Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

WORLD SCIENTIFIC eBooks

Inexpensive laser cooling and trapping experiment for undergraduate laboratories

Carl Wieman, Gwenn Flowers, Sarah L. Gilbert

Published Jan 1, 2008• 9 citations
Publisher

Abstract

We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×10 7 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix.

DOI
10.1142/9789812813787_0092

Related papers

Inexpensive laser cooling and trapping experiment for undergraduate laboratories

Carl Wieman, Gwenn Flowers, Sarah L. Gilbert

We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×10 7 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix. © 1995 American Association of Physics Teachers.

WORLD SCIENTIFIC eBooks•Jan 1, 2008•1 citation

Inexpensive laser cooling and trapping experiment for undergraduate laboratories

Carl Wieman, Gwenn Flowers, Sarah L. Gilbert

We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×107 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix.

American Journal of Physics•Apr 1, 1995•114 citations

A simple laser cooling and trapping apparatus for undergraduate laboratories

Angela S. Mellish, A. C. Wilson

We present detailed instructions for the construction of a pyramidal-style laser cooling and trapping apparatus. This scheme requires only a single beam, rather than the three pairs of orthogonal beams of the standard magneto-optical trap, which greatly simplifies the geometry and substantially reduces the cost. The trap is based largely on low-cost commercially available items and is simple to construct. It is remarkably insensitive to alignment and reliable to operate. Using a single laser beam with an intensity of 1.3 mW/cm2 we cool and trap more than 4 million rubidium atoms.

American Journal of Physics•Aug 13, 2002•17 citations

Laser cooling of rubidium atoms in a vapor cell

H. Ludvigsen, A. Äijälä, A. Pietiläinen +2 more

We have constructed a simplified setup for the demonstration of laser cooling and trapping of rubidium atoms. An external-cavity diode laser was swept across the F = 3 → F' = 2, 3, 4 resonances of the D 2 -line of 85 Rb at 780 nm to resolve the saturated absorption features. Subsequently, the transition F = 3 → F' = 4 was used to cool rubidium atoms in a roomtemperature vapor cell. A cold cloud of trapped atoms with a diameter of approximately 1 mm was produced. The lifetime of the trap was measured to be 1 second.

Physica Scripta•Apr 1, 1994•8 citations

Design and construction of a pyramidal Magneto-Optical Trap for laser cooling of rubidium atoms

Stefan Mangnusson

In this Master's thesis a pyramidal Magneto-Optical trap (MOT) for rubidium has been designed and constructed.This will be used in the Atomic physics cources for undergraduate students at Lund Technical University.The theory for Laser Cooling and Trapping is covered.A detailed instruction of how to design and build a low-cost MOT is presented.All necessary components are now in the picosecond laboratory of Lund High Power Laser Facility.This report is a continuation of another Master's thesis, Lund Reports on Atomic Physics (LRAP) 325. 1 8. Chu, C. Cohen-Tannoudji and W.D. Phillips [22].

Lund reports on atomic physics•Jan 1, 2005•1 citation

Design study of a Magneto-Optical Trap for laser cooling of rubidium atoms.

E. Gustafsson

In this Master's thesis a Pyramidal Magneto-Optical Trap for rubidium has been designed.The trap is intended to be used in Atomic Physics courses for demonstration and laboratory exercises.The theory for cooling and trapping 85 Rb and 87 Rb is developed.A detailed design of a low-cost and robust MOT is presented.Two frequency locked laser systems have been built.Most of the components necessary to build the MOT have been identified, borrowed or purchased.The mechanical support to hold a pyramidal mirror has also been realized.The report discusses how to complete the construction of the MOT.

Lund reports on atomic physics•Jan 1, 2004•2 citations
We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×10 7 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix.
We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×10 7 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix. © 1995 American Association of Physics Teachers.
We present detailed instructions for the construction and operation of an inexpensive apparatus for laser cooling and trapping of rubidium atoms. This apparatus allows one to use the light from low power diode lasers to produce a magneto-optical trap in a low pressure vapor cell. We present a design which has reduced the cost to less than $3000 and does not require any machining or glassblowing skills in the construction. It has the additional virtues that the alignment of the trapping laser beams is very easy, and the rubidium pressure is conveniently and rapidly controlled. These features make the trap simple and reliable to operate, and the trapped atoms can be easily seen and studied. With a few milliwatts of laser power we are able to trap 4×107 atoms for 3.5 s in this apparatus. A step-by-step procedure is given for construction of the cell, setup of the optical system, and operation of the trap. A list of parts with prices and vendors is given in the Appendix.
We present detailed instructions for the construction of a pyramidal-style laser cooling and trapping apparatus. This scheme requires only a single beam, rather than the three pairs of orthogonal beams of the standard magneto-optical trap, which greatly simplifies the geometry and substantially reduces the cost. The trap is based largely on low-cost commercially available items and is simple to construct. It is remarkably insensitive to alignment and reliable to operate. Using a single laser beam with an intensity of 1.3 mW/cm2 we cool and trap more than 4 million rubidium atoms.
We have constructed a simplified setup for the demonstration of laser cooling and trapping of rubidium atoms. An external-cavity diode laser was swept across the F = 3 → F' = 2, 3, 4 resonances of the D 2 -line of 85 Rb at 780 nm to resolve the saturated absorption features. Subsequently, the transition F = 3 → F' = 4 was used to cool rubidium atoms in a roomtemperature vapor cell. A cold cloud of trapped atoms with a diameter of approximately 1 mm was produced. The lifetime of the trap was measured to be 1 second.
In this Master's thesis a pyramidal Magneto-Optical trap (MOT) for rubidium has been designed and constructed.This will be used in the Atomic physics cources for undergraduate students at Lund Technical University.The theory for Laser Cooling and Trapping is covered.A detailed instruction of how to design and build a low-cost MOT is presented.All necessary components are now in the picosecond laboratory of Lund High Power Laser Facility.This report is a continuation of another Master's thesis, Lund Reports on Atomic Physics (LRAP) 325. 1 8. Chu, C. Cohen-Tannoudji and W.D. Phillips [22].
In this Master's thesis a Pyramidal Magneto-Optical Trap for rubidium has been designed.The trap is intended to be used in Atomic Physics courses for demonstration and laboratory exercises.The theory for cooling and trapping 85 Rb and 87 Rb is developed.A detailed design of a low-cost and robust MOT is presented.Two frequency locked laser systems have been built.Most of the components necessary to build the MOT have been identified, borrowed or purchased.The mechanical support to hold a pyramidal mirror has also been realized.The report discusses how to complete the construction of the MOT.