Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

physica status solidi (b)

Phase Calibration of the Parametric Gate in the Superconducting Circuits

Qiang Liu, Ying Guan, Y. Liu, Hui Wang, Yong Li, Zhuang Ma, Xinsheng Tan, Rengang Li

Published Dec 8, 2022• 2 citations
Publisher

Abstract

The quantum gate, as the foundation of quantum computation, depends on the architecture of the quantum chip, especially in superconducting systems. The parametric modulation to the flux bias is an important protocol to realize the multi‐qubit gate, which has some intrinsic advantages. Similar to other two‐qubit operations, parametric gates leave the extra phase in single‐qubit space, which is required to be corrected. In this article, the relation between the phases of the modulated pulse and the applied microwaves is experimentally characterized. By adjusting the envelope shape and phase of the applied pulses, the extra phase of the one qubit generated by the two‐qubit gate is suppressed via a simple and fast Ramsey‐like experiment. The tomography results demonstrate that this protocol is an effective calibrating method for future large‐scale quantum circuit manipulation.

DOI
10.1002/pssb.202200474

Related papers

Error analysis in suppression of unwanted qubit interactions for a parametric gate in a tunable superconducting circuit

Xiyue Han, Tianqi Cai, Xiang Li +7 more

We experimentally demonstrate a parametric iswap gate in a superconducting circuit based on a tunable coupler for achieving a continuous tunability to eliminate unwanted qubit interactions. We implement the two-qubit iswap gate by applying a fast-flux bias modulation pulse on the coupler to turn on parametric exchange interaction between computational qubits. The controllable interaction can provide an extra degree of freedom to verify the optimal condition for constructing the parametric gate. Aiming to fully investigate error sources of the two-qubit gates, we perform quantum process tomography measurements and numerical simulations as varying static $ZZ$ coupling strength. We quantitatively calculate the dynamic $ZZ$ coupling parasitizing in two-qubit gate operation, and extract the particular gate error from the decoherence, dynamic $ZZ$ coupling, and high-order oscillation terms. Our results reveal that the main gate error comes from the decoherence, while the increase in the dynamic $ZZ$ coupling and high-order oscillation error degrades the parametric gate performance. This approach, which has not yet been previously explored, provides a guiding principle to improve gate fidelity of a parametric iswap gate by suppression of the unwanted qubit interactions. This controllable interaction, together with the parametric modulation technique, is desirable for crosstalk-free multiqubit quantum circuits and quantum simulation applications.

arXiv:2003.08542•Physical Review A•Aug 25, 2020•67 citations

Parametric phase modulation in superconducting circuits

Zhuang Ma, X. F. Li, Hongyi Shi +4 more

Parametric modulation, valued for its versatility, is widely employed in superconducting circuits for quantum simulations and high-fidelity two-qubit gates. Conventionally, the qubit coupling strength is determined by the amplitude of the parametric flux pulse, which affects the qubit parameters dramatically. In this paper, we propose and implement a phase-modulation scheme to tune the interaction strength via adjustment of the relative phase between the parametric flux pulses applied to two coupled qubits. We characterize this modulation for sideband couplings, at both sweet and off-sweet spots, achieving a broad range of coupling strengths, as confirmed by both population dynamics and spectroscopy methods. This approach enables phase-controlled modulation of coupling strength, providing a promising candidate for parametrically driven quantum simulations and gate operations.

arXiv:2510.20192•Physical Review Applied•Nov 21, 2025•3 citations

High-precision pulse calibration of tunable couplers for high-fidelity two-qubit gates in superconducting quantum processors

Tian-Ming Li, Jiachi Zhang, Bing-Jie Chen +23 more

For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-$Z$ (cz) and $i$swap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.

arXiv:2410.15041•Physical Review Applied•Feb 21, 2025•22 citations

Calibrating magnetic flux control in superconducting circuits by compensating distortions on timescales from nanoseconds up to tens of microseconds

Christoph Hellings, Nathan Lacroix, Ants Remm +8 more

Fast tuning of the transition frequency of superconducting qubits using magnetic flux is essential, for example, for realizing high-fidelity two-qubit gates with low leakage or for reducing errors in dispersive qubit readout. To apply accurately shaped flux pulses, signal distortions induced by the flux control lines need to be carefully compensated for. This requires their characterization at the reference plane of the qubit. However, many existing approaches are limited in time resolution or in pulse duration. Here, we overcome these limitations and demonstrate accurate flux control with subpermille residual frequency errors on timescales ranging from nanoseconds to tens of microseconds. We achieve this by combining two complementary methods to characterize and compensate for pulse distortions. We have deployed this approach successfully in a quantum error correction experiment calibrating 24 flux-activated two-qubit gates. Reliable calibration methods, as the ones presented here, are essential in experiments scaling up superconducting quantum processors.

arXiv:2503.04610•Physical Review Research•Nov 7, 2025•21 citations

State Manipulation via the All‐Microwave Protocol in the Superconducting Qutrits

Qiang Liu, Xiaofeng Song, Tao Liu +4 more

The quantum gate is the foundation of quantum computation and simulation in superconducting circuits. In recent years, quantum systems with three energy levels have attracted much attention. Therefore, it is essential to study the protocol of the quantum‐state transfer in qutrits. Herein, the all‐microwave schemes are studied to realize the state transfer and quantum gates. First, the ∣fg>–∣ge> transition is designed in a superconducting circuit with a relatively large coupling. We measured the Stark shift in cases where the experimental parameters did not satisfy the dispersive condition. Then, by carefully calibrating the pulse parameters, the regular Rabi oscillation and the state transfer are realized between the second excited state of two qubits via stimulated Raman adiabatic passage.

physica status solidi (b)•Apr 27, 2023•0 citations

Experimental Realization of Two Qutrits Gate with Tunable Coupling in Superconducting Circuits

Kai Luo, Wenhui Huang, Ziyu Tao +12 more

Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but with only two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multidimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this Letter, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on:off ratio. It therefore offers both high efficiency and low crosstalk between qutrits, thus being friendly for scaling up. Our Letter constitutes an important step toward scalable qutrit-based quantum computation.

arXiv:2206.11199•Physical Review Letters•Jan 20, 2023•64 citations
The quantum gate, as the foundation of quantum computation, depends on the architecture of the quantum chip, especially in superconducting systems. The parametric modulation to the flux bias is an important protocol to realize the multi‐qubit gate, which has some intrinsic advantages. Similar to other two‐qubit operations, parametric gates leave the extra phase in single‐qubit space, which is required to be corrected. In this article, the relation between the phases of the modulated pulse and the applied microwaves is experimentally characterized. By adjusting the envelope shape and phase of the applied pulses, the extra phase of the one qubit generated by the two‐qubit gate is suppressed via a simple and fast Ramsey‐like experiment. The tomography results demonstrate that this protocol is an effective calibrating method for future large‐scale quantum circuit manipulation.
We experimentally demonstrate a parametric iswap gate in a superconducting circuit based on a tunable coupler for achieving a continuous tunability to eliminate unwanted qubit interactions. We implement the two-qubit iswap gate by applying a fast-flux bias modulation pulse on the coupler to turn on parametric exchange interaction between computational qubits. The controllable interaction can provide an extra degree of freedom to verify the optimal condition for constructing the parametric gate. Aiming to fully investigate error sources of the two-qubit gates, we perform quantum process tomography measurements and numerical simulations as varying static ZZZZZZ coupling strength. We quantitatively calculate the dynamic ZZZZZZ coupling parasitizing in two-qubit gate operation, and extract the particular gate error from the decoherence, dynamic ZZZZZZ coupling, and high-order oscillation terms. Our results reveal that the main gate error comes from the decoherence, while the increase in the dynamic ZZZZZZ coupling and high-order oscillation error degrades the parametric gate performance. This approach, which has not yet been previously explored, provides a guiding principle to improve gate fidelity of a parametric iswap gate by suppression of the unwanted qubit interactions. This controllable interaction, together with the parametric modulation technique, is desirable for crosstalk-free multiqubit quantum circuits and quantum simulation applications.
Parametric modulation, valued for its versatility, is widely employed in superconducting circuits for quantum simulations and high-fidelity two-qubit gates. Conventionally, the qubit coupling strength is determined by the amplitude of the parametric flux pulse, which affects the qubit parameters dramatically. In this paper, we propose and implement a phase-modulation scheme to tune the interaction strength via adjustment of the relative phase between the parametric flux pulses applied to two coupled qubits. We characterize this modulation for sideband couplings, at both sweet and off-sweet spots, achieving a broad range of coupling strengths, as confirmed by both population dynamics and spectroscopy methods. This approach enables phase-controlled modulation of coupling strength, providing a promising candidate for parametrically driven quantum simulations and gate operations.
For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-ZZZ (cz) and iiiswap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.
Fast tuning of the transition frequency of superconducting qubits using magnetic flux is essential, for example, for realizing high-fidelity two-qubit gates with low leakage or for reducing errors in dispersive qubit readout. To apply accurately shaped flux pulses, signal distortions induced by the flux control lines need to be carefully compensated for. This requires their characterization at the reference plane of the qubit. However, many existing approaches are limited in time resolution or in pulse duration. Here, we overcome these limitations and demonstrate accurate flux control with subpermille residual frequency errors on timescales ranging from nanoseconds to tens of microseconds. We achieve this by combining two complementary methods to characterize and compensate for pulse distortions. We have deployed this approach successfully in a quantum error correction experiment calibrating 24 flux-activated two-qubit gates. Reliable calibration methods, as the ones presented here, are essential in experiments scaling up superconducting quantum processors.
The quantum gate is the foundation of quantum computation and simulation in superconducting circuits. In recent years, quantum systems with three energy levels have attracted much attention. Therefore, it is essential to study the protocol of the quantum‐state transfer in qutrits. Herein, the all‐microwave schemes are studied to realize the state transfer and quantum gates. First, the ∣fg>–∣ge> transition is designed in a superconducting circuit with a relatively large coupling. We measured the Stark shift in cases where the experimental parameters did not satisfy the dispersive condition. Then, by carefully calibrating the pulse parameters, the regular Rabi oscillation and the state transfer are realized between the second excited state of two qubits via stimulated Raman adiabatic passage.
Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but with only two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multidimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this Letter, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on:off ratio. It therefore offers both high efficiency and low crosstalk between qutrits, thus being friendly for scaling up. Our Letter constitutes an important step toward scalable qutrit-based quantum computation.