Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SPIE eBooks

Lasing in Random Media

Hui W. Cao

Published Mar 16, 2010• 4 citations
Publisher

Abstract

A photon, unlike an electron, can stimulate an excited atom to emit a second photon into the same electromagnetic mode. This stimulated emission process is the foundation for light amplification and oscillation (i.e., self-generation). Initially, the term LASER referred to Light Amplification by Stimulated Emission of Radiation. Nowadays laser often means Light Oscillation by Stimulated Emission, which should literally be called "€œLOSER"€ instead of "€œLASER." To distinguish the above two devices, the former is called a laser amplifier, the latter a laser oscillator (Siegman 1986). Laser oscillation occurs when the photon generation rate exceeds the photon loss rate in a system. If gain saturation were absent, the photon number in a laser oscillator would diverge in time. In other words, the rate equation for the photon number would acquire an unstable solution above the oscillation threshold. In reality, gain saturation reduces the photon generation rate to the photon loss rate so that the number of photons in the oscillator remains at a finite value.

DOI
10.1117/3.832717.ch11

Related papers

Size-Dependent Spontaneous Energy Loss in Lasers due to Self-Stimulated Emission

Tom Waite

Laser amplifiers when pumped to a significant degree of population inversion undergo decay via (1) natural spontaneous emission of radiation from individual excited atoms, and (2) a size-dependent decay due to self-amplification of the spontaneously emitted radiation which passes through a large fraction of the amplifier length before escaping. This latter effect has a definite size threshold near which the decay rate changes several orders of magnitude. The decay rate is roughly independent of size except near the threshold.

Journal of Applied Physics•Jun 1, 1964•14 citations

Masers and lasers

P.V. Landshoff, Allen Metherell, Gareth Rees

When a system changes its energy as the result of the emission or the absorption of a photon, it is said to undergo radiative transition. There are three kinds of radiative transition. In the presence of an electromagnetic field the system can absorb a photon, so that its energy is raised to a higher level. If the system is initially in a state other than the ground state, it can emit a photon and so shed energy. This can happen without the presence of any external electromagnetic field, in which case a spontaneous emission is said to occur. On the other hand, if the excited system is placed in an electromagnetic field that varies in time with the appropriate frequency, the probability that it will emit a photon can be greatly enhanced. In this case the emission process is known as stimulated emission. Stimulated emission is the basis of maser and laser action, which we describe in this chapter.

Cambridge University Press eBooks•Dec 4, 1997•0 citations

Laser Amplifiers

Bahaa E. A. Saleh, Malvin Carl Teich

A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.

Wiley eBooks•Aug 14, 1991•2 citations

Lasers without inversion: one-photon stimulated emission in a three-level atom

Constantine Mavroyannis

I consider light amplification arising from the competition between absorption and stimulated emission of an excitation, which is induced by a laser field at low intensities interacting with a three-level atom. The lifetime of the induced excitation is 105–106 times longer than those of spontaneously emitted excitations. Conditions are established under which the stimulated emission prevails over the induced absorption, and the net negative intensity is 102–103 times greater than those of spontaneously emitted excitations, indicating that significant amplification occurs near the frequency of the laser field. PACS numbers: 32.80-t, 42.50.-p, 42.50H2

Journal of the Optical Society of America B•Dec 1, 1993•3 citations

A fresh look at continuous-wave lasers: How they really work!

Markus Pollnau

This lecture describes the operation principle of a continuous-wave (cw) laser. In order to keep the photon rate equation and its solution simple, usually the spontaneous-emission rate is neglected with the argument that it is so much smaller than the stimulated-emission rate. The direct consequence is that in a cw laser the gain would equal the losses. Yet, additional implications are that the light emitted by such a laser would be a pure sine wave with an infinite coherence length, its linewidth would become a delta function, its Q-factor would assume an infinite value, the coherent photon number would build up and coherence would manifest itself inside the resonator only when pumping above the laser threshold, and the threshold inversion would depend only on the total resonator losses. None of these implications holds true for any laser that mankind has ever created. Starting from vacuum fluctuations, we consider spontaneous emission directly in the photon rate equation, thereby a priori avoiding all these inconsistencies. It is then straight-forward to see that in a cw laser the gain is smaller than the losses, a cw laser does not only have a finite linewidth that can be derived in a very simple manner, but also a finite Q-factor, as well as two laser thresholds which are both different from the commonly assumed “threshold inversion‿. This work was performed in collaboration with Dr. Marc Eichhorn from the French-German Research Institute of St. Louis, France.

•Oct 1, 2013•0 citations

Buildup of Oscillations and Photon Statistics of Laser Light

Surendra Singh

In this chapter, laser rate equations were used to derive another set of simpler rate equations that couple cavity photon number and the population of excited active atoms as the dynamical variables describing the laser. These equations were used to explore the buildup of laser oscillations from noise in a laser cavity and the remarkable growth of cavity photon number as the laser crosses threshold of oscillation. These modified rate equations were used to derive a Master equation for the cavity photon number probabilities. The steady-state solution of this equation was used to discuss equally remarkable transformation of photon statistics of laser light near threshold. The effect of spontaneous emission on setting the ultimate limit on laser linewidth was also discussed.

CRC Press eBooks•Sep 23, 2026•0 citations
A photon, unlike an electron, can stimulate an excited atom to emit a second photon into the same electromagnetic mode. This stimulated emission process is the foundation for light amplification and oscillation (i.e., self-generation). Initially, the term LASER referred to Light Amplification by Stimulated Emission of Radiation. Nowadays laser often means Light Oscillation by Stimulated Emission, which should literally be called "€œLOSER"€ instead of "€œLASER." To distinguish the above two devices, the former is called a laser amplifier, the latter a laser oscillator (Siegman 1986). Laser oscillation occurs when the photon generation rate exceeds the photon loss rate in a system. If gain saturation were absent, the photon number in a laser oscillator would diverge in time. In other words, the rate equation for the photon number would acquire an unstable solution above the oscillation threshold. In reality, gain saturation reduces the photon generation rate to the photon loss rate so that the number of photons in the oscillator remains at a finite value.
Laser amplifiers when pumped to a significant degree of population inversion undergo decay via (1) natural spontaneous emission of radiation from individual excited atoms, and (2) a size-dependent decay due to self-amplification of the spontaneously emitted radiation which passes through a large fraction of the amplifier length before escaping. This latter effect has a definite size threshold near which the decay rate changes several orders of magnitude. The decay rate is roughly independent of size except near the threshold.
When a system changes its energy as the result of the emission or the absorption of a photon, it is said to undergo radiative transition. There are three kinds of radiative transition. In the presence of an electromagnetic field the system can absorb a photon, so that its energy is raised to a higher level. If the system is initially in a state other than the ground state, it can emit a photon and so shed energy. This can happen without the presence of any external electromagnetic field, in which case a spontaneous emission is said to occur. On the other hand, if the excited system is placed in an electromagnetic field that varies in time with the appropriate frequency, the probability that it will emit a photon can be greatly enhanced. In this case the emission process is known as stimulated emission. Stimulated emission is the basis of maser and laser action, which we describe in this chapter.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
I consider light amplification arising from the competition between absorption and stimulated emission of an excitation, which is induced by a laser field at low intensities interacting with a three-level atom. The lifetime of the induced excitation is 105–106 times longer than those of spontaneously emitted excitations. Conditions are established under which the stimulated emission prevails over the induced absorption, and the net negative intensity is 102–103 times greater than those of spontaneously emitted excitations, indicating that significant amplification occurs near the frequency of the laser field. PACS numbers: 32.80-t, 42.50.-p, 42.50H2
This lecture describes the operation principle of a continuous-wave (cw) laser. In order to keep the photon rate equation and its solution simple, usually the spontaneous-emission rate is neglected with the argument that it is so much smaller than the stimulated-emission rate. The direct consequence is that in a cw laser the gain would equal the losses. Yet, additional implications are that the light emitted by such a laser would be a pure sine wave with an infinite coherence length, its linewidth would become a delta function, its Q-factor would assume an infinite value, the coherent photon number would build up and coherence would manifest itself inside the resonator only when pumping above the laser threshold, and the threshold inversion would depend only on the total resonator losses. None of these implications holds true for any laser that mankind has ever created. Starting from vacuum fluctuations, we consider spontaneous emission directly in the photon rate equation, thereby a priori avoiding all these inconsistencies. It is then straight-forward to see that in a cw laser the gain is smaller than the losses, a cw laser does not only have a finite linewidth that can be derived in a very simple manner, but also a finite Q-factor, as well as two laser thresholds which are both different from the commonly assumed “threshold inversion‿. This work was performed in collaboration with Dr. Marc Eichhorn from the French-German Research Institute of St. Louis, France.
In this chapter, laser rate equations were used to derive another set of simpler rate equations that couple cavity photon number and the population of excited active atoms as the dynamical variables describing the laser. These equations were used to explore the buildup of laser oscillations from noise in a laser cavity and the remarkable growth of cavity photon number as the laser crosses threshold of oscillation. These modified rate equations were used to derive a Master equation for the cavity photon number probabilities. The steady-state solution of this equation was used to discuss equally remarkable transformation of photon statistics of laser light near threshold. The effect of spontaneous emission on setting the ultimate limit on laser linewidth was also discussed.