Quantum computing is at the cusp of showing relevance for real-world problems. However, currently available devices are small in scale, and hardware demonstrations have shown limited applicability to scientific and commercial problems of interest. In this work, we investigate a set of application-specific noisy intermediate-scale quantum (NISQ) algorithms varying in size from 4-80 qubits, and use these benchmarks to evaluate trade-offs in the design of trapped ion quantum computing architectures. We have developed a tool-chain consisting of architecture specific compilation and simulation tools and used these tools to target five different candidate trapped ion quantum computing architectures. Using our tool-chain, we can estimate metrics such as application run-times and overhead. Additionally, we use our tools to determine the critical operations of an architecture and to study the sensitivity to architectural constraints in particular implementations. Our tools are designed to be flexible, allowing us to study a broad range of benchmarks, hardware architectures, physical constraints, and operation timing.
Quantum computing is at the cusp of showing relevance for real-world problems. However, currently available devices are small in scale, and hardware demonstrations have shown limited applicability to scientific and commercial problems of interest. In this work, we investigate a set of application-specific noisy intermediate-scale quantum (NISQ) algorithms varying in size from 4-80 qubits, and use these benchmarks to evaluate trade-offs in the design of trapped ion quantum computing architectures. We have developed a tool-chain consisting of architecture specific compilation and simulation tools and used these tools to target five different candidate trapped ion quantum computing architectures. Using our tool-chain, we can estimate metrics such as application run-times and overhead. Additionally, we use our tools to determine the critical operations of an architecture and to study the sensitivity to architectural constraints in particular implementations. Our tools are designed to be flexible, allowing us to study a broad range of benchmarks, hardware architectures, physical constraints, and operation timing.
Trapped ions (TI) are a leading candidate for building Noisy Intermediate-Scale Quantum (NISQ) hardware. TI qubits have fundamental advantages over other technologies such as superconducting qubits, including high qubit quality, coherence and connectivity. However, current TI systems are small in size, with 5-20 qubits and typically use a single trap architecture which has fundamental scalability limitations. To progress towards the next major milestone of 50-100 qubit TI devices, a modular architecture termed the Quantum Charge Coupled Device (QCCD) has been proposed. In a QCCD-based TI device, small traps are connected through ion shuttling. While the basic hardware components for such devices have been demonstrated, building a 50-100 qubit system is challenging because of a wide range of design possibilities for trap sizing, communication topology and gate implementations and the need to match diverse application resource requirements.Towards realizing QCCD-based TI systems with 50-100 qubits, we perform an extensive application-driven architectural study evaluating the key design choices of trap sizing, communication topology and operation implementation methods. To enable our study, we built a design toolflow which takes a QCCD architecture's parameters as input, along with a set of applications and realistic hardware performance models. Our toolflow maps the applications onto the target device and simulates their execution to compute metrics such as application run time, reliability and device noise rates. Using six applications and several hardware design points, we show that trap sizing and communication topology choices can impact application reliability by up to three orders of magnitude. Microarchitectural gate implementation choices influence reliability by another order of magnitude. From these studies, we provide concrete recommendations to tune these choices to achieve highly reliable and performant application executions. With industry and academic efforts underway to build TI devices with 50-100 qubits, our insights have the potential to influence QC hardware in the near-future and accelerate the progress towards practical QC systems.
In recent years, Quantum Computing (QC) has progressed to the point where small working prototypes are available for use. Termed Noisy Intermediate-Scale Quantum (NISQ) computers, these prototypes are too small for large benchmarks or even for Quantum Error Correction (QEC), but they do have sufficient resources to run small benchmarks, particularly if compiled with optimizations to make use of scarce qubits and limited operation counts and coherence times. QC has not yet, however, settled on a particular preferred device implementation technology, and indeed different NISQ prototypes implement qubits with very different physical approaches and therefore widely-varying device and machine characteristics.
The practical performance of Noisy Intermediate-Scale Quantum (NISQ) processors is strongly influenced by hardware architecture, connectivity, and noise characteristics. In this work, we present an experimental benchmarking study of multipartite entanglement across cloud-accessible trapped-ion and superconducting quantum processors. Using Bell-state CHSH violation and GHZ-state fidelity as quantitative metrics, we evaluate entanglement generation on IonQ (trapped-ion) and IQM and Rigetti (superconducting) platforms under consistent compilation and execution settings via Amazon Braket. Experimental results demonstrate that trapped-ion processors sustain high-fidelity multipartite entanglement for up to 10 qubits, while superconducting architectures exhibit rapid fidelity degradation as circuit depth and routing overhead increase. These findings highlight the critical role of qubit connectivity and two-qubit gate performance in near-term entanglement scalability and provide an empirical comparison of architectural trade-offs in current NISQ hardware.
Today, the bottleneck in moving from theoretical quantum algorithms to practical implementations lies in a hard problem: architecture and structure, given hardware limitations. This highlights separations in the landscape of qubit realization, which are discussed in terms of trade-offs among gate speed, coherence time, and scalability across the four leading architectures. Superconducting circuits dominate industrial applications like rapid gate operations, yet they remain sensitive to decoherence. Trapped-ion systems perform exceptionally well in qubit fidelity but face many obstacles when scaling up the qubit count. Emerging alternatives, such as photonic systems that do not require extreme cooling and topological qubits, have been observed and analyzed. These are designed to be error-free in principle but are still in early experimental stages. By combining the strengths and weaknesses of these designs, this paper outlines the hardware evolution required to transition from Noisy Intermediate-Scale Quantum (NISQ) devices to fully faulttolerant systems. The work incorporates rigorous quantitative comparative analyses, performance modeling, and simulationbased evaluations to enhance the study's originality and technical depth.
Trapped ions (TIs) are a leading candidate for building Noisy Intermediate-Scale Quantum (NISQ) hardware. TI qubits have fundamental advantages over other technologies, featuring high qubit quality, coherence time, and qubit connectivity. However, current TI systems are small in size and typically use a single trap architecture, which has fundamental scalability limitations. To progress toward the next major milestone of 50--100 qubit TI devices, a modular architecture termed the Quantum Charge Coupled Device (QCCD) has been proposed. In a QCCD-based TI device, small traps are connected through ion shuttling. While the basic hardware components for such devices have been demonstrated, building a 50--100 qubit system is challenging because of a wide range of design possibilities for trap sizing, communication topology, and gate implementations and the need to match diverse application resource requirements. Toward realizing QCCD-based TI systems with 50--100 qubits, we perform an extensive application-driven architectural study evaluating the key design choices of trap sizing, communication topology, and operation implementation methods. To enable our study, we built a design toolflow, which takes a QCCD architecture's parameters as input, along with a set of applications and realistic hardware performance models. Our toolflow maps the applications onto the target device and simulates their execution to compute metrics such as application run time, reliability, and device noise rates. Using six applications and several hardware design points, we show that trap sizing and communication topology choices can impact application reliability by up to three orders of magnitude. Microarchitectural gate implementation choices influence reliability by another order of magnitude. From these studies, we provide concrete recommendations to tune these choices to achieve highly reliable and performant application executions. With industry and academic efforts underway to build TI devices with 50-100 qubits, our insights have the potential to influence QC hardware in the near future and accelerate the progress toward practical QC systems.
The theoretical study of quantum computation has yielded efficient algorithms for some traditionally hard problems. Correspondingly, experimental work on the underlying physical implementation technology has progressed steadily. However, almost no work has yet been done which explores the architecture design space of large scale quantum computing systems. In this paper, we present a set of tools that enable the quantitative evaluation of architectures for quantum computers. The infrastructure we created comprises a complete compilation and simulation system for computers containing thousands of quantum bits. We begin by compiling complete algorithms into a quantum instruction set. This ISA enables the simple manipulation of quantum state. Another tool we developed automatically transforms quantum software into an equivalent, fault-tolerant version required to operate on real quantum devices. Next, our infrastructure transforms the ISA into a set of low-level micro architecture specific control operations. In the future, these operations can be used to directly control a quantum computer. For now, our simulation framework quickly uses them to determine the reliability of the application for the target micro architecture. Finally, we propose a simple, regular architecture for ion-trap based quantum computers. Using our software infrastructure, we evaluate the design trade offs of this micro architecture.