Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Antennas and Wireless Propagation Letters

A High-Efficiency Fiber-Coupled Rydberg-Atom Integrated Probe and Its Imaging Applications

Ruiqi Mao, Yi Lin, Kai Yang, Qiang An, Yunqi Fu

Published Oct 5, 2022• 56 citations
Publisher

Abstract

Atomic sensing and electric field measurements based on the use of the all-optical electromagnetic induction transparency (EIT) spectrum of Rydberg atoms have attracted great interest due to the advantages of self-calibration, Le Système International d'unités traceability, and a broadband spectrum. At the same time, this methodology also promotes the development of atomic sensor technology. We present a novel high-efficiency Rydberg-atom radio-frequency (RF) electric (E) field integrated probe (Rydberg Field Probe or RFP). The high-efficiency RFP consists of a 10 mm cubic 133Cs vapor cell, a dichroic mirror, three collimating lenses, and three fibers. This system can be used to independently control two counterpropagating lasers passing through a vapor cell, easing the design effort. In addition, the overall system efficiency can reach a value of 40.4%, reducing the EIT power broadening doe conventional RFPs. Based on the designed high-efficiency RFP, near-field electric field measurement and imaging of a C-band horn antenna at 4.48 GHz are performed by using the resonant RF field of the 133Cs atomic Rydberg state at room temperature with a spatial resolution of λ/6. These results promote the development of atomic sensing technology and show great application potential for the measurement of measuring high-resolution radio frequency electric fields and arrays of RFPs.

DOI
10.1109/lawp.2022.3212057

Related papers

Towards Rydberg Atom Synthetic Apertures: Wide-Area High-Resolution RF Amplitude and Phase Imaging With Rydberg Probes

David Alexander Anderson, Luís F. Gonçalves, Remy Legaie +1 more

We present on the recent development of an atomic antenna probe and front-end based on Rydberg atoms for applications in radio-frequency (RF) imaging and synthetic apertures. Fundamental atom-RF responses and RF amplitude and phase determination methods for Rydberg atom probes are described. We demonstrate electric field imaging in the near-field of a 2.5 GHz Yagi-Uda antenna device under test (DUT) using a portable Rydberg atom probe and integrated front-end, the Rydberg Field Probe (RFP). A wide-area RF electric field map is generated by positioning of the RFP at discrete spatial measurement locations in the near field of the DUT, from which a composite image of the two-dimensional antenna pattern is realized at a spatial resolution of $\lambda /2$ and field uncertainties within 5.5%. Finally, we demonstrate RF phase imaging of a 100 GHz field using a Rydberg EIT optical fluorescence imager and RF self-homodyning, towards RF phase-sensing and imaging at millimeter-wave frequencies.

IEEE International Conference on Acoustics, Speech, and Signal Processing Workshops (ICASSPW)•Jun 4, 2023•3 citations

Fiber-coupled vapor cell for a portable Rydberg atom-based radio frequency electric field sensor

Matthew T. Simons, Joshua A. Gordon, Christopher L. Holloway

We demonstrate a movable, Rydberg atom-based radio frequency (RF) electric (E) field probe. The technique is based on electromagnetically induced transparency and Autler-Townes splitting. Two fibers attached to a 10 mm cubic Cs133 vapor cell are used to couple counter-propagating probe and control lasers through the cell. This all-dielectric fiber-coupled sensor can be moved from the optics table to locations more suitable for RF (gigahertz to sub-terahertz) E-field measurements and calibrations.

Applied Optics•Jul 25, 2018•117 citations

High-Resolution Near-Field Imaging and Far-Field Antenna Measurements with Atomic Sensors

David Alexander Anderson, Éric Paradis, Georg Raithe +3 more

Measurements of radio-frequency (RF) electric fields using atomic sensors based on quantum-optical spectroscopy of Rydberg states in vapors has garnered significant interest in recent years for the establishment of atomic standards for RF electric fields and towards the development of novel RF sensing instrumentation. Here we describe recent work employing atomic sensors for sub-wavelength near-field imaging of a Ku- band horn antenna. We demonstrate near-field imaging capability at a spatial resolution of λ/10 and measurements over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg-atom resonance. A fiber-coupled atomic-sensor probe is also employed in far-field measurements of a WR-90 standard gain horn.

International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe)•Aug 1, 2018•2 citations

Broadband Rydberg atom based self-calibrating RF E-field probe

Christopher L. Holloway, Josh A. Gordon, Andrew Schwarzkopf +6 more

We present a significantly new approach for an electric (E) field probe design. The probe is based on the interaction of RF-fields with Rydberg atoms, where alkali atoms are excited optically to Rydberg states and the applied RF-field alters the resonant state of the atoms. For this probe, the Rydberg atoms are excited in a glass vapor cell. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field to an optical-frequency response. The probe utilizes the concept of Electromagnetically Induced Transparency (EIT). The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum for the probe laser. This splitting is easily measured and is directly proportional to the applied RF field amplitude. Therefore, by measuring this splitting we get a direct measurement of the RF E-field strength. The significant dipole response of Rydberg atoms over the GHz regime enables this technique to make traceable measurements over a large frequency band including 1-500 GHz. We will show that, with one probe, measurements can be made over a very large frequency range. This is a truly broadband probe/sensor. In this paper, we report on our results in the development of this probe.

URSI General Assembly and Scientific Symposium•Aug 1, 2014•0 citations

Atom-based RF field probe: From self-calibrated measurements to sub-wavelength imaging

Christopher L. Holloway, Josh A. Gordon, Matthew T. Simons +5 more

In this presentation, we discuss a fundamentally new approach for an electric (E) field probe design. This new approach is significantly different than currently used field probes in that it is based on the interaction of RF-fields with Rydberg atoms (alkali atoms placed in a glass vapor cell are excited optically to Rydberg states). The applied RF-field alters the resonant state of the atoms. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field to an optical-frequency response. The RF probe utilizes the concept of Electromagnetically Induced Transparency (EIT). The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum for a probe laser. This splitting is easily measured and is directly proportional to the applied RF field amplitude. The significant dipole response of Rydberg atoms enables this technique to make self-calibrating measurements over a large frequency band including 1-500 GHz. In this paper, we report on our results in the development of this probe. We also discuss two key applications: that is, self-calibrated measurements and sub-wavelength imaging and field mapping.

IEEE International Conference on Nanotechnology (IEEE-NANO)•Jul 1, 2015•2 citations

Atom-Based RF Electric Field Metrology: From Self-Calibrated Measurements to Subwavelength and Near-Field Imaging

Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon +4 more

We discuss a fundamentally new method for electric (E) field strength (V/m) metrology applicable to the near-field. This new approach is significantly different from currently used field measurement techniques in that it is based on the interaction of radio-frequency (RF) E-fields with Rydberg atoms (alkali atoms placed in a glass vapor cell that are excited optically to Rydberg states). The applied RF E-field alters the state of the atoms. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field strength to an optical-frequency response. In this new approach, we employ the phenomena of electromagnetically induced transparency (EIT) and Autler-Townes splitting. The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum of a probe laser into two peaks. This splitting is easily measured and is directly proportional to the applied RF E-field amplitude. The significant dipole response of Rydberg atoms enables this technique to make self-calibrating measurements over a large frequency band including 500 MHz to 500 GHz (and possibly up to 1 THz and down to 10s of megahertz). In this paper, we report on our results in the development of this metrology approach, including the first fiber-coupled vapor-cell for E-field measurements. We also discuss key applications, including self-calibrated measurements, millimeter-wave and sub-THz measurements, field mapping, and sub-wavelength and near-field imaging. We show results for mapping the fields inside vapor cells, for measuring the E-field distribution along the surface of a circuit board, and for measuring the near-field at the aperture in a cavity. We also discuss the uncertainties of this measurement technique.

IEEE Transactions on Electromagnetic Compatibility•Jan 10, 2017•162 citations
Atomic sensing and electric field measurements based on the use of the all-optical electromagnetic induction transparency (EIT) spectrum of Rydberg atoms have attracted great interest due to the advantages of self-calibration, Le Système International d'unités traceability, and a broadband spectrum. At the same time, this methodology also promotes the development of atomic sensor technology. We present a novel high-efficiency Rydberg-atom radio-frequency (RF) electric (E) field integrated probe (Rydberg Field Probe or RFP). The high-efficiency RFP consists of a 10 mm cubic 133Cs vapor cell, a dichroic mirror, three collimating lenses, and three fibers. This system can be used to independently control two counterpropagating lasers passing through a vapor cell, easing the design effort. In addition, the overall system efficiency can reach a value of 40.4%, reducing the EIT power broadening doe conventional RFPs. Based on the designed high-efficiency RFP, near-field electric field measurement and imaging of a C-band horn antenna at 4.48 GHz are performed by using the resonant RF field of the 133Cs atomic Rydberg state at room temperature with a spatial resolution of λ/6. These results promote the development of atomic sensing technology and show great application potential for the measurement of measuring high-resolution radio frequency electric fields and arrays of RFPs.
We present on the recent development of an atomic antenna probe and front-end based on Rydberg atoms for applications in radio-frequency (RF) imaging and synthetic apertures. Fundamental atom-RF responses and RF amplitude and phase determination methods for Rydberg atom probes are described. We demonstrate electric field imaging in the near-field of a 2.5 GHz Yagi-Uda antenna device under test (DUT) using a portable Rydberg atom probe and integrated front-end, the Rydberg Field Probe (RFP). A wide-area RF electric field map is generated by positioning of the RFP at discrete spatial measurement locations in the near field of the DUT, from which a composite image of the two-dimensional antenna pattern is realized at a spatial resolution of λ/2\lambda /2λ/2 and field uncertainties within 5.5%. Finally, we demonstrate RF phase imaging of a 100 GHz field using a Rydberg EIT optical fluorescence imager and RF self-homodyning, towards RF phase-sensing and imaging at millimeter-wave frequencies.
We demonstrate a movable, Rydberg atom-based radio frequency (RF) electric (E) field probe. The technique is based on electromagnetically induced transparency and Autler-Townes splitting. Two fibers attached to a 10 mm cubic Cs133 vapor cell are used to couple counter-propagating probe and control lasers through the cell. This all-dielectric fiber-coupled sensor can be moved from the optics table to locations more suitable for RF (gigahertz to sub-terahertz) E-field measurements and calibrations.
Measurements of radio-frequency (RF) electric fields using atomic sensors based on quantum-optical spectroscopy of Rydberg states in vapors has garnered significant interest in recent years for the establishment of atomic standards for RF electric fields and towards the development of novel RF sensing instrumentation. Here we describe recent work employing atomic sensors for sub-wavelength near-field imaging of a Ku- band horn antenna. We demonstrate near-field imaging capability at a spatial resolution of λ/10 and measurements over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg-atom resonance. A fiber-coupled atomic-sensor probe is also employed in far-field measurements of a WR-90 standard gain horn.
We present a significantly new approach for an electric (E) field probe design. The probe is based on the interaction of RF-fields with Rydberg atoms, where alkali atoms are excited optically to Rydberg states and the applied RF-field alters the resonant state of the atoms. For this probe, the Rydberg atoms are excited in a glass vapor cell. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field to an optical-frequency response. The probe utilizes the concept of Electromagnetically Induced Transparency (EIT). The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum for the probe laser. This splitting is easily measured and is directly proportional to the applied RF field amplitude. Therefore, by measuring this splitting we get a direct measurement of the RF E-field strength. The significant dipole response of Rydberg atoms over the GHz regime enables this technique to make traceable measurements over a large frequency band including 1-500 GHz. We will show that, with one probe, measurements can be made over a very large frequency range. This is a truly broadband probe/sensor. In this paper, we report on our results in the development of this probe.
In this presentation, we discuss a fundamentally new approach for an electric (E) field probe design. This new approach is significantly different than currently used field probes in that it is based on the interaction of RF-fields with Rydberg atoms (alkali atoms placed in a glass vapor cell are excited optically to Rydberg states). The applied RF-field alters the resonant state of the atoms. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field to an optical-frequency response. The RF probe utilizes the concept of Electromagnetically Induced Transparency (EIT). The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum for a probe laser. This splitting is easily measured and is directly proportional to the applied RF field amplitude. The significant dipole response of Rydberg atoms enables this technique to make self-calibrating measurements over a large frequency band including 1-500 GHz. In this paper, we report on our results in the development of this probe. We also discuss two key applications: that is, self-calibrated measurements and sub-wavelength imaging and field mapping.
We discuss a fundamentally new method for electric (E) field strength (V/m) metrology applicable to the near-field. This new approach is significantly different from currently used field measurement techniques in that it is based on the interaction of radio-frequency (RF) E-fields with Rydberg atoms (alkali atoms placed in a glass vapor cell that are excited optically to Rydberg states). The applied RF E-field alters the state of the atoms. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field strength to an optical-frequency response. In this new approach, we employ the phenomena of electromagnetically induced transparency (EIT) and Autler-Townes splitting. The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum of a probe laser into two peaks. This splitting is easily measured and is directly proportional to the applied RF E-field amplitude. The significant dipole response of Rydberg atoms enables this technique to make self-calibrating measurements over a large frequency band including 500 MHz to 500 GHz (and possibly up to 1 THz and down to 10s of megahertz). In this paper, we report on our results in the development of this metrology approach, including the first fiber-coupled vapor-cell for E-field measurements. We also discuss key applications, including self-calibrated measurements, millimeter-wave and sub-THz measurements, field mapping, and sub-wavelength and near-field imaging. We show results for mapping the fields inside vapor cells, for measuring the E-field distribution along the surface of a circuit board, and for measuring the near-field at the aperture in a cavity. We also discuss the uncertainties of this measurement technique.