Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Quantum bit error rate timing jitter dependency on multi-mode fibers

Alexandra Lee, Alfonso Tello Castillo, Craig Whitehill, Ross J. Donaldson

Published Jan 16, 2023• 22 citations
Publisher

Abstract

The full time-jitter response of a single-photon detector can make a significant contribution to the quantum bit error rate (QBER) of high repetition rate quantum key distribution (QKD) implementations. Although there have been studies into understanding the contribution for single-mode optical fiber coupled single-photon detectors, the contribution of larger, multimode core diameters to the QBER have not been explored in detail. With the growing importance of free-space QKD, which typically use multimode fibers to reduce coupling loss, it is vitally important to understand how the multimode fiber coupling will impact the total QBER. This work studies the impact of the time-jitter contribution to QBER when coupling a commercial off-the-shelf silicon single-photon avalanche diode with various multimode fibers while simulating operating at 1 GHz with empirical measurements taken at 1 MHz repetition rate. It was found that step-index multimode fibers can significantly increase the QBER, while graded-index fibers can provide an QBER contribution similar to a single-mode fiber. The results highlight that there is a significant benefit in using graded index multimode fibers for a free-space QKD receiver, particularly for high repetition rate applications.

DOI
10.1364/oe.477156

Related papers

The impact of spot‐size on single‐photon avalanche diode timing‐jitter and quantum key distribution

Alexandra Lee, Alfonso Tello Castillo, Craig Whitehill +1 more

Abstract In free‐space implementations of Quantum key distribution (QKD), the wide adoption of near‐Infrared wavelengths has led to the common use of silicon single‐photon avalanche diodes (Si‐SPAD) for receiver systems. While the impacts of some SPAD properties on QKD have been explored extensively, the relationship of spot‐size and spatial position on the full instrumental response and thus quantum bit error rate (QBER) has been studied little. Changes in spot size and spatial position can result from atmospheric turbulence and pointing and tracking errors. Here, An empirical analysis of that relationship is presented utilising a large active area, 500 μm, free‐space coupled Si‐SPAD designed for free‐space QKD. A baseline full‐width at half‐maximum timing jitter of 182 ps and a QBER contribution of 0.1 % for a 1 GHz clock frequency QKD system and 100 ps time‐gating window are reported. The impacts of spot‐size and spatial position can increase the QBER to over 0.3%. The link between the spot‐size and timing jitter will allow the understanding of tolerancing for the alignment of Si‐SPADs within free‐space QKD receiver systems—an important factor in designing properly engineered practical systems and the equipment needed to compensate for atmospheric turbulence and pointing and tracking.

IET Quantum Communication•Feb 26, 2024•7 citations

Improved Timing Resolution Single-Photon Detectors in Daytime Free-Space Quantum Key Distribution With 1.25 GHz Transmission Rate

Alessandro Restelli, Joshua C. Bienfang, Charles W. Clark +4 more

In free-space single-photon quantum key distribution (QKD), the error rate due to daytime background photons can be reduced with strong temporal filtering. In this case, the improvement in performance is determined by the receiver's ability to resolve signal-photon arrival times. We use fast clock recovery and commercially available single-photon detectors with timing resolution enhanced by additional electronic circuitry to implement temporal gating down to 50 ps in a free-space QKD system. The single-photon channel operates at 850 nm, and the improved timing resolution enables transmission rates of 1.25 GHz. We observe daytime quantum bit error rates of 0.04, which is less than one-third of the ungated error rate. We present the design and performance of the system and demonstrate its benefit to free-space QKD.

IEEE Journal of Selected Topics in Quantum Electronics•Mar 19, 2010•18 citations

Multimode fiber influence on time response of single-photon avalanche diodes used in QKD

Alexandra Lee, Alfonso Tello Castillo, Ross J. Donaldson +1 more

For quantum key distribution (QKD), single-photon avalanche diodes (SPAD) are limited by the full timing response. Here, we summarise the impact of multimode fiber SPAD timing response for an alternative coupling from single-mode fiber.

Quantum 2.0 Conference and Exhibition•Jan 1, 2023•0 citations

Effect of crosstalk on QBER in QKD in urban telecommunication fiber lines

V. L. Kurochkin, Yuriy V. Kurochkin, Alexander V. Miller +2 more

Quantum key distribution (QKD) as a technology is being actively implemented into existing urban telecommunication networks. QKD devices are commercially available products. While sending single photons through optical fiber, adjacent fibers, which are used to transfer classical information, might influence the amount of registrations of single photon detectors. This influence is registered, since it directly introduces a higher quantum bit error rate (QBER) into the final key [1-3]. Our report presents the results of the first tests of the QKD device, developed in the Russian Quantum Center. These tests were conducted in Moscow, and are the first of such a device in Russia in urban optical fiber telecommunication networks. The device in question is based on a two-pass auto-compensating optical scheme, which provides stable single photon transfer through urban optical fiber telecommunication networks [4,5]. The single photon detectors ID230 by ID Quantique were used. They operate in free-running mode, and with a quantum effectiveness of 10 % have a dark count ~10 Hz. The background signal level in the dedicated fiber was no less than 5.6∙10-14 W, which corresponds to 4.4∙104 detector clicks per second. The single mode fiber length in Moscow was 30.6 km, the total attenuation equal to 11.7 dB. The sifted quantum key bit rate reached values of 1.9 kbit/s with the QBER level equal to 5.1 %. Methods of lowering the influence of crosstalk on the QBER are considered.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Dec 30, 2016•3 citations

Free-space quantum key distribution at GHz repetition rates

Joshua C. Bienfang, Daniel J. Rogers, Alessandro Restelli +7 more

Quantum key distribution (QKD) can produce secure cryptographic key for use in symmetric cryptosystems. By adopting clock-recovery techniques from modern telecommunications practice we have demonstrated a free-space quantum key distribution system operating at a transmission rate of 625 MHz at 850 nm. The transmission rate of this system is ultimately limited by the timing resolution of the single-photon avalanche photodiodes (SPADs), and we present a solution to take advantage of SPADs with higher timing resolution that can enable repetition rates up to 2.5 GHz. We also show that with high-repetition-rate sub-clock gating these higher-resolution SPADs can reduce the system's exposure to solar background photons, thus reducing the quantum-bit error rate (QBER) and improving system performance.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 8, 2007•1 citation

Enhancements to quantum communication performance utilizing a prototype photonic lantern and multiplexed single-photon detection

Harikumar K. Chandrasekharan, Peter Barrow, David G. MacLachlan +2 more

The optical interfacing between a free-space channel and single-photon detectors (SPDs) can greatly impact the inherent performance of a free-space quantum key distribution receiver. Direct coupling to detectors creates engineering challenges, and a single-mode fiber requires adaptive optics. Using a multimode fiber (MMF) is common; however, larger core diameters limit the achievable bandwidth. We demonstrate a prototype multimode fiber-based photonic lantern that allows us to retain the benefits of the large multimode coupling while transitioning to multiple, less multimodal fibers, reducing bandwidth limitation.

Optics Letters•Aug 23, 2024•2 citations
The full time-jitter response of a single-photon detector can make a significant contribution to the quantum bit error rate (QBER) of high repetition rate quantum key distribution (QKD) implementations. Although there have been studies into understanding the contribution for single-mode optical fiber coupled single-photon detectors, the contribution of larger, multimode core diameters to the QBER have not been explored in detail. With the growing importance of free-space QKD, which typically use multimode fibers to reduce coupling loss, it is vitally important to understand how the multimode fiber coupling will impact the total QBER. This work studies the impact of the time-jitter contribution to QBER when coupling a commercial off-the-shelf silicon single-photon avalanche diode with various multimode fibers while simulating operating at 1 GHz with empirical measurements taken at 1 MHz repetition rate. It was found that step-index multimode fibers can significantly increase the QBER, while graded-index fibers can provide an QBER contribution similar to a single-mode fiber. The results highlight that there is a significant benefit in using graded index multimode fibers for a free-space QKD receiver, particularly for high repetition rate applications.
Abstract In free‐space implementations of Quantum key distribution (QKD), the wide adoption of near‐Infrared wavelengths has led to the common use of silicon single‐photon avalanche diodes (Si‐SPAD) for receiver systems. While the impacts of some SPAD properties on QKD have been explored extensively, the relationship of spot‐size and spatial position on the full instrumental response and thus quantum bit error rate (QBER) has been studied little. Changes in spot size and spatial position can result from atmospheric turbulence and pointing and tracking errors. Here, An empirical analysis of that relationship is presented utilising a large active area, 500 μm, free‐space coupled Si‐SPAD designed for free‐space QKD. A baseline full‐width at half‐maximum timing jitter of 182 ps and a QBER contribution of 0.1 % for a 1 GHz clock frequency QKD system and 100 ps time‐gating window are reported. The impacts of spot‐size and spatial position can increase the QBER to over 0.3%. The link between the spot‐size and timing jitter will allow the understanding of tolerancing for the alignment of Si‐SPADs within free‐space QKD receiver systems—an important factor in designing properly engineered practical systems and the equipment needed to compensate for atmospheric turbulence and pointing and tracking.
In free-space single-photon quantum key distribution (QKD), the error rate due to daytime background photons can be reduced with strong temporal filtering. In this case, the improvement in performance is determined by the receiver's ability to resolve signal-photon arrival times. We use fast clock recovery and commercially available single-photon detectors with timing resolution enhanced by additional electronic circuitry to implement temporal gating down to 50 ps in a free-space QKD system. The single-photon channel operates at 850 nm, and the improved timing resolution enables transmission rates of 1.25 GHz. We observe daytime quantum bit error rates of 0.04, which is less than one-third of the ungated error rate. We present the design and performance of the system and demonstrate its benefit to free-space QKD.
Quantum key distribution (QKD) as a technology is being actively implemented into existing urban telecommunication networks. QKD devices are commercially available products. While sending single photons through optical fiber, adjacent fibers, which are used to transfer classical information, might influence the amount of registrations of single photon detectors. This influence is registered, since it directly introduces a higher quantum bit error rate (QBER) into the final key [1-3]. Our report presents the results of the first tests of the QKD device, developed in the Russian Quantum Center. These tests were conducted in Moscow, and are the first of such a device in Russia in urban optical fiber telecommunication networks. The device in question is based on a two-pass auto-compensating optical scheme, which provides stable single photon transfer through urban optical fiber telecommunication networks [4,5]. The single photon detectors ID230 by ID Quantique were used. They operate in free-running mode, and with a quantum effectiveness of 10 % have a dark count ~10 Hz. The background signal level in the dedicated fiber was no less than 5.6∙10-14 W, which corresponds to 4.4∙104 detector clicks per second. The single mode fiber length in Moscow was 30.6 km, the total attenuation equal to 11.7 dB. The sifted quantum key bit rate reached values of 1.9 kbit/s with the QBER level equal to 5.1 %. Methods of lowering the influence of crosstalk on the QBER are considered.
Quantum key distribution (QKD) can produce secure cryptographic key for use in symmetric cryptosystems. By adopting clock-recovery techniques from modern telecommunications practice we have demonstrated a free-space quantum key distribution system operating at a transmission rate of 625 MHz at 850 nm. The transmission rate of this system is ultimately limited by the timing resolution of the single-photon avalanche photodiodes (SPADs), and we present a solution to take advantage of SPADs with higher timing resolution that can enable repetition rates up to 2.5 GHz. We also show that with high-repetition-rate sub-clock gating these higher-resolution SPADs can reduce the system's exposure to solar background photons, thus reducing the quantum-bit error rate (QBER) and improving system performance.
The optical interfacing between a free-space channel and single-photon detectors (SPDs) can greatly impact the inherent performance of a free-space quantum key distribution receiver. Direct coupling to detectors creates engineering challenges, and a single-mode fiber requires adaptive optics. Using a multimode fiber (MMF) is common; however, larger core diameters limit the achievable bandwidth. We demonstrate a prototype multimode fiber-based photonic lantern that allows us to retain the benefits of the large multimode coupling while transitioning to multiple, less multimodal fibers, reducing bandwidth limitation.