Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Physics

Cold atom inertial sensors for navigation applications

Michael J. Wright, Luke Anastassiou, Chinmaya Mishra, James M. Davies, Alexander M. Phillips, Simon R. Maskell, Jason F. Ralph

Published Oct 3, 2022• 31 citations
Publisher

Abstract

Quantum sensors based on atom interferometers can provide measurements of inertial quantities with unprecedented accuracy and precision. It has been suggested that this sea change in sensing could provide an inertial navigation capability that is comparable with current satellite based navigation systems. However, the accuracy of sensor measurements is not the only factor that limits the accuracy of inertial navigation systems. In this paper, we explore the fundamental limits to inertial navigation, and explain how quantum inertial sensors could be used to alleviate some of the problems encountered in current classical inertial navigation systems, but not to solve the fundamental instability inherent in inertial navigation methods.

DOI
10.3389/fphy.2022.994459

Related papers

Navigation Error Analysis of Atom Interferometer Inertial Sensor

Christopher Jekeli

The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.

NAVIGATION Journal of the Institute of Navigation•Mar 1, 2005•107 citations

Cold Atom Sensors in Space Applications: A Global Scenario

Hriday Dath, V N Radhika, A R Rekha +2 more

In recent years, quantum technology has attracted attention in inertial navigation, especially due to its extreme sensitivity to inertial forces and strong immunity to drifts, which plague conventional sensors. There are multiple groups around the world working on cold atom interferometry aiming to develop high sensitive inertial sensors for very high accuracy autonomous navigation. Recent advancements in micro-fabrication technologies have helped in development of robust and miniaturized atom interferometry based high performance inertial systems. These, in future, will pave way for autonomous satellite inertial navigation sensors based on cold atoms. Here we discuss the achievements towards realizing cold atom inertial sensors and their indomitable role as inertial sensors for future satellites. A detailed survey on the initiatives taken by different space agencies, their achievements and their plans to explore its potential in space are also discussed.

•Apr 7, 2021•0 citations

Vectorial quantum sensors

Philippe Bouyer

Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.

Optical and Quantum Sensing and Precision Metrology II•Mar 9, 2022•0 citations

Cold atom interferometry for inertial sensing in the field

Ravi Kumar, Ana Rakonjac

Abstract Atom interferometry is one of the most promising technologies for high precision measurements. It has the potential to revolutionise many different sectors, such as navigation and positioning, resource exploration, geophysical studies, and fundamental physics. After decades of research in the field of cold atoms, the technology has reached a stage where commercialisation of cold atom interferometers has become possible. This article describes recent developments, challenges, and prospects for quantum sensors for inertial sensing based on cold atom interferometry techniques.

Advanced Optical Technologies•Aug 31, 2019•5 citations

Future Inertial Atomic Quantum Sensors: State of Art

A. Giorgini, Fiodor Sorrentino, Marella de Angelis +22 more

Summary form only given. A collaboration between European research groups is developing novel atomic inertial quantum sensors based on matter-wave optics and Raman interferometry. For this purpose we are implementing a gravimeter and a gyroscope using ultra cold atoms as test masses. Inertial quantum sensors could represent a new tool for the precise detection of faint forces and tiny rotations. According to the principle of these sensors, the measured physical quantity will be converted into a frequency, which can be measured with highest accuracy. The items of atom interferometry will range from fundamental physical tests to many practical applications such as: local gravity measurements, allowing a precise underground mapping, and space navigation. In this contest the main goal is to realize modular and portable systems.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•0 citations

Hybrid Inertial sensors – future prospects of inertial sensors based on atom interferometry fused with opto-mechanical accelerometers

M. Warner, Jens Große, Lisa Wörner +6 more

Positioning currently relies heavily on Global Navigation Satellite Systems (GNSS). Combined with classical accelerometers and gyroscopes, precise determination of orientation and position at any given time become available. However, but the availability of GNSS (e.g. GPS) is limited and not guaranteed at all times.In this paper we present an alternative based on atom interferometry using cold atom ensembles. An inertial sensor based on cold atoms allows, in theory, for nearly drift-free measurements of inertial forces with accuracies unreached by classical sensors, but the technology is still locked away in large physics laboratories [1].This paper introduces a compact device called SECAMP, which is capable of cooling atoms down to μ-Kelvin. SECAMP has the potential to measure inertial acceleration in three degrees of freedom. In the following, we present the current experimental setup of the apparatus and outline the next steps for the inertial sensor.

DGON Inertial Sensors and Systems (ISS)•Sep 1, 2019•1 citation
Quantum sensors based on atom interferometers can provide measurements of inertial quantities with unprecedented accuracy and precision. It has been suggested that this sea change in sensing could provide an inertial navigation capability that is comparable with current satellite based navigation systems. However, the accuracy of sensor measurements is not the only factor that limits the accuracy of inertial navigation systems. In this paper, we explore the fundamental limits to inertial navigation, and explain how quantum inertial sensors could be used to alleviate some of the problems encountered in current classical inertial navigation systems, but not to solve the fundamental instability inherent in inertial navigation methods.
The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.
In recent years, quantum technology has attracted attention in inertial navigation, especially due to its extreme sensitivity to inertial forces and strong immunity to drifts, which plague conventional sensors. There are multiple groups around the world working on cold atom interferometry aiming to develop high sensitive inertial sensors for very high accuracy autonomous navigation. Recent advancements in micro-fabrication technologies have helped in development of robust and miniaturized atom interferometry based high performance inertial systems. These, in future, will pave way for autonomous satellite inertial navigation sensors based on cold atoms. Here we discuss the achievements towards realizing cold atom inertial sensors and their indomitable role as inertial sensors for future satellites. A detailed survey on the initiatives taken by different space agencies, their achievements and their plans to explore its potential in space are also discussed.
Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.
Abstract Atom interferometry is one of the most promising technologies for high precision measurements. It has the potential to revolutionise many different sectors, such as navigation and positioning, resource exploration, geophysical studies, and fundamental physics. After decades of research in the field of cold atoms, the technology has reached a stage where commercialisation of cold atom interferometers has become possible. This article describes recent developments, challenges, and prospects for quantum sensors for inertial sensing based on cold atom interferometry techniques.
Summary form only given. A collaboration between European research groups is developing novel atomic inertial quantum sensors based on matter-wave optics and Raman interferometry. For this purpose we are implementing a gravimeter and a gyroscope using ultra cold atoms as test masses. Inertial quantum sensors could represent a new tool for the precise detection of faint forces and tiny rotations. According to the principle of these sensors, the measured physical quantity will be converted into a frequency, which can be measured with highest accuracy. The items of atom interferometry will range from fundamental physical tests to many practical applications such as: local gravity measurements, allowing a precise underground mapping, and space navigation. In this contest the main goal is to realize modular and portable systems.
Positioning currently relies heavily on Global Navigation Satellite Systems (GNSS). Combined with classical accelerometers and gyroscopes, precise determination of orientation and position at any given time become available. However, but the availability of GNSS (e.g. GPS) is limited and not guaranteed at all times.In this paper we present an alternative based on atom interferometry using cold atom ensembles. An inertial sensor based on cold atoms allows, in theory, for nearly drift-free measurements of inertial forces with accuracies unreached by classical sensors, but the technology is still locked away in large physics laboratories [1].This paper introduces a compact device called SECAMP, which is capable of cooling atoms down to μ-Kelvin. SECAMP has the potential to measure inertial acceleration in three degrees of freedom. In the following, we present the current experimental setup of the apparatus and outline the next steps for the inertial sensor.