Abstract We investigate the superluminal effect of transmitted probe field in three‐level quantum dot molecules (QDMs) assisted optomechanical system which consist of mechanical resonator. We show that the superluminal behavior of transmitted probe field can be controlled by changing the tunneling strength and number of QDMs inside the cavity. Furthermore, it is shown that in the absence of tunneling strength, the transmitted probe field shows the fast light effect and by increasing the number of QDMs, the enhancement in superluminal behavior is decreased and converts into slow light. While, in the presence of the tunneling strength, with the increase of the number of QDMs the superluminal behavior of transmitted field is obtained at smaller detuning frequency. The influence of tunneling strength and number of QDMs on superluminal part of the transmitted probe field is quite useful in optical memory, optical buffers, and quantum information processing.
Abstract We investigate the superluminal effect of transmitted probe field in three‐level quantum dot molecules (QDMs) assisted optomechanical system which consist of mechanical resonator. We show that the superluminal behavior of transmitted probe field can be controlled by changing the tunneling strength and number of QDMs inside the cavity. Furthermore, it is shown that in the absence of tunneling strength, the transmitted probe field shows the fast light effect and by increasing the number of QDMs, the enhancement in superluminal behavior is decreased and converts into slow light. While, in the presence of the tunneling strength, with the increase of the number of QDMs the superluminal behavior of transmitted field is obtained at smaller detuning frequency. The influence of tunneling strength and number of QDMs on superluminal part of the transmitted probe field is quite useful in optical memory, optical buffers, and quantum information processing.
We explain the probe field transmission spectrum under the influence of a strong pump field in a hybrid optomechanical system, composed of an optical cavity, a mechanical resonator, and a two-level atom. We show fast (superluminal) and slow (subluminal) light effects of the transmitted probe field in the hybrid system for suitable parametric regimes. For the experimental accessible domain, we find that the fast light effect obtained for the single optomechanical coupling can further be enhanced with the additional atom-field coupling in the hybrid system. Furthermore, we report the existence of a tunable switch from fast to slow light by adjusting the atomic detuning with the anti-Stokes and Stokes sidebands, respectively, as ${\mathrm{\ensuremath{\Delta}}}_{a}=+{\ensuremath{\omega}}_{m}$ and $\ensuremath{-}{\ensuremath{\omega}}_{m}$. The reported characteristics are realizable in state-of-the-art laboratory experiments.
In recent years, due to the rapid development of nano science and advanced semiconductor technology, one is able to observe more significant quantum optomechanical effects as optomechanical system turns smaller in size. Optomechanically induced transparency, fast and slow light, optical storage as well as other quantum optical and nonlinear optical effects have become the focus of research. On the other hand, the optomechanical systems coupled to other small subsystems (such as atoms, quantum dots, single electron transistors, etc.) also attract great attention in research. This is because the coupling system has not only provided more degrees of freedom for quantum manipulation, but also opened up more channels for classical and quantum information transfer. In this paper we study the optomechanically induced transparency and fast/slow light phase control in atom-assisted optomechanical cavity. Unlike the traditional systems, in this model the mechanical resonator is directly driven by a weak auxiliary driving field. We therefore find that with the change of amplitude ratio and phase difference between the auxiliary driving field and the probe field, the absorption and dispersion properties of the whole system and the group delay time vary accordingly. In the absence of auxiliary field, we observe the spectral features of the hybrid electromagnetically induced transparency and optomechanically induced transparency (OMIT) in an atom-cavity-oscillator tripartite optomechanical system. When there exists no phase difference between the auxiliary field and the probe field, we find that the membrane resonance absorption is enhanced with the increase of auxiliary field strength at resonance, causing the the optomechanically induced transparency to be suppressed, and therefore we can modify the amplitude of auxiliary field to control the depth of the OMIT window. When keeping amplitude ratio between the auxiliary field and the probe field unchanged, the modification of the phase difference between the auxiliary field and the probe field directly affects the we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption", "transparent" and "gain" of the system. Therefore, through changing the phase of auxiliary field and probe field, we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption" , "transparent" and "gain". In the meantime, we find that the system’s group delay time varies periodically with the change of phase difference. It is worth noting that by adjusting the phase difference and the atomic number, we can not only change the magnitude of the group delay, but also realize the conversion between slow light and fast light effect.
Abstract We theoretically investigated the photothermally and optomechanically induced transparency (PTIT and OMIT) in an optomechanical system filled with quantum dots (QDs). In our proposed system, the right mechanical resonator couples with the optical cavity via radiation pressure, and the left mechanical resonator couples with the optical cavity through the photothermal effects. The system is driven by a strong pump field and a weak probe field. It is shown that double transparency windows can be observed due to PTIT and OMIT. When considering the Jaynes‐Cummings coupling between the QDs and the optical cavity, three transparency windows are observed. We also show that the PTIT can be adjusted by the OMIT and the QDs in the optical cavity. What is more, the coupling strength and the frequency detuning can be used effectively to change the system absorption and dispersion in the PITT transparency window. This indicates that the group delay of the probe light can also be manipulated by the system parameters. The obtained results may be applied in the optical communication such as optical buffer, and so forth.
Abstract We investigate the phenomenon of optomechanically induced transparency assisted by a hybrid two-cavity optomechanical system. The system consists of two optical cavities and four mechanical resonators, and each optical cavity is filled with two-level atomic ensembles. Our study demonstrates that the characteristics of optomechanically induced transparency vary with different coupling parameters. Specifically, the number of transparent windows increases with the introduction of atomic ensembles and Coulomb interaction. Furthermore, the positions of the transparent points can be manipulated by the coupling parameters. It is found that increasing the Coulomb coupling between mechanical oscillators shifts the transparent points further apart. Furthermore, we also explore the slow/fast light effect by analyzing the phase and group delay of the probe field. Our approach enables the control of multiple optomechanically induced transparency and provides potential applications in quantum information processing.
We theoretically investigate the phenomenon of electromagnetically induced transparency (EIT) of a weak probe field in hybrid optomechanics with a single three-level (Λ-type) atomic system. We report that, in the presence of optomechanical coupling and two transition coupling parameters of three-level atom (TLA), there occurs three distinct multiple EIT windows in the probe absorption spectrum. Moreover, the switching of multiple windows into double and single EIT windows can be obtained by suitably tuning the system parameters. Furthermore, the probe transmission spectrum have been studied. Based on our analytical and numerical work, we explain the occurrence of slow and fast light (superluminal) regimes, and enhancement of superluminal behaviour in the probe field transmission. This work demonstrates great potential in multi-channel waveguide, fiber optics and classical communication networks, multi-channel quantum information processing, real quality imaging, cloaking devices and delay lines & optical buffers for telecommunication.
We theoretically investigate the transmission and group delay of a probe field incident on a hybrid optomechanical system, which consists of a mechanical resonator simultaneously coupled to an optical cavity and a two-level system (qubit). The cavity field is driven by a strong red-detuned control field, and a weak coherent mechanical driving field is applied to the mechanical resonator. With the assistance of additional mechanical driving field, it is shown that double optomechanically induced transparency can be switched into absorption due to destructive interference or amplification because of constructive interference, which depends on the phase difference of the applied fields. We study in detail how to control the probe transmission by tuning the parameters of the optical and mechanical driving fields. Furthermore, we find that the group delay of the transmitted probe field can be prolonged by the tuning the amplitude and phase of the mechanical driving field.