Dissipation and noise in mean field dynamicsIn Chapter 6 we presented the main computational schemes to derive the dynamical laws for the mean field, including the back-reaction from quantum fluctuations.These equations may be derived from the variation of the CTPEA.The result of this approach is a semiclassical theory of a c-number condensate interacting with a quantized fluctuation field.This approach developed at this level of sophistication is limited as it offers no description of the fluctuations themselves.In most applications the magnitude of the fluctuations can be comparable and at times dominates the effects of the mean field in the semiclassical description.One possible way to incorporate fluctuations is to use the 2PI formalism, where the propagators describing the fluctuations are considered as dynamical variables evolving along with the mean fields.In this chapter we shall explore a different strategy, which is to allow for a stochastic component in the mean field.This component arises from both the uncertainty of the initial configuration of the mean field, and from the fluctuations in the back-reaction from the quantized excitations.Both sources of randomness combine so that stochastic averages in the noisy theory reproduce suitable quantum averages in the underlying quantum field theory.Formally, this approach lifts the seemingly overladen CTPEA.So far in this generally complex object, only the real part is enlisted in the derivation of the relevant equations of motion of the mean field.By regarding the CTPEA as a kind of influence functional, we shall see that the imaginary part contains the information about the stochastic sources.The material in this chapter also clarifies the relationship between the CTP and the influence functional approaches.This issue has been addressed by Su et al. [SCYC88] and the authors [CalHu94].In Chapter 5, we derived a Langevin equation for the long-wavelength modes of a quantum field, viewed as an open system interacting with the environment made up of short-wavelength modes.The system-environment divide we shall assume in this chapter is more elusive, since it depends on the c vs. q-number nature rather than on the value of a "hard" observable such as wavelength.In the end, as we shall discuss in detail, the physics is very much the same in one or the other approach.The stochastic mean field approach we shall discuss in this chapter has the redeeming feature that it does not force us to choose an a priori separation between modes which go into the system and which are relegated to the environment.In this sense, it is more pliable to the demands of a particular application: for example, if
Dissipation and noise in mean field dynamicsIn Chapter 6 we presented the main computational schemes to derive the dynamical laws for the mean field, including the back-reaction from quantum fluctuations.These equations may be derived from the variation of the CTPEA.The result of this approach is a semiclassical theory of a c-number condensate interacting with a quantized fluctuation field.This approach developed at this level of sophistication is limited as it offers no description of the fluctuations themselves.In most applications the magnitude of the fluctuations can be comparable and at times dominates the effects of the mean field in the semiclassical description.One possible way to incorporate fluctuations is to use the 2PI formalism, where the propagators describing the fluctuations are considered as dynamical variables evolving along with the mean fields.In this chapter we shall explore a different strategy, which is to allow for a stochastic component in the mean field.This component arises from both the uncertainty of the initial configuration of the mean field, and from the fluctuations in the back-reaction from the quantized excitations.Both sources of randomness combine so that stochastic averages in the noisy theory reproduce suitable quantum averages in the underlying quantum field theory.Formally, this approach lifts the seemingly overladen CTPEA.So far in this generally complex object, only the real part is enlisted in the derivation of the relevant equations of motion of the mean field.By regarding the CTPEA as a kind of influence functional, we shall see that the imaginary part contains the information about the stochastic sources.The material in this chapter also clarifies the relationship between the CTP and the influence functional approaches.This issue has been addressed by Su et al. [SCYC88] and the authors [CalHu94].In Chapter 5, we derived a Langevin equation for the long-wavelength modes of a quantum field, viewed as an open system interacting with the environment made up of short-wavelength modes.The system-environment divide we shall assume in this chapter is more elusive, since it depends on the c vs. q-number nature rather than on the value of a "hard" observable such as wavelength.In the end, as we shall discuss in detail, the physics is very much the same in one or the other approach.The stochastic mean field approach we shall discuss in this chapter has the redeeming feature that it does not force us to choose an a priori separation between modes which go into the system and which are relegated to the environment.In this sense, it is more pliable to the demands of a particular application: for example, if
The time-dependent Hartree-Fock (TDHF) and density functional theory (DFT) are among the most useful approaches within mean-field theories for studying static and dynamic properties of complex many-body systems in different branches of physics. Despite the fact that they provide a good approximation for the average properties of one-body degrees of freedoms, they are known to fail to include quantal fluctuations of collective observables and they do not provide sufficient dissipation of collective motion. In order to incorporate these missing effects the stochastic mean-field (SMF) approach was proposed (Ayik 2008). In the SMF approach a set of stochastic initial one-body densities are evolved. Each stochastic one-body density matrix consists of a set of stochastic Gaussian random numbers that satisfy the first and second moments of collective one-body observables. Recent works indicate that the SMF approach provides a good description of the dynamics of the nuclear systems (Yilmaz et al. 2018; Ayik et al. 2019). In this work, the one-dimensional Fermi-Hubbard model is simulated with the SMF approach by using different distributions such as Gaussian, uniform, bimodal and two-point distributions. The dissipative dynamics are discussed and the predictive power of the SMF approach with different probability distributions are compared with each other and the exact dynamics. As a result it is shown that by considering different distributions, the predictive power of the SMF approach can be improved.
Building upon the work of Hu, Paz, and Zhang [1,2] on open quantum systems we consider the quantum Brownian motion (QBM) model with one oscillator (position variable x) as the system, {\it nonlinearly} coupled to an environment of N harmonic oscillators (with mass mn, natural frequency ωn, position qn and momentum pn variables) in the form ∑n(vn1(x)qnk+vn2(x)pnl) where k,l are integers (the present work only considers the k=l=2 cases). The vertex functions $v_{n1}, v_{n2} $ are of the form vn1=λCn1f(x),vn2(x)=−λCn2mn−2ωn−2f(x) where Cn1,2 are the coupling constants with the nth oscillator, f(x) is any arbitrary function of x, and λ is a dimensionless constant. Employing the closed-time-path formalism the influence action SIF is calculated using a perturbative expansion in λ. It is possible to identify the terms in SIF quadratic or higher in Δ(s)≡f(x+(s))−f(x−(s)) to constitute the noise kernel, while terms linear in Δ to that of the dissipation kernel. The non-Gaussian noise kernel gives rise to non-zero three-point correlation function of the corresponding stochastic force. The pathway presented here should be useful for the exploration of \textit{non-Gaussian properties of systems nonlinearly coupled with their environments}; examples in early universe cosmology and in quantum optomechanics (QOM) are mentioned. A modified fluctuation-dissipation relation (FDR) is also established, which ensures the consistency of the model and the accuracy of results even at higher perturbative orders. Another result of significance is the derivation of a nonlinear Langevin equation which is expected to be useful for many open quantum system applications.
For a quantum system describable in a Markoffian way, via a set of variables $\mathrm{a}={{a}_{1}, {a}_{2}, \ensuremath{\cdots}}$, we show that the Langevin noise sources ${F}_{\ensuremath{\mu}}$ in the operator equations of motion $\frac{d{a}_{\ensuremath{\mu}}}{\mathrm{dt}}={A}_{\ensuremath{\mu}}(\mathrm{a})+{F}_{\ensuremath{\mu}}$ possess second moments $〈{F}_{\ensuremath{\mu}}(t){F}_{\ensuremath{\nu}}(u)〉=2〈{D}_{\ensuremath{\mu}\ensuremath{\nu}}(\mathrm{a}, t)〉\ensuremath{\delta}(t\ensuremath{-}u)$. The diffusion coefficients ${D}_{\ensuremath{\mu}\ensuremath{\nu}}$ can be determined from a knowledge of the mean equations of motion via the (exact) time-dependent Einstein relation $2〈{D}_{\ensuremath{\mu}\ensuremath{\nu}}〉=\ensuremath{-}〈{A}_{\ensuremath{\mu}}{a}_{\ensuremath{\nu}}〉\ensuremath{-}〈{a}_{\ensuremath{\mu}}{A}_{\ensuremath{\nu}}〉+\frac{d〈{a}_{\ensuremath{\mu}}(t){a}_{\ensuremath{\nu}}(t)〉}{\mathrm{dt}}$, where 〈〉 represents a reservoir average. The sources ${F}_{\ensuremath{\mu}}$, ${F}_{\ensuremath{\nu}}$ do not commute with one another, and as a result the commutation rules of the ${a}_{\ensuremath{\mu}}$ are shown to be preserved in time. The mean motion and diffusion coefficients are calculated for a harmonic oscillator, and for a set of atomic levels. We prove that two dynamically coupled systems (e.g., field and atoms) have uncorrelated Langevin forces if they are coupled to independent reservoirs. Radiation-field-atom coupling adds no new noise sources. We thus obtain simply the maser model including noise sources used in Quantum Noise V. Direct calculations of the mean motion and fluctuations in a system coupled to a reservoir yield relationships in agreement with the Einstein relation. For reservoirs violating time reversal, anomalous frequency shifts are found possible that violate the Ritz combination principle since $\ensuremath{\Delta}{\ensuremath{\omega}}_{12}+\ensuremath{\Delta}{\ensuremath{\omega}}_{23}+\ensuremath{\Delta}{\ensuremath{\omega}}_{31}$ need not vanish.
In the last chapter, we dealt with the wide class of physical operations that preserve the Gaussian character of the initial state, treating them as discrete transformations. Here, we describe what could loosely be considered the continuous-time version of such transformations. This chapter is intended to provide the reader with the tools to describe a wide range of notable quantum dynamics, with a very broad applicative scope. After a note on the action of linear and quadratic Hamiltonians, whose description follows directly from the theory of Gaussian states presented in Chapter 3 but was not explicitly clarified so far, we shall address systems linearly coupled to a reservoir of modes that are delta-correlated in time (a situation commonly referred to as ‘white noise’), and thus give rise to Markovian dynamics which we shall refer to as ‘diffusive’ for reasons that will be made clear in due time. Our story will commence with a derivation of the Gaussian dynamics resulting from such an environmental coupling, in the form of dynamical equations for the first and second statistical moments. Besides their interest per se , the latter will be instrumental in obtaining an unconventional derivation of the master equations that govern general, not necessarily Gaussian, quantum states under the same conditions. The corresponding quantum Langevin equations for the canonical operators in the Heisenberg picture will also be derived. Next, we will turn our attention to the study of the system's dynamics that result from the measurement of the environment. This is a topic with a longstanding tradition in quantum mechanics, grounded in the formalism of quantum stochastic calculus that emerged within the mathematical physics community as early as the seventies, and then re-introduced as the quantum trajectories approach in quantum optics almost twenty years later. The ‘weak’ POVMs resulting from observing a weakly coupled environment (as opposed to ‘strong’, projective measurements), carried out continuously in time (a prescription customarily subsumed by the term ‘monitoring’), leads to a stochastic dynamics for the system, where the randomness of the measurement outcomes is compactly and most elegantly represented by infinitesimal stochastic increments, giving rise to continuous but not differentiable quantum dynamics. Existing approaches to this subject tend to be quite impervious to the uninitiated. In the quantum optics literature, this is largely due to the technicalities involved in incorporating the discontinuous update of the quantum state prescribed by the von Neumann postulate. More mathematically oriented treatments have instead typically preferred an algebraic approach where the usual difficulty of describing measurements in the Heisenberg picture is compounded by the adoption of a rather abstract hierarchy of filters, in part inspired by classical control theory, to describe different possible updates of the quantum state. This state of affairs is further complicated by the added difficulties that come with the necessary introduction of some form of quantum stochastic calculus. Our approach to monitoring will therefore take a different route. Like in our derivation of diffusion and master equations, we shall keep restricting to linear couplings with a white noise environment, forfeiting full generality This situation is well modelled by the so called input-output formalism, whose physical origin will be discussed in detail in Chapter 9 , which approximates reliably, among other instances, the interaction between internal resonating modes and electromagnetic radiation leaking in and out of an optical cavity. First, we shall introduce stochastic Wiener increments and the Itô rule, which will arise naturally from the identification of the continuum field's modes subject to monitoring. We shall deliberately keep our arsenal of stochastic methods to these bare essentials, sacrificing to some extent both depth and generality, but still providing the reader with a powerful and seminal demonstration of the formalism. We shall then restrict to Gaussian general-dyne detections and apply the exact formalism developed in the previous chapter to the continuous filtering of the system's state conditioned by such measurements' outcomes. Next, as in our derivation of the unconditional master equations, we shall use the Gaussian dynamics as a key to unlock the full stochastic master equations governing general states. Hence, we will build on the quantum theory of filtering in the Gaussian regime to derive dynamical equations for linear feedback control and also apply our theoretical tools to the enhanced production of squeezing. Finally, we will turn to the closely related paradigm of coherent feedback, where environmental modes do not undergo measurements but are fed back to interact coherently with the system, see in detail how it modifies Gaussian diffusive dynamics and assess its potential for control by reconsidering the production of squeezing assisted by interferometric coherent feedback loops.
The exact dynamics of a system coupled to an environment can be described by an integro-differential stochastic equation for the reduced density. The influence of the environment is incorporated through a mean field which is both stochastic and nonlocal in time and where the standard two-time correlation functions of the environment appear naturally. Since no approximation is made, the presented theory incorporates exactly dissipative and non-Markovian effects. Applications to the spin-boson model coupled to a heat bath with various coupling regimes and temperature show that the presented stochastic theory can be a valuable tool to simulate exactly the dynamics of open quantum systems. Links with the stochastic Schrödinger equation method and possible extensions to "imaginary time" propagation are discussed.