Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

An Atom Waveguide for Interferometry with a Bose-Einstein Condensate of 87-Rb

J. M. Reeves

Published May 1, 2006• 4 citations
Publisher

Abstract

A Bose-Einstein condensation (BEC) production machine has been assembled and operated, using two vacuum chambers isolated from each other by a thin tube. A magnetooptical trap (MOT) is operated in the first chamber, where atoms are captured out of a thermal vapor and cooled to about 200 µK. The atoms are then transferred to a magnetic trap which is mounted on to a movable stage. A programmable motor moves the stage about half a meter, carrying the atoms to the second vacuum chamber where they are evaporatively cooled in a time-orbiting potential trap. We successfully used this apparatus to observe the first BEC's at the University of Virginia. We have also implemented a novel atom trap for BEC's of 87 Rb to be used in atom interferometry experiments. The trap is based on a time-orbiting potential waveguide. It supports the atoms against gravity while providing weak confinement to minimize interaction effects. We have loaded a condensate into the waveguide, and removed all other confinement fields. Up to 2 ×10 4 condensate atoms have been loaded into the trap, at estimated temperatures as low as 850 pK. We expect this novel type of trap will be useful for a variety of applications in condensate interferometry. Finally, we have characterized our trap by perturbing the atomic cloud with a sudden change in the confinement field. We subsequently obtain harmonic oscillation frequencies vi (ω x ,ω y ,ω z ) as low as 2π×(6.0, 1.2, 3.3) Hz. We have developed a mathematical description of the waveguide fields to account for the residual fields from the trap leads, obtaining good agreement between the measured and predicted trap behavior. The weak confinement of our guide should greatly reduce the limiting effects of atomic interactions. We anticipate that interferometer measurement times of 1 s or more should be achievable in this device. With suitable modifications, our waveguide could be used to precisely measure electric polarizability, gravitational forces, rotations, and other phenomena. We expect that the trap design presented here will play an essential role in allowing condensate interferometry to realize its potential. Note: Abstract extracted from PDF text

DOI
10.18130/v3r004

Related papers

Time-orbiting potential trap for Bose-Einstein condensate interferometry

J. M. Reeves, Óscar Viyuela García, Benjamin Deissler +3 more

We describe an atom trap for Bose-Einstein condensates of $^{87}\mathrm{Rb}$ to be used in atom interferometry experiments. The trap is based on a time-orbiting potential waveguide. It supports the atoms against gravity while providing weak confinement to minimize interaction effects. We observe harmonic oscillation frequencies $({\ensuremath{\omega}}_{x},{\ensuremath{\omega}}_{y},{\ensuremath{\omega}}_{z})$ as low as $2\ensuremath{\pi}\ifmmode\times\else\texttimes\fi{}(6.0,1.2,3.3)\phantom{\rule{0.3em}{0ex}}\mathrm{Hz}$. Up to $2\ifmmode\times\else\texttimes\fi{}{10}^{4}$ condensate atoms have been loaded into the trap, at estimated temperatures as low as $850\phantom{\rule{0.3em}{0ex}}\mathrm{pK}$. We anticipate that interferometer measurement times of $1\phantom{\rule{0.3em}{0ex}}\mathrm{s}$ or more should be achievable in this device.

arXiv:cond-mat/0509691•Physical Review A•Nov 22, 2005•22 citations

A Cylindrically Symmetric, Magnetic Trap for Bose-Einstein Condensate Atom Interferometry Applications

R. A. Horne

This dissertation documents a second Bose-Einstein Condensate production apparatus at the University of Virginia. The apparatus produces condensates of 87 Rb atoms to be used as the wave source for atom interferometry experiments. Additionally, a new magnetic trap was developed which provides a harmonic potential with cylindrical symmetry and also supports the atoms against gravity. This trap is based on a time-orbiting potential. To characterize the trapping potential, a condensate was loaded into the trap and perturbed by suddenly changing the confinement field during loading. This had the effect of inducing harmonic oscillations which were measured at varying trap parameters. We expect that this trap will be useful for the implementation of a compact atom interferometer-based gyroscope. Finally, an asymmetric Bragg splitting pulse was developed which allowed for the implementation of two simple interferometers. These interferometers developed a phase which depended on the recoil frequency of 87 Rb and served as a proof of principle for this new apparatus.

•Jul 17, 2015•3 citations

Realization of Bose-Einstein Condensation of 87Rb in a Time-orbiting Potential Trap

M. Siercke

The construction of an apparatus capable of producing Bose-Einstein condensates marks a significant milestone in every experimental cold atom laboratory. In this thesis I describe the development of a system to create a Bose-Einstein condensate of $^{87}Rb$ in a Time-Orbiting Potential trap.\n\nI review the optical and magnetic techniques required to trap and cool an atomic sample under vacuum, motivating our decision to build a double MOT system comprised of a high-pressure ($10^{-9}$ torr) chamber to gather atoms and a low-pressure ($10^{-11}$ torr) chamber to cool atoms to degeneracy.\n\nBy theoretically modeling the atom number and temperature inside the magnetic trap during evaporative cooling I demonstrate a simple approach to determining a cooling path that reaches the transition temperature. By making use of the condensates produced under these non-optimized conditions I determine the heating rate of the condensate in the TOP trap to be $300$ nK/s. I further use the condensates to make a more precise measurement of the TOP trap bias field.\n\nI improve upon the conventional evaporation path used in TOP trap experiments by introducing and optimizing additional bias field compression stages in between RF evaporation ramps. I demonstrate how, by adding these additional stages, the system is capable of reaching the BEC phase transition with a final atom number of $2\\times 10^{5}$. In contrast, RF evaporation after only a single bias field ramp has yielded condensates with only $30\\times 10^3$ atoms.

•Jun 13, 2011•1 citation

Investigating the dynamics of a Bose Einstein condensate on an atom chip

I J M Barr

In this thesis I discuss work that has been carried out on the dynamics of a Bose Einstein condensate of Rb 87 produced near an atom chip. A Bose Einstein Condensate (BEC) is a quantum state of matter where a single quantum state becomes occupied by a macroscopic number of identical Bosons. In our case this is achieved by cooling a system of trapped identical rubidium 87 atoms to its ground state. To reach temperatures of condensation we initially laser cool atoms from room temperature, before loading them into a magnetic trap. The magnetic trap is produced through a combination of uniform magnetic fields from coils outside our vacuum chamber and currents running through wires on an atom chip. The atom chip is a microfabricated device, produced by a coating a silicon chip with a thin layer of gold and etching wires into it. Together, these fields create a magnetic field minimum 120μm from the surface of the chip which can be used to confine low field seeking hyperfine states of the atom in an elongated harmonic trap. Once the atoms are confined in the magnetic trap we used force evaporative cooling out to reach the phase space densities required for Bose Einstein condensation. The BEC is used to investigate the relative dynamics between the fraction of the atoms in the condensate to those not in the condensate. Our atom chip provided a suitable environment to investigate this due to fragmentation of the magnetic potential close to the chip. Small imperfections in the wires on our atom chip mean that the trapping potential isn’t smooth. Small regions of higher trapping frequency - or fragments - are formed. Due to the small size of these fragments it is possible to find a position where a condensate can form in the fragment, and see a potential of high frequency, whereas a non-condensed atom will see a lower frequency potential. We exploit this to set the condensed fraction moving relative to the non condensed part and investigate the subsequent damping of their motion relative to each other.

•May 1, 2015•3 citations

Quantum sensing using trapped atom interferometry

Marybeth Beydler, Eddie Moan, Cass A. Sackett

We report on the design and implementation of a compact apparatus for the production of Bose-Einstein condensation and the investigation of atom interferometry in a time-orbiting potential trap. The apparatus fits in a volume of about 30 L, and includes a vacuum chamber, magnetic trapping coils, beam delivery optics, and an imaging camera. It supports testing of in-air atom chips through a silicon membrane that serves as a thin vacuum wall and a mirror for a magneto-optical trap. The apparatus could reliably trap atoms near the membrane, but the number of atoms was limited and too low to support evaporative cooling. In future work, the cell will be loaded with optical tweezers from a separate cold-atom source.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•1 citation

Guided-wave atom interferometers with Bose-Einstein condensate

Ebubechukwu O. Ilo-Okeke

An atom interferometer is a sensitive device that has potential for many useful applications. Atoms are sensitive to electromagnetic fields due to their electric and magnetic moments and their mass allows them to be deflected in a gravitational field, thereby making them attractive for measuring inertial forces. The narrow momentum distribution of Bose-Einstein condensate (BEC) is a great asset in realizing portable atom interferometers. An example is a guided-wave atom interferometer that uses a confining potential to guide the motion of the condensate. Despite the promise of guided-wave atom interferometry with BEC, spatial phase and phase diffusion limit the contrast of the interference fringes. The control of these phases is required for successful development of a BEC-based guided-wave atom interferometer. This thesis analyses the guided-wave atom interferometer, where an atomic BEC cloud at the center of a confining potential is split into two clouds that move along different arms of the interferometer. The clouds accumulate relative phase due to the environment, spatially inhomogeneous trapping potential and atom-atom interactions within the condensate. At the end of the interferometric cycle, the clouds are recombined producing a cloud at rest and moving clouds. The number of atoms in the clouds that emerge depends on the relative phase accumulated by the clouds during propagation. This is investigated by deriving an expression for the probability of finding any given number of atoms in the clouds that emerge after recombination. Characteristic features like mean, standard deviation and cross-correlation function of the probability density distribution are calculated and the contrast of the interference fringes is optimized. This thesis found that optimum contrast is achieved through the control of total population of atoms in the condensate, trap frequencies, s-wave scattering length, and the duration of the interferometric cycle.

•Apr 24, 2012•0 citations
A Bose-Einstein condensation (BEC) production machine has been assembled and operated, using two vacuum chambers isolated from each other by a thin tube. A magnetooptical trap (MOT) is operated in the first chamber, where atoms are captured out of a thermal vapor and cooled to about 200 µK. The atoms are then transferred to a magnetic trap which is mounted on to a movable stage. A programmable motor moves the stage about half a meter, carrying the atoms to the second vacuum chamber where they are evaporatively cooled in a time-orbiting potential trap. We successfully used this apparatus to observe the first BEC's at the University of Virginia. We have also implemented a novel atom trap for BEC's of 87 Rb to be used in atom interferometry experiments. The trap is based on a time-orbiting potential waveguide. It supports the atoms against gravity while providing weak confinement to minimize interaction effects. We have loaded a condensate into the waveguide, and removed all other confinement fields. Up to 2 ×10 4 condensate atoms have been loaded into the trap, at estimated temperatures as low as 850 pK. We expect this novel type of trap will be useful for a variety of applications in condensate interferometry. Finally, we have characterized our trap by perturbing the atomic cloud with a sudden change in the confinement field. We subsequently obtain harmonic oscillation frequencies vi (ω x ,ω y ,ω z ) as low as 2π×(6.0, 1.2, 3.3) Hz. We have developed a mathematical description of the waveguide fields to account for the residual fields from the trap leads, obtaining good agreement between the measured and predicted trap behavior. The weak confinement of our guide should greatly reduce the limiting effects of atomic interactions. We anticipate that interferometer measurement times of 1 s or more should be achievable in this device. With suitable modifications, our waveguide could be used to precisely measure electric polarizability, gravitational forces, rotations, and other phenomena. We expect that the trap design presented here will play an essential role in allowing condensate interferometry to realize its potential. Note: Abstract extracted from PDF text
We describe an atom trap for Bose-Einstein condensates of 87Rb^{87}\mathrm{Rb}87Rb to be used in atom interferometry experiments. The trap is based on a time-orbiting potential waveguide. It supports the atoms against gravity while providing weak confinement to minimize interaction effects. We observe harmonic oscillation frequencies $({\ensuremath{\omega}}_{x},{\ensuremath{\omega}}_{y},{\ensuremath{\omega}}_{z})$ as low as $2\ensuremath{\pi}\ifmmode\times\else\texttimes\fi{}(6.0,1.2,3.3)\phantom{\rule{0.3em}{0ex}}\mathrm{Hz}$. Up to $2\ifmmode\times\else\texttimes\fi{}{10}^{4}$ condensate atoms have been loaded into the trap, at estimated temperatures as low as 850pK850\phantom{\rule{0.3em}{0ex}}\mathrm{pK}850pK. We anticipate that interferometer measurement times of 1s1\phantom{\rule{0.3em}{0ex}}\mathrm{s}1s or more should be achievable in this device.
This dissertation documents a second Bose-Einstein Condensate production apparatus at the University of Virginia. The apparatus produces condensates of 87 Rb atoms to be used as the wave source for atom interferometry experiments. Additionally, a new magnetic trap was developed which provides a harmonic potential with cylindrical symmetry and also supports the atoms against gravity. This trap is based on a time-orbiting potential. To characterize the trapping potential, a condensate was loaded into the trap and perturbed by suddenly changing the confinement field during loading. This had the effect of inducing harmonic oscillations which were measured at varying trap parameters. We expect that this trap will be useful for the implementation of a compact atom interferometer-based gyroscope. Finally, an asymmetric Bragg splitting pulse was developed which allowed for the implementation of two simple interferometers. These interferometers developed a phase which depended on the recoil frequency of 87 Rb and served as a proof of principle for this new apparatus.
The construction of an apparatus capable of producing Bose-Einstein condensates marks a significant milestone in every experimental cold atom laboratory. In this thesis I describe the development of a system to create a Bose-Einstein condensate of 87Rb^{87}Rb87Rb in a Time-Orbiting Potential trap.\n\nI review the optical and magnetic techniques required to trap and cool an atomic sample under vacuum, motivating our decision to build a double MOT system comprised of a high-pressure (10−910^{-9}10−9 torr) chamber to gather atoms and a low-pressure (10−1110^{-11}10−11 torr) chamber to cool atoms to degeneracy.\n\nBy theoretically modeling the atom number and temperature inside the magnetic trap during evaporative cooling I demonstrate a simple approach to determining a cooling path that reaches the transition temperature. By making use of the condensates produced under these non-optimized conditions I determine the heating rate of the condensate in the TOP trap to be 300300300 nK/s. I further use the condensates to make a more precise measurement of the TOP trap bias field.\n\nI improve upon the conventional evaporation path used in TOP trap experiments by introducing and optimizing additional bias field compression stages in between RF evaporation ramps. I demonstrate how, by adding these additional stages, the system is capable of reaching the BEC phase transition with a final atom number of 2times1052\\times 10^{5}2times105. In contrast, RF evaporation after only a single bias field ramp has yielded condensates with only 30times10330\\times 10^330times103 atoms.
In this thesis I discuss work that has been carried out on the dynamics of a Bose Einstein condensate of Rb 87 produced near an atom chip. A Bose Einstein Condensate (BEC) is a quantum state of matter where a single quantum state becomes occupied by a macroscopic number of identical Bosons. In our case this is achieved by cooling a system of trapped identical rubidium 87 atoms to its ground state. To reach temperatures of condensation we initially laser cool atoms from room temperature, before loading them into a magnetic trap. The magnetic trap is produced through a combination of uniform magnetic fields from coils outside our vacuum chamber and currents running through wires on an atom chip. The atom chip is a microfabricated device, produced by a coating a silicon chip with a thin layer of gold and etching wires into it. Together, these fields create a magnetic field minimum 120μm from the surface of the chip which can be used to confine low field seeking hyperfine states of the atom in an elongated harmonic trap. Once the atoms are confined in the magnetic trap we used force evaporative cooling out to reach the phase space densities required for Bose Einstein condensation. The BEC is used to investigate the relative dynamics between the fraction of the atoms in the condensate to those not in the condensate. Our atom chip provided a suitable environment to investigate this due to fragmentation of the magnetic potential close to the chip. Small imperfections in the wires on our atom chip mean that the trapping potential isn’t smooth. Small regions of higher trapping frequency - or fragments - are formed. Due to the small size of these fragments it is possible to find a position where a condensate can form in the fragment, and see a potential of high frequency, whereas a non-condensed atom will see a lower frequency potential. We exploit this to set the condensed fraction moving relative to the non condensed part and investigate the subsequent damping of their motion relative to each other.
We report on the design and implementation of a compact apparatus for the production of Bose-Einstein condensation and the investigation of atom interferometry in a time-orbiting potential trap. The apparatus fits in a volume of about 30 L, and includes a vacuum chamber, magnetic trapping coils, beam delivery optics, and an imaging camera. It supports testing of in-air atom chips through a silicon membrane that serves as a thin vacuum wall and a mirror for a magneto-optical trap. The apparatus could reliably trap atoms near the membrane, but the number of atoms was limited and too low to support evaporative cooling. In future work, the cell will be loaded with optical tweezers from a separate cold-atom source.
An atom interferometer is a sensitive device that has potential for many useful applications. Atoms are sensitive to electromagnetic fields due to their electric and magnetic moments and their mass allows them to be deflected in a gravitational field, thereby making them attractive for measuring inertial forces. The narrow momentum distribution of Bose-Einstein condensate (BEC) is a great asset in realizing portable atom interferometers. An example is a guided-wave atom interferometer that uses a confining potential to guide the motion of the condensate. Despite the promise of guided-wave atom interferometry with BEC, spatial phase and phase diffusion limit the contrast of the interference fringes. The control of these phases is required for successful development of a BEC-based guided-wave atom interferometer. This thesis analyses the guided-wave atom interferometer, where an atomic BEC cloud at the center of a confining potential is split into two clouds that move along different arms of the interferometer. The clouds accumulate relative phase due to the environment, spatially inhomogeneous trapping potential and atom-atom interactions within the condensate. At the end of the interferometric cycle, the clouds are recombined producing a cloud at rest and moving clouds. The number of atoms in the clouds that emerge depends on the relative phase accumulated by the clouds during propagation. This is investigated by deriving an expression for the probability of finding any given number of atoms in the clouds that emerge after recombination. Characteristic features like mean, standard deviation and cross-correlation function of the probability density distribution are calculated and the contrast of the interference fringes is optimized. This thesis found that optimum contrast is achieved through the control of total population of atoms in the condensate, trap frequencies, s-wave scattering length, and the duration of the interferometric cycle.