Light Pulse Atom lnterferometryLight Pulse Atom Interferometers (LPAI) utilize Raman or Bragg transitions to coherently split, redirect, and recombine atomic wave packets.1In free space LPAIs, light pulses impart momentum kicks to freely expanding cold atomic clouds released from rest.During the atom-light interaction, the laser phase is imprinted onto the atom's wave function.Atoms experience different phase shifts along each interferometer arm which gives us information about their spatial trajectories and thus their local acceleration.The quadratic dependence of the phase shift on the interrogation time, T, have prompted researchers to increase the system's size.For field use, however, smaller compact devices are desired.Guided atom interferometers confine atoms spatially, increasing the interrogation time while minimizing the laser power needed to drive these systems. Beam 4litterIg,p) Mirror
Light Pulse Atom lnterferometryLight Pulse Atom Interferometers (LPAI) utilize Raman or Bragg transitions to coherently split, redirect, and recombine atomic wave packets.1In free space LPAIs, light pulses impart momentum kicks to freely expanding cold atomic clouds released from rest.During the atom-light interaction, the laser phase is imprinted onto the atom's wave function.Atoms experience different phase shifts along each interferometer arm which gives us information about their spatial trajectories and thus their local acceleration.The quadratic dependence of the phase shift on the interrogation time, T, have prompted researchers to increase the system's size.For field use, however, smaller compact devices are desired.Guided atom interferometers confine atoms spatially, increasing the interrogation time while minimizing the laser power needed to drive these systems. Beam 4litterIg,p) Mirror
We demonstrate a light-pulse atom interferometer based on the diffraction of free-falling atoms by a picosecond frequency-comb laser. More specifically, we coherently split and recombine wave packets of cold ^{87}Rb atoms by driving stimulated Raman transitions between the |5s ^{2}S_{1/2},F=1⟩ and |5s ^{2}S_{1/2},F=2⟩ hyperfine states, using two trains of picosecond pulses in a counterpropagating geometry. We study the impact of the pulses' length as well as the interrogation time onto the contrast of the atom interferometer. Our experimental data are well reproduced by a numerical simulation based on an effective coupling that depends on the overlap between the pulses and the atomic cloud. These results pave the way for extending light-pulse interferometry to transitions in other spectral regions and therefore to other species, for new possibilities in metrology, sensing of gravito-inertial effects, and tests of fundamental physics.
A picosecond laser is used to realize atomic beam splitters based on stimulated Raman transitions. With this approach, the interaction between the laser and the atom is localized in the overlap zone of pairs of counterpropagating picosecond pulses. This imposes constraints for implementing interferometers on free-falling atoms. We have developed a robust technique to control the pulses' overlap and ensure that it follows the atom's trajectory while minimizing the induced laser phase noise. We also demonstrate an atom interferometer where the atomic beam splitters are applied to one arm of the interferometer without interacting with the atomic wave packet propagating along the other arm.
Sodium atoms prepared in hyperfine ground-state 11 > are driven to the other ground-state hyperfine level 12> when two laser beams nearly resonant with an optical transition have a frequency difference equal to the ground-state hyperfine splitting. When the two laser beams are counterpropagating, conservation of momentum between the atom and the light field requires that the atom acquire a velocity kick ~22 ħk/m during the 11> and 12> transition (~6 cm/sec in our experiment). When the lasers are detuned far from the optical transition, spontaneous emission from the intermediate optical level becomes negligible, and the atom behaves as a two-level system coupled to a resonant rf driving field. We have created an interferometer by applying a π/2-π-π/2 Raman pulse sequence: a first π/2 pulse coherently splits the atomic wave packet by putting it in a superposition of states 11> and 12>, a second π pulse occurring a time Δt later redirects each wave packet and a final π/2 pulse recombines the wave packets at time 2Δt. We have observed wave packet interference for wave packet separations of 2.4 mm and, by using the interferometer as an accelerometer, have measured the atom’s acceleration due to gravity to 3 parts in 106.
Atom interferometry relies on the separation and recombination of atom wavepackets. When the two paths overlap perfectly at the end of the interferometer, the phase is insensitive to the atomic velocity distribution. Here, we show that, when the separation and recombination is performed using a Raman transition there is a displacement of the atomic wavepacket due to a phase shift during light pulses. Because of the variation of the laser intensity seen by the atoms, there is an imperfect cancellation of these displacements. The observation of a velocity-dependent phase shift on the interferometer is the signature of this effect, which has been modeled. Thanks to the signature we have identified, we are able to compensate for this effect by applying laser power ramps during the interferometer to mitigate intensity variations.
Atom interferometers have been successfully applied for precision measurements and the realization of basic gedanken experiments [1]. They consist of three or more atom optical elements to split, redirect, and recombine the motional state of the atoms. These elements are implemented either by freestanding microstructures or by light fields. For high precision applications, such as gyroscopes [2–5], a large throughput of the initial atomic flux is advantageous [6]. In order to efficiently use all atoms in an uncollimated thermal atomic beam, the ideal atom interferometer should produce equally spaced fringes for a wide range of transverse and longitudinal velocities. So called “white light” interferometers solve the problem for different longitudinal velocities by the recombination of only two velocity independent transverse momentum states at the output of the interferometer. Examples for this are the three-grating interferometer [7], operating with a transversely collimated beam, and the Raman interferometer [8]. Operation using a transversely uncollimated atomic beam can also be realized by the Raman interferometer and, for interferometers that do not require light, by the Talbot-Lau interferometer [9]. The latter, in contrast to Ref. [7], operates with three gratings in the Fresnel regime of matter wave diffraction. Since, in this case, many different momentum components build up the interference pattern, the typical length scale of the setup, the Talbot length, depends on the atomic velocity. The Talbot-Lau interferometer is, therefore, chromatic. In this work, we study a charged wire as the central element in an atom interferometer that requires only microstructures, operates in the Fresnel regime, and accepts, therefore, an uncollimated beam of atoms. At the same time, it has essentially white light character over the range of the atomic velocities in our thermal atomic beam. This makes future extensions of our approach based on microstructures potentially as powerful as, for example, the Raman interferometer gyroscope [5]. The attractive interaction between the induced dipole and the charged wire redirects the atomic trajectories to form a simple interferometer with two spatially separated paths. It can, therefore, also be used to measure the recently proposed topological phase shifts for moving electric dipoles [10–13].
Atom interferometry, in which atomic waves are coherently split and later recombined, has been called the Swiss Army knife of atomic physics because of its numerous applications [1]. Atom interferometers can be used to study gravity, observe quantum effects, and measure fundamental constants. However, the spitting of atomic beams has always been a challenging task. Several beam splitters for atoms have been developed over the years, many of which rely on complex, high-powered lasers whose photons collide with atoms to steer them along separate beam paths. Paul Hamilton and colleagues at the University of California, Berkeley, have built a more versatile beam splitter by using, for the first time, an optical cavity [2]. Laser pulses bounce back and forth inside the cavity, increasing the effective power in standing waves of light and reducing imperfections in the wave fronts. The light concentration within the cavity allows the use of common low-powered lasers for the initial pulses. The new design may lead to a universal atom interferometer with optical gratings that works with a wide range of atomic species.