed testbed, four tasks are created to achieve channel probing and message exchanging for the PLKG. Considering independent clocks and packet mismatches in the real world, we implement a PLKG prototype that generates secret keys at a rate of 19.45 bit/s. Experimental results show that the generated keys can pass all commonly-used National Institute of Standards and Technology (NIST) randomness tests, and the transmitted information cannot be decrypted by the illegitimate user.
Physical layer key generation (PLKG) is one of the promising security solutions for communications in the Internet of Things (IoT). Among implementations for the PLKG, a low-cost, integrated, and portable design is still lacking. To this end, we build a cheap and moderately complex testbed with ESP32, which supports on-chip channel estimation. In the proposed testbed, four tasks are created to achieve channel probing and message exchanging for the PLKG. Considering independent clocks and packet mismatches in the real world, we implement a PLKG prototype that generates secret keys at a rate of 19.45 bit/s. Experimental results show that the generated keys can pass all commonly-used National Institute of Standards and Technology (NIST) randomness tests, and the transmitted information cannot be decrypted by the illegitimate user.
The increasing use of Internet of Things (IoT) also make data security a very importance. Traditional cryptographic methods are often unsuitable for IoT due to limited processing power and memory capacity, creating a need for lightweight yet effective security solutions. Physical Layer Key Generation (PLKG) offers a promising approach by utilizing the unique characteristics of wireless communication channels to generate secret keys without overloaded system demands. This paper show a performance analysis of Group Secret Key Generation in outdoor environments. The challenges are interfrence, physical obstacles, and dynamic changes in the communication channel was also the part of this analysis. The test results show that group secret key generation achieved optimal performance in Scenario 2, which given a correlation coefficient of 63 %, indicating strong channel similarity between nodes and a bit retention rate of 97.9 % after quantization and error correction. Scenarios 1, 3, and 4 also show a good performance, with correlation coefficients of41%,14%, and 35 %, and corresponding bit retention rates of93.1%,90.9%, and 95.2 %, on each tests. All scenarios successfully met the entropy thresholds required for cryptographic applications, which include that randomness and security of the generated keys was confirmed.
With the increasing demands for sharing confidential information among massive Internet of Things (IoT) devices in 5G and beyond wireless networks, many applications require the common secret key generation for a group of IoT devices. However, most of the existing works on physical layer secret key generation (PLKG) only focus on the pairwise key generation between two users, which is a low efficient and high cost to be extended to the scenarios of group key generation. In this work, we propose a new efficient multiple-input–multiple-output (MIMO) physical layer group secret key generation scheme to reduce the consumption of channel probing and improve the efficiency for group key generation. Different from current schemes, in the proposed scheme, the transmitter randomly generates the group secret key and directly broadcasts the downlink data symbols to the group users. At the receiver end, each group user can efficiently “observe” the common group key through the downlink broadcasting data symbols, while keeping perfect secrecy of the shared group key against eavesdroppers. The performance of reliability, security, and the group key generation rate is fully investigated, which shows the advantages of high efficiency, low consumption, and strong robustness of the proposed scheme. Extensive simulations are conducted to validate the effectiveness of the proposed scheme.
Modern networking technologies involve the interconnection of smart and intelligent physical objects to provide advanced services. These physical objects may be part of various network technologies like WLAN, wireless sensor network (WSN), Internet of Things (IoT), etc., and share data in wireless mode, which should be secured from threats. These physical devices possess many constraints like power, computational complexity and storage, and are required to have lightweight security algorithms. Traditionally, security is achieved by the higher layers of the communication model, which has high computational complexity and consumes more power. In this chapter, a secure-key-generation scheme from physical layer characteristics is introduced as a possible lightweight security alternative to traditional upper-layer security approaches. The proposed scheme is based on the wiretap-channel model and security is achieved by generating keys at both communicating ends independently, based on inherent common-channel characteristics like randomness. It is mainly based on the principle of spatial decorrelation and channel reciprocity for identical carrier frequency. There is no provision for sharing keys as in public-key cryptography, so physical-layer key generation is not vulnerable to threats like key leakage. The generated key at the transmitter encrypts plain text; the generated cipher is transmitted on the common channel and is decrypted at the receiver end using the key generated by the receiver. Key generation consists of fundamental blocks like channel probing and quantization followed by information reconciliation and privacy amplification. The physical-layer key generation is already a power-efficient security solution; this chapter aims to enhance this capacity further. This is done by introducing low-end signal conditioning in the channel-probing step using moving-window averaging. This solution not only improves system performance but also makes it suitable for limited- power applications. The performance of the key-generation system is characterised in terms of the bit-disagreement rate between the generated key sequences of communicating parties and the key randomness by means of the NIST statistical test suite.
With the burgeoning internet of things (IoT), securing communication becomes paramount. Traditional cryptography does not meet computational needs and brute-force attacks. This review explores the state-of-the-art physical layer secret key generation (PLKG) that takes advantage of the inherent reciprocity and randomness of wireless channels. We investigate cutting-edge techniques such as feature extraction networks, domain adversarial training, and deep learning-based approaches, evaluating their effects on the security and efficiency of key generation. In addition to these methods, the review addresses real-world challenges such as multi-user scenarios, reconciliation overhead, and inconsistent channel measurement. We believe that improved key generation rates and security can be achieved through the use of millimeter wave technology and full-duplex communication. To strengthen the robustness of key generation, the paper concludes by suggesting future directions, such as incorporating more random sources, such as physiological signals and sensor data. This comprehensive overview offers deep insights into the state-of-the-art and paves the way for reliable communication in ever more complicated IoT settings.
The diverse application scenarios envisioned for sixth generation (6G) are characterized by the deep integration of sensing and ubiquitous connectivity, which imposes unprecedentedly stringent security requirements. However, due to the open nature of wireless channels, mobile communications systems always face severe information security threats such as falsification, spoofing, interception, and repudiation. Cryptography-based symmetric and asymmetric encryption techniques remain mainstream solutions for information protection. Symmetric encryption is efficient and secure for legitimate users but suffers from key-distribution difficulties over open wireless channels, whereas asymmetric encryption resolves this problem but faces increasing risks from quantum computing due to its reliance on structured mathematical hardness assumptions. In response to these limitations, physical layer security (PLS) has gained a great deal of research attention as a powerful security component that leverages the features of varying wireless channels. Existing PLS schemes can be broadly classified into two categories. The first one takes advantage of the legitimate link’s opportunistic channel-quality superiority over or different spatial-domain directions from the attacking link, which still faces many practical implementation difficulties. The second category is termed physical-layer key generation (PLKG). It extracts the unique features of the legitimate link’s channel variation, which is often reciprocal, as the source of secret key generation and therefore can naturally implement secure key distribution tasks. This advantage no doubt injects new vigor to symmetric encryption as a stronger protection approach. Following this trend, we in this paper concentrate on the PLKG techniques. Specifically, we present a comprehensive overview on existing PLKG schemes, discussing diverse secret key generation and reconciliation methods. We further investigate the model-driven and deep-learning-based approaches tailored for the scenario with imperfect channel reciprocity between the sender and receiver. After comprehensively reviewing major existing schemes, we further discuss a recently proposed PLKG design based on codeword reconstruction, which makes use of the strong error-correcting capability of the forward-error-correction (FEC) codes to effectively implement secure and consistent secret key generation between the legitimate sender and receiver. Finally, we share our opinions on the unsolved challenges and potential research directions dedicated to PLKG toward meeting the security requirements of 6G.
Devices in the Internet of Things (IoT) are usually limited in computing resources and energy capacity, which means that encryption schemes with higher complexity are not suitable for them to ensure secure communication. As a promising solution to this problem, physical layer key generation suggests that shared secret keys can be generated from noisy wireless channel measurements to enhance the security of wireless communications. In this article, we propose a key generation scheme with extremely low implementation complexity, which allows physical layer key generation to be implemented on IoT nodes. First, we preprocess the channel measurements with simple moving average filtering before quantization to improve channel reciprocity. Next, a bidirectional difference quantization scheme is proposed to realize reliable quantization of channel measurements, which is ingenious in that the quantization process does not depend on quantization thresholds, and thus, the mismatched key bits caused by measurements close to quantization thresholds can be effectively avoided. Then, we propose an improved Cascade protocol to achieve lightweight and efficient information reconciliation. The simulation results show that our scheme can well balance the reliability and efficiency of key generation, and has excellent performance in terms of implementation complexity and key randomness.