The dynamics of magneto-optical trap loading by light-induced atom desorption (LIAD) are investigated theoretically and experimentally. The loading of the MOT has been described by a theoretical model. We have paid close attention to the background gases which are essentially important for the ultimate vacuum pressure. The experiment is done based on a glass cell and all the results are well in agreement with the theory. The decay process of the background vacuum pressure caused by the untrapped cesium atoms after shutting off the desorption light is explained quantitatively. The LIAD effect is proved to be an effective tool to control the loading of the MOT and the neutral single atoms in experiment.
We show that light-induced atom desorption (LIAD) can be used as a flexible atomic source for large
87Rb and
40K magneto-optical traps. The use of LIAD at short wavelengths allows for fast switching of the desired vapor pressure and permits experiments with long trapping and coherence times. The wavelength dependence of the LIAD effect for both species was explored in a range from
630to253nm in an uncoated quartz cell and a stainless steel chamber. Only a few
mW∕cm2 of near-UV light produce partial pressures that are high enough to saturate a magneto-optical trap at $3.5\ifmmode\times\else\texttimes\fi{}{10}^{9}$
87Rb atoms or $7\ifmmode\times\else\texttimes\fi{}{10}^{7}$
40K atoms. Loading rates as high as $1.2\ifmmode\times\else\texttimes\fi{}{10}^{9}$
87Rb atoms/s and $8\ifmmode\times\else\texttimes\fi{}{10}^{7}$
40K atoms/s were achieved without the use of a secondary atom source. After the desorption light is turned off, the pressure quickly decays back to equilibrium with a time constant as short as $200\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, allowing for long trapping lifetimes after the MOT loading phase.
With the help of light-emitting diodes at the center wavelength of 470 nm, we demonstrate that light-induced atom desorption (LIAD) can be used for flexibly controlling the loading of magneto-optical traps (MOT) of cesium atoms. Under an ultralow background pressure in a quartz cell without any wall coating, we show that low intensity blue light can be used to control the loading rates (from 200 to 4000 atoms/s) and the number of cesium atoms (on the order of
104 in our experiment) in a MOT without the use of dispensers or any secondary atom source. A theoretical model based on an atom loading rate equation is built which can simulate the magneto-optical trap loading process with LIAD. The theoretical results are in agreement with experimental data. Some important parameters of the vacuum system are determined accordingly. The decay time of the vacuum pressure is about 70 ms, which is much shorter than the usual vacuum system for experiments on atomic ensembles. It is very difficult to measure such short times by the traditional fluorescence detection of cold atoms due to the slow loading process. The change of desorption rate (on the order of
1013 atoms/s) for the different desorption intensities is also determined based on the background pressure caused by noncesium atoms in the cell. According to the experimental data and theoretical calculations, we obtain a partial pressure of about $1.4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}10}\text{ }\text{Torr}$ for the untrapped cesium atoms and about $6.4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}10}\text{ }\text{Torr}$ for the noncesium atoms at the moment the desorption light is turned off. The system is almost an ideal vacuum system for transferring atoms into another region for further experiments.