Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Investigation of Material Growth and Fabrication Processes for THz Frequency SIS Mixers

Michael E. Cyberey

Published Apr 25, 2014• 5 citations
Publisher

Abstract

Research and development of THz electronics seeks to comprehend and utilize one of the last uncharted regions of the electromagnetic spectrum. Sandwiched directly between the microwave and far-infrared regions, THz devices often involve a hybrid fusion of optical and small-scaled RF technologies, frequently requiring novel design, materials, and fabrication techniques. Despite the increased complexity, when compared to many well-established RF and optical technologies, THz receivers used in telescope imaging applications are of great importance to radio astronomers, with current large scale multinational radio telescope projects, such as the Atacama Large Millimeter/sub-millimeter Array (ALMA) in Chile designed to observe the universe from 31 to 950 GHz--- the field of radio astronomy will be one of the immediate benefactors from the ongoing research of higher frequency THz detection. Heterodyne receivers, based on the Nb/Al-Al2O3/Nb SIS tunnel junction, have demonstrated sensitivities approaching the quantum limit, making them ideal for high-sensitivity THz detectors. However, as design frequencies approach 1 THz and beyond, both the Nb electrodes and Al2O3 tunnel barrier of the prototypical Nb/Al-Al2O3/Nb SIS junction begin to demonstrate poor performance. A turning point in SIS technology was through the development of ICP grown AlN as an alternative barrier material, first reported by our research group in 2007. However, due to run to run variation, our original ICP configuration made realization of AlN based SIS mixers impossible at the time. In this work, we present the modifications of our trilayer deposition system that allowed our research group to realize AlN based SIS mixers meeting all ALMA Band-8 specifications. Additionally, we report on a novel fabrication process that significantly reduced fabrication time of high-quality SIS test devices. ICP nitridation of Al overlayers is inherently a complex process, and little is reported in the literature as to what affects AlN growth. With this in mind, we report on detailed investigations of ICP nitridation, using ellipsometry and spectroscopic analysis, and provide a better understanding of the processes involved in the realization of high-quality ICP grown AlN based SIS trilayer.

DOI
10.18130/v3mz42

Related papers

Fabrication and testing of NbN/MgO/NbN tunnel junctions for use as high-frequency heterodyne detectors

Jeffrey A. Stern

This thesis describes the development and testing of NbN/MgO/NbN tunnel junctions for use as superconductor-insulator-superconductor (SIS) mixers. SIS mixers are the most sensitive heterodyne detectors in the millimeter wavelength region. Most SIS mixers use Pb alloy tunnel junction. These tunnel junctions have several problems associated with the soft nature of Pb and its low superconducting transition temperature. NbN-based tunnel junctions are being developed to overcome these difficulties. These devices are intended to be used as mixers at millimeter and submillimeter wavelengths. This thesis describes the fabrication process involved in making NbN junctions, and the results of measurements on these devices. The purpose of these measurements is to determine the future possibilities of NbN tunnel junctions as high-frequency mixers. The first chapter is an introduction to SIS mixers and explains how tunnel junction properties affect mixer performance. The basic theory of tunneling and mixing in SIS mixers is first presented. A description of quantum mixer theory is included in this presentation. This theory makes several interesting predictions that cannot be explained using classical theories. This is followed by a description of how real SIS tunnel junctions differ from ideal junctions. The physical origin of these differences is discussed, along with how they affect SIS mixer performance. Finally, the advantages and disadvantages of the various superconducting materials available are discussed. The decision to develop NbN devices is based on these material properties. The second chapter describes the methods used to fabricate small-area NbN/MgO/NbN tunnel junctions. The chapter begins with a description of the various methods that have been used to deposit NbN films. Reactive magnetron sputtering is chosen as the best method for tunnel junction fabrication. Details on the vacuum systems and the methods used for depositing superconducting NbN are discussed. Next, the process used for depositing junction trilayers (NbN/MgO/NbN) is described. The probable growth mode of MgO on NbN is presented. The importance of this growth mode to the junction quality is explained in some detail. Next, standard junction processing steps are reported. The details and limitations of each step are put forth. The standard process allows for the fabrication of 1 [square micron] tunnel junctions. Finally, this chapter discusses several methods of fabaricating submicron junctions that are being pursued. The status of this work is given. The third chapter describes the characterization of NbN films and NbN/Mg0/NbN tunnel junctions. Film properties are described first. The correlation of these properties to deposition conditions is discussed in some detail. Next, values for the various features of the I-V characteristic are given; typical and exceptional values are noted. How these features limit mixer results is described in detail. Several important device attributes were measured using superconducting-quantum-interference-devices (SQUIDs). These attributes are the junction's specific capacitance and the film's magnetic penetration depth. The theory and results of measuring specific capacitance and penetration depth are presented. Following the SQUID results is a large section on RP testing. Mixer tests were made at 205 GHz. The receiver design used, integral inductive tuning circuit used and results are discussed. These results are well understood, with the exception of the temperature dependence of the mixer performance. Finally, measurements of the uniformity of many junctions on a single wafer are presented. The importance of junction uniformity is also described. The final chapter discusses the ultimate limits on NbN mixers, and tells what future work must be done to achieve these limits. The primary high-frequency limit on NbN junctions is the capacitance of NbN/MgO/NbN junctions. The limit imposed by the junction capacitance and circuits used to tune out this capacitance are discussed. Also, the low-frequency limits on NbN junctions are discussed. The status of submicron devices is presented. Junction area is the most immediate limitation on NbN mixer results. The possibility of using other barrier materials to increase the RC speed of NbN junctions is presented. Finally, the possibility of operating NbN junctions at temperatures above 4.2 K is discussed.

•Dec 20, 2004•0 citations

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology

Jing Li, Masanori Takeda, Zhen Wang +1 more

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2007•3 citations

Design of Terahertz SIS Mixers Using Nb/AlN/Nb Junctions Integrated With All-NbTiN Tuning Circuits

Yoshinori Uzawa, M. Kroug, Takafumi Kojima +7 more

We have designed superconductor-insulator-superconductor (SIS) mixers using Nb/AlN/Nb tunnel junctions integrated with NbTiN/SiO2/NbTiN microstrip tuning circuits for the Atacama Large Millimeter/submillimeter Array (ALMA) Band 10 (0.78-0.95 THz). In order to design the tuning circuits, we used terahertz time domain spectroscopy to experimentally derive the complex conductivity of relatively thick NbTiN films deposited on quartz substrate directly as a ground plane and on RF-sputtered SiO2as a microstrip. Results showed that the conductivities of both films can be described by a modified Mattis-Bardeen theory. We also investigated the junction heating effects originating from quasi-particle trapping in the Nb electrodes embedded in NbTiN circuits by varying the volume of the electrodes. It was confirmed that current-voltage curves of Nb/AlN/Nb tunnel junctions with thick (~200 nm) counter electrodes contacting NbTiN wirings showed higher gap voltages as well as reduced back-bending than those with thin (~50 nm) electrodes. Making use of these findings, our designed SIS mixers employing Nb/AlN/Nb junctions with a current density of 15 kA/cm2and all-NbTiN tuning circuits may cover the Band 10 with good sensitivity.

IEEE Transactions on Applied Superconductivity•Nov 28, 2016•12 citations

Bandwidth coverage of niobium based superconducting tunnel devices

C. F. J. Lodewijk

The Atacama Large Millimeter/submillimeter Array (ALMA) is an astronomical observatory that is being built on a 5000 m altitude plateau in Chile to perform heterodyne measurements in the frequency range of 30 to 950 GHz. These measurements will reveal the presence of characteristic molecules that tell us more about the evolution of the early universe and the formation of stars and planetary systems. Because of the limited atmospherical transmission of radiation at these frequencies, ALMA is divided into 10 frequency bands with a sufficiently high transmission. This thesis describes the research that has been done to develop superconductor - insulator - superconductor (SIS) tunneljunctions as detectors for Band 9 of ALMA (602 - 720 GHz). To realize these devices, a tuning circuit has been developed that optimizes the coupling of electromagnetic radiation from the antenna to the SIS junction. Further, a new method has been developed to create SIS junctions with aluminum nitride (AlN) as the insulating material. This method uses a remote plasma from an inductively coupled plasma source. Junctions that have been grown with this new method show a much better uniformity in transmissivity of the tunneling barrier at high critical current densities. Using the new method, SIS devices with AlN tunnel barriers have been developed that have a record low noise temperature over the full bandwidth of Band 9.

•Feb 2, 2009•0 citations

A THz SIS Mixer With a NbTiN-Ground Plane and SIS Microtrilayers Directly Grown on a Quartz Substrate

Akira Endo, Takashi Noguchi, M. Kroug +8 more

A new structure and a fabrication process for multi-material THz-SIS mixers are proposed. In this design, both the micrometer-sized SIS trilayers (MTLs: microtrilayers) and the ground plane are deposited directly onto the substrate. This structure is expected to possess a number of unique features, e.g., (1) the quality of the SIS junction is not affected by the physical nature of the ground plane film; (2) the heat can escape directly from the junction into the substrate. The influence of the MTL-structure on the junction quality and circuit characteristics have been investigated. Numerical calculation suggests that the extra rf loss around the junction can be kept small if the offset between the junction and the ground plane is less than 1 mum. MTL-SIS mixers have been fabricated using Nb/Al-AlN(or Al-AlOx)/Nb SIS junctions and NbTiN/Al microstrip lines. The leakage current of the SIS junction can be made as small as that of the best all-Nb devices. The MTL-SIS structure will be useful in the development of future THz SIS mixers. The abstract goes here.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•4 citations

SIS Mixer Fabrication for ALMA Band10

M. Kroug, Akira Endo, T. Tamura +6 more

Band10 of the Atacama Large Millimeter Array (ALMA) is a planned heterodyne receiver covering the frequency range 790 GHz-950 GHz. The waveguide mixers are superconductor insulator superconductor (SIS) Nb/Al-AlOx/Nb junctions integrated with NbTiN/SiO2/Al tuning circuits. Our junction definition process has been greatly simplified by introducing an inductively-coupled-plasma (ICP) etcher to the fabrication. The etching process, which employs a low-pressure CF4/O2plasma, allows to remove the entire Nb/Al-AlOx/Nb tri-layer in asinglestep. SIS mixers with current densities up to 10 kA/cm2and quality factor above 15 have been fabricated with good reproducibility. Minimum receiver noise temperature, corrected for optical losses, is 210 K at 860 GHz. With the goal to further improve the performance, optimization of circuit design and fabrication technology are discussed.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•24 citations
Research and development of THz electronics seeks to comprehend and utilize one of the last uncharted regions of the electromagnetic spectrum. Sandwiched directly between the microwave and far-infrared regions, THz devices often involve a hybrid fusion of optical and small-scaled RF technologies, frequently requiring novel design, materials, and fabrication techniques. Despite the increased complexity, when compared to many well-established RF and optical technologies, THz receivers used in telescope imaging applications are of great importance to radio astronomers, with current large scale multinational radio telescope projects, such as the Atacama Large Millimeter/sub-millimeter Array (ALMA) in Chile designed to observe the universe from 31 to 950 GHz--- the field of radio astronomy will be one of the immediate benefactors from the ongoing research of higher frequency THz detection. Heterodyne receivers, based on the Nb/Al-Al2O3/Nb SIS tunnel junction, have demonstrated sensitivities approaching the quantum limit, making them ideal for high-sensitivity THz detectors. However, as design frequencies approach 1 THz and beyond, both the Nb electrodes and Al2O3 tunnel barrier of the prototypical Nb/Al-Al2O3/Nb SIS junction begin to demonstrate poor performance. A turning point in SIS technology was through the development of ICP grown AlN as an alternative barrier material, first reported by our research group in 2007. However, due to run to run variation, our original ICP configuration made realization of AlN based SIS mixers impossible at the time. In this work, we present the modifications of our trilayer deposition system that allowed our research group to realize AlN based SIS mixers meeting all ALMA Band-8 specifications. Additionally, we report on a novel fabrication process that significantly reduced fabrication time of high-quality SIS test devices. ICP nitridation of Al overlayers is inherently a complex process, and little is reported in the literature as to what affects AlN growth. With this in mind, we report on detailed investigations of ICP nitridation, using ellipsometry and spectroscopic analysis, and provide a better understanding of the processes involved in the realization of high-quality ICP grown AlN based SIS trilayer.
This thesis describes the development and testing of NbN/MgO/NbN tunnel junctions for use as superconductor-insulator-superconductor (SIS) mixers. SIS mixers are the most sensitive heterodyne detectors in the millimeter wavelength region. Most SIS mixers use Pb alloy tunnel junction. These tunnel junctions have several problems associated with the soft nature of Pb and its low superconducting transition temperature. NbN-based tunnel junctions are being developed to overcome these difficulties. These devices are intended to be used as mixers at millimeter and submillimeter wavelengths. This thesis describes the fabrication process involved in making NbN junctions, and the results of measurements on these devices. The purpose of these measurements is to determine the future possibilities of NbN tunnel junctions as high-frequency mixers. The first chapter is an introduction to SIS mixers and explains how tunnel junction properties affect mixer performance. The basic theory of tunneling and mixing in SIS mixers is first presented. A description of quantum mixer theory is included in this presentation. This theory makes several interesting predictions that cannot be explained using classical theories. This is followed by a description of how real SIS tunnel junctions differ from ideal junctions. The physical origin of these differences is discussed, along with how they affect SIS mixer performance. Finally, the advantages and disadvantages of the various superconducting materials available are discussed. The decision to develop NbN devices is based on these material properties. The second chapter describes the methods used to fabricate small-area NbN/MgO/NbN tunnel junctions. The chapter begins with a description of the various methods that have been used to deposit NbN films. Reactive magnetron sputtering is chosen as the best method for tunnel junction fabrication. Details on the vacuum systems and the methods used for depositing superconducting NbN are discussed. Next, the process used for depositing junction trilayers (NbN/MgO/NbN) is described. The probable growth mode of MgO on NbN is presented. The importance of this growth mode to the junction quality is explained in some detail. Next, standard junction processing steps are reported. The details and limitations of each step are put forth. The standard process allows for the fabrication of 1 [square micron] tunnel junctions. Finally, this chapter discusses several methods of fabaricating submicron junctions that are being pursued. The status of this work is given. The third chapter describes the characterization of NbN films and NbN/Mg0/NbN tunnel junctions. Film properties are described first. The correlation of these properties to deposition conditions is discussed in some detail. Next, values for the various features of the I-V characteristic are given; typical and exceptional values are noted. How these features limit mixer results is described in detail. Several important device attributes were measured using superconducting-quantum-interference-devices (SQUIDs). These attributes are the junction's specific capacitance and the film's magnetic penetration depth. The theory and results of measuring specific capacitance and penetration depth are presented. Following the SQUID results is a large section on RP testing. Mixer tests were made at 205 GHz. The receiver design used, integral inductive tuning circuit used and results are discussed. These results are well understood, with the exception of the temperature dependence of the mixer performance. Finally, measurements of the uniformity of many junctions on a single wafer are presented. The importance of junction uniformity is also described. The final chapter discusses the ultimate limits on NbN mixers, and tells what future work must be done to achieve these limits. The primary high-frequency limit on NbN junctions is the capacitance of NbN/MgO/NbN junctions. The limit imposed by the junction capacitance and circuits used to tune out this capacitance are discussed. Also, the low-frequency limits on NbN junctions are discussed. The status of submicron devices is presented. Junction area is the most immediate limitation on NbN mixer results. The possibility of using other barrier materials to increase the RC speed of NbN junctions is presented. Finally, the possibility of operating NbN junctions at temperatures above 4.2 K is discussed.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.
We have designed superconductor-insulator-superconductor (SIS) mixers using Nb/AlN/Nb tunnel junctions integrated with NbTiN/SiO2/NbTiN microstrip tuning circuits for the Atacama Large Millimeter/submillimeter Array (ALMA) Band 10 (0.78-0.95 THz). In order to design the tuning circuits, we used terahertz time domain spectroscopy to experimentally derive the complex conductivity of relatively thick NbTiN films deposited on quartz substrate directly as a ground plane and on RF-sputtered SiO2as a microstrip. Results showed that the conductivities of both films can be described by a modified Mattis-Bardeen theory. We also investigated the junction heating effects originating from quasi-particle trapping in the Nb electrodes embedded in NbTiN circuits by varying the volume of the electrodes. It was confirmed that current-voltage curves of Nb/AlN/Nb tunnel junctions with thick (~200 nm) counter electrodes contacting NbTiN wirings showed higher gap voltages as well as reduced back-bending than those with thin (~50 nm) electrodes. Making use of these findings, our designed SIS mixers employing Nb/AlN/Nb junctions with a current density of 15 kA/cm2and all-NbTiN tuning circuits may cover the Band 10 with good sensitivity.
The Atacama Large Millimeter/submillimeter Array (ALMA) is an astronomical observatory that is being built on a 5000 m altitude plateau in Chile to perform heterodyne measurements in the frequency range of 30 to 950 GHz. These measurements will reveal the presence of characteristic molecules that tell us more about the evolution of the early universe and the formation of stars and planetary systems. Because of the limited atmospherical transmission of radiation at these frequencies, ALMA is divided into 10 frequency bands with a sufficiently high transmission. This thesis describes the research that has been done to develop superconductor - insulator - superconductor (SIS) tunneljunctions as detectors for Band 9 of ALMA (602 - 720 GHz). To realize these devices, a tuning circuit has been developed that optimizes the coupling of electromagnetic radiation from the antenna to the SIS junction. Further, a new method has been developed to create SIS junctions with aluminum nitride (AlN) as the insulating material. This method uses a remote plasma from an inductively coupled plasma source. Junctions that have been grown with this new method show a much better uniformity in transmissivity of the tunneling barrier at high critical current densities. Using the new method, SIS devices with AlN tunnel barriers have been developed that have a record low noise temperature over the full bandwidth of Band 9.
A new structure and a fabrication process for multi-material THz-SIS mixers are proposed. In this design, both the micrometer-sized SIS trilayers (MTLs: microtrilayers) and the ground plane are deposited directly onto the substrate. This structure is expected to possess a number of unique features, e.g., (1) the quality of the SIS junction is not affected by the physical nature of the ground plane film; (2) the heat can escape directly from the junction into the substrate. The influence of the MTL-structure on the junction quality and circuit characteristics have been investigated. Numerical calculation suggests that the extra rf loss around the junction can be kept small if the offset between the junction and the ground plane is less than 1 mum. MTL-SIS mixers have been fabricated using Nb/Al-AlN(or Al-AlOx)/Nb SIS junctions and NbTiN/Al microstrip lines. The leakage current of the SIS junction can be made as small as that of the best all-Nb devices. The MTL-SIS structure will be useful in the development of future THz SIS mixers. The abstract goes here.
Band10 of the Atacama Large Millimeter Array (ALMA) is a planned heterodyne receiver covering the frequency range 790 GHz-950 GHz. The waveguide mixers are superconductor insulator superconductor (SIS) Nb/Al-AlOx/Nb junctions integrated with NbTiN/SiO2/Al tuning circuits. Our junction definition process has been greatly simplified by introducing an inductively-coupled-plasma (ICP) etcher to the fabrication. The etching process, which employs a low-pressure CF4/O2plasma, allows to remove the entire Nb/Al-AlOx/Nb tri-layer in asinglestep. SIS mixers with current densities up to 10 kA/cm2and quality factor above 15 have been fabricated with good reproducibility. Minimum receiver noise temperature, corrected for optical losses, is 210 K at 860 GHz. With the goal to further improve the performance, optimization of circuit design and fabrication technology are discussed.