Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Information Technology and Nanotechnology (ITNT)

Development of automatic control of optical signal gain in a atomic frequency standard based on rubidium-87 atoms

Artyom V. Shavshin

Published May 23, 2022• 4 citations
Publisher

Abstract

The necessity of developing a new design for automatic control of the optical signal gain to ensure the stability of the output parameters of the atomic frequency standard (AFS) based on rubidium-87 atoms under various external conditions of its operation is substantiated. This is especially true during the operation of this AFS as part of mobile objects for various purposes. A new scheme for automatic gain control in the optical path of an AFS based on rubidium-87 atoms is presented. The amplifier of the error signal formed on the photodetector for controlling the microwave signal is considered in detail. An experiment was carried out, and its final metrological characteristics were presented for the atomic frequency standard based on rubidium atoms - 87 with automatic gain control. The validity of the developed automatic amplification scheme for the new frequency standard based on rubidium atoms-87 is confirmed.

DOI
10.1109/itnt55410.2022.9848676

Related papers

Digital processing of optical signals in the frequency standard based in rubidium atoms - 87

Kseniya Arinushkina, Anton Valov, Vadim Vladimirovich Davydov

The necessity of improving the characteristics of metrological for quantum standard of frequency when determining the coordinates of an object on the Earth’s surface or long-term broadcast of large quantity of data in satellite communication systems justified. A new algorism for digital processing of optical signals in the frequency standard is proposed to obtain information about the accuracy signal with making the method of median filtering. The results a research of experimental a characteristics of metrological for quantum standard of frequency based to rubidium - 87 atoms are presented. It is found that improving the long-term frequency stability by 5% using the new algorithm lower the number of bit errors for a long broadcasting information by at least 3%. Also, the error of determining the coordinates of the object is increased by at least 15%.

International Conference on Information Technology and Nanotechnology (ITNT)•Sep 20, 2021•0 citations

Features of the formation of the frequency of the microwave excitation signal in the quantum frequency standard on rubidium atoms - 87

A S Grevtseva, Roman Dmitriev, Vadim Vladimirovich Davydov +1 more

Abstract The article discusses the main disadvantages of the current design of a quantum frequency standard based on rubidium-87 atoms. The main disadvantages of the current design of the quantum frequency standard on rubidium-87 atoms are considered. It is noted that the processes associated with light shifts in the optical part contribute to the greatest instability in the long-term operation of the quantum frequency standard. A solution is proposed to improve the design of the rubidium standard. A forecast for improving its metrological characteristics is presented. The results of experimental investigations are presented.

Journal of Physics Conference Series•Dec 1, 2021•3 citations

The use of digital data processing to improve the metrological characteristics of the rubidium frequency standard

Anton Valov, Kseniya Arinushkina, Vadim Vladimirovich Davydov +1 more

Abstract The necessity of improving the metrological characteristics of a quantum frequency standard when determining the coordinates of an object on the Earth’s surface or long-term transmission of large amounts of data in satellite communication systems is substantiated. A new algorithm for digital processing of optical signals in the frequency standard is proposed. The results of experimental studies of the metrological characteristics of a quantum frequency standard based on rubidium atoms - 87 are presented

Journal of Physics Conference Series•Dec 1, 2021•2 citations

Features the used of microwave quantum frequency standard on rubidium atoms – 87 in systems of time synchronization for space system communication

A S Grevtseva, Vadim V. Davydov, Roman Dmitriev +1 more

The main problems arising during the operation of satellite information systems during the transmission of large amounts of information are considered. It is noted how the disadvantages of the current design of the quantum frequency standard based on rubidium-87 atoms influence the operation of the information transmission system. It is noted that the greatest instabilities during long-term operation of the quantum frequency standard are introduced by processes associated with light shifts in the optical part. Frequency stability decreases, synchronization of time scales of various communication satellites deteriorates. This leads to an increase in the number of errors in the transmission of information. A solution is proposed to improve the metrological characteristics of the rubidium frequency standard. The results of experimental studies of the operation of a satellite information transmission system are presented.

International Conference on Future Networks and Distributed Systems (ICFNDS)•Dec 15, 2021•0 citations

Control algorithms in quantum frequency standards based on the effect of coherent population trapping

Danil A. Paryohin

The problem of developing control algorithms in quantum frequency standards based on the effect of coherent population trapping is considered. The development of such algorithms will make it possible to create frequency standards with metrological characteristics that are not inferior to the characteristics of rubidium frequency standards, with reduced power consumption and overall dimensions. A method for studying the dependence of the actual value and frequency instability of quantum frequency standards based on the effect of coherent population trapping on the operating modes of individual parts of the standards is presented. As a criterion for optimizing the laser injection current, the output power of the microwave generator, and the cell temperature, we chose to minimize the effect on the shift of the actual frequency of the standard. A comparative analysis of methods for changing the radiation intensity of a surface-emitting laser with a vertical resonator has been carried out and control algorithms have been developed that take into account the features of these methods. Based on these algorithms, software and tuning methods have been developed in quantum frequency standards based on the effect of coherent population trapping. For the prototype standard, the results of measuring the frequency instability are shown. It is shown that control algorithms and tuning methods can qualitatively change the metrological characteristics of quantum frequency standards based on the effect of coherent population trapping.

Izmeritel`naya Tekhnika•Jan 1, 2021•0 citations

Laser-optical system of atomic interferometer based on cold rubidium atoms.

G. V. Osipenko, M. S. Aleynikov, Ju. V. Pashkova +1 more

The paper presents the results of the development of a laser-optical system for atomic interferometer based on rubidium atoms cooled to sub-Doppler temperatures. The laser-optical scheme was created to ensure the processes of cooling, pumping, and detecting atoms involved in interferometric measurements of free-fall acceleration. The system utilizes frequency doubled fiber lasers and broadband fiber electro-optical modulators. The choice of fiber lasers is driven by their high efficiency, narrow spectral line, low phase noise levels, as well as ease of operation and reliability. Laser frequency stabilization was carried out using modulation transfer spectroscopy and optical phase-locking methods. Experimental setups were described that allow the generation of multichromatic radiation and minimize spontaneous scattering by detuning from excited levels. It was noted that the design provides a full set of optical frequencies necessary for Raman spectroscopy. The amplitudes of frequency fluctuations of the cooling and pumping lasers were studied. It was shown that the implemented laser-optical system can ensure continuous operation of an atomic interferometer based on clouds of cold rubidium atoms, and an assessment of the fundamental sensitivity limit was conducted.

Izmeritel`naya Tekhnika•Apr 3, 2025•0 citations
The necessity of developing a new design for automatic control of the optical signal gain to ensure the stability of the output parameters of the atomic frequency standard (AFS) based on rubidium-87 atoms under various external conditions of its operation is substantiated. This is especially true during the operation of this AFS as part of mobile objects for various purposes. A new scheme for automatic gain control in the optical path of an AFS based on rubidium-87 atoms is presented. The amplifier of the error signal formed on the photodetector for controlling the microwave signal is considered in detail. An experiment was carried out, and its final metrological characteristics were presented for the atomic frequency standard based on rubidium atoms - 87 with automatic gain control. The validity of the developed automatic amplification scheme for the new frequency standard based on rubidium atoms-87 is confirmed.
The necessity of improving the characteristics of metrological for quantum standard of frequency when determining the coordinates of an object on the Earth’s surface or long-term broadcast of large quantity of data in satellite communication systems justified. A new algorism for digital processing of optical signals in the frequency standard is proposed to obtain information about the accuracy signal with making the method of median filtering. The results a research of experimental a characteristics of metrological for quantum standard of frequency based to rubidium - 87 atoms are presented. It is found that improving the long-term frequency stability by 5% using the new algorithm lower the number of bit errors for a long broadcasting information by at least 3%. Also, the error of determining the coordinates of the object is increased by at least 15%.
Abstract The article discusses the main disadvantages of the current design of a quantum frequency standard based on rubidium-87 atoms. The main disadvantages of the current design of the quantum frequency standard on rubidium-87 atoms are considered. It is noted that the processes associated with light shifts in the optical part contribute to the greatest instability in the long-term operation of the quantum frequency standard. A solution is proposed to improve the design of the rubidium standard. A forecast for improving its metrological characteristics is presented. The results of experimental investigations are presented.
Abstract The necessity of improving the metrological characteristics of a quantum frequency standard when determining the coordinates of an object on the Earth’s surface or long-term transmission of large amounts of data in satellite communication systems is substantiated. A new algorithm for digital processing of optical signals in the frequency standard is proposed. The results of experimental studies of the metrological characteristics of a quantum frequency standard based on rubidium atoms - 87 are presented
The main problems arising during the operation of satellite information systems during the transmission of large amounts of information are considered. It is noted how the disadvantages of the current design of the quantum frequency standard based on rubidium-87 atoms influence the operation of the information transmission system. It is noted that the greatest instabilities during long-term operation of the quantum frequency standard are introduced by processes associated with light shifts in the optical part. Frequency stability decreases, synchronization of time scales of various communication satellites deteriorates. This leads to an increase in the number of errors in the transmission of information. A solution is proposed to improve the metrological characteristics of the rubidium frequency standard. The results of experimental studies of the operation of a satellite information transmission system are presented.
The problem of developing control algorithms in quantum frequency standards based on the effect of coherent population trapping is considered. The development of such algorithms will make it possible to create frequency standards with metrological characteristics that are not inferior to the characteristics of rubidium frequency standards, with reduced power consumption and overall dimensions. A method for studying the dependence of the actual value and frequency instability of quantum frequency standards based on the effect of coherent population trapping on the operating modes of individual parts of the standards is presented. As a criterion for optimizing the laser injection current, the output power of the microwave generator, and the cell temperature, we chose to minimize the effect on the shift of the actual frequency of the standard. A comparative analysis of methods for changing the radiation intensity of a surface-emitting laser with a vertical resonator has been carried out and control algorithms have been developed that take into account the features of these methods. Based on these algorithms, software and tuning methods have been developed in quantum frequency standards based on the effect of coherent population trapping. For the prototype standard, the results of measuring the frequency instability are shown. It is shown that control algorithms and tuning methods can qualitatively change the metrological characteristics of quantum frequency standards based on the effect of coherent population trapping.
The paper presents the results of the development of a laser-optical system for atomic interferometer based on rubidium atoms cooled to sub-Doppler temperatures. The laser-optical scheme was created to ensure the processes of cooling, pumping, and detecting atoms involved in interferometric measurements of free-fall acceleration. The system utilizes frequency doubled fiber lasers and broadband fiber electro-optical modulators. The choice of fiber lasers is driven by their high efficiency, narrow spectral line, low phase noise levels, as well as ease of operation and reliability. Laser frequency stabilization was carried out using modulation transfer spectroscopy and optical phase-locking methods. Experimental setups were described that allow the generation of multichromatic radiation and minimize spontaneous scattering by detuning from excited levels. It was noted that the design provides a full set of optical frequencies necessary for Raman spectroscopy. The amplitudes of frequency fluctuations of the cooling and pumping lasers were studied. It was shown that the implemented laser-optical system can ensure continuous operation of an atomic interferometer based on clouds of cold rubidium atoms, and an assessment of the fundamental sensitivity limit was conducted.