This chapter explains why Hamilton's principal function plays such an important role in the quantum propagator. It motivates the reader by touching on the fundamental aspects, as well as by describing some of the exciting experiments in the field. The chapter describes the classical motion of the electron in the magnetic field, displaying its ergodic character on what is called a 'Poincaré surface of section' of the phase-space. It discusses three recent experiments involving the transport properties of electrons in high-mobility semiconductor microstructures that show the imprint of chaotic orbits in conductance measurements. The connection of the old quantum theory to quantum mechanics is limited to the role of the periodic orbits in the quantization condition. In post-Bohr quantum mechanics, formulated by the matrix mechanics of Heisenberg and the wave equation of Schrödinger, the connection to classical periodic orbits is not at all apparent.
This chapter explains why Hamilton's principal function plays such an important role in the quantum propagator. It motivates the reader by touching on the fundamental aspects, as well as by describing some of the exciting experiments in the field. The chapter describes the classical motion of the electron in the magnetic field, displaying its ergodic character on what is called a 'Poincaré surface of section' of the phase-space. It discusses three recent experiments involving the transport properties of electrons in high-mobility semiconductor microstructures that show the imprint of chaotic orbits in conductance measurements. The connection of the old quantum theory to quantum mechanics is limited to the role of the periodic orbits in the quantization condition. In post-Bohr quantum mechanics, formulated by the matrix mechanics of Heisenberg and the wave equation of Schrödinger, the connection to classical periodic orbits is not at all apparent.
This chapter discusses in some detail the connection between the classical and quantum mechanical equations of motion, largely using examples that are solvable. It recounts how the old quantum theory was formulated by quantizing the action. Choosing irreducible cycles around the tori leads naturally to defining the action and angle variables of motion, and the quantization of action around each cycle. The chapter shows that families of these periodic orbits contribute to the oscillating part of the density of states of an integrable system in the form of a trace formula. It discusses the transition from integrability to chaos in such systems when perturbations are added that couple resonantly to these natural frequencies. The chapter elaborates with a view to develop the semiclassical approximation, and the associated quantization condition. It brings out the similarity between the Schrodinger equation of wave mechanics, and the HJ equation.
Chapter 3 provides a brief review of a few concepts from classical Newtonian physics, and how this fails to explain phenomena at the nanoscopic scale. As is detailed within, the classical mechanical model is able to describe all observed physical phenomena; however, when it comes to the nanoscale this model breaks down, because the properties of the materials change dramatically. At this scale, the surface-to-volume ratio increases, gravitational forces become negligible and random molecular motion becomes more important. This changes the properties of the material and affects the devices that are fabricated at this scale. It is hence necessary to develop a new model that can explain such physical phenomena. This has led to a new branch of physics, i.e. quantum physics (QP) or quantum mechanics, which is able to explain the behavior observed at nanoscale. QP enables us to explain phenomena such as the photoelectric effect, Compton effect. etc. In this chapter, we introduce quantum mechanics and how it evolved in the late 19th and early 20th centuries. Further, light’s behaviour as a particle as well as a wave is described by the photoelectric effect and Young’s double-slit experiment, respectively. Further, the dual nature of the particle is explained using the de Broglie principle. Schrodinger’s equation is then explained, which gives the probability of finding a subatomic-scale particle at a certain position in a quantum well. In addition to the formulation of Schrodinger’s equation, its solution, the concept of a potential well, the characteristics of the wave function and its interpretation and significance, and, finally, the application of Schrodinger’s equation in the structure of an atom form subsequent parts of this chapter. The equation serves as a basis with which to understand band theory. Band theory explains the difference between conductors, insulators and semiconductors. Materials are distinguished according to the differences in their band gaps. Adding impurities or varying temperature changes the band gap in semiconductors, which consequently changes the properties of the semiconductor and its electrical conduction. One more important measure to understand and exploit the properties and behaviour of materials is Fermi–Dirac statistics. It is useful to acquire the probability of electrons at a given energy level at a specific temperature. These concepts can be utilised by physicists and chip makers to make more energy-efficient devices. Hence, this chapter details the fundamentals of quantum physics and how they relate to the electrical properties of nanodevices.
Quantum theory has formed a cornerstone for modern physics, engineering, and chemistry since the 1920s. It has found significant modern applications in engineering since the development of the semiconductor diode, transistor, and especially the laser in the 1960s. Not until the 1980s did the fabrication and materials growth technology become sufficiently developed to provide the ability to (1) produce quantum well devices (such as quantum well lasers) and (2) engineer the optical and electrical properties of materials (band-gap engineering). One purpose of this chapter is to summarize a small portion of modern quantum theory. The first few sections of this chapter summarize Lagrange and Hamilton’s approach to classical mechanics. These alternate formulations to Newton’s formulation of classical mechanics allow us to use scalar quantities such as kinetic or potential energy to find the equations of motion. These alternate formulations are so powerful that they can be used to deduce Maxwell’s and other continuous field equations. In fact, the quantum mechanical Hamiltonian comes from the classical one by substituting operators for the classical dynamical variables. The chapter discusses the connection between linear algebra and quantum mechanics and reviews the basic theory. The discussion of the harmonic oscillator introduces the ladder operators and vacuum state, and prepares the way for the harmonic oscillator theory of the electromagnetic field encounter in quantum optics. The chapter includes quantum mechanical representation theory along with the time dependent perturbation theory. The density operator plays a central role in emission and absorption theory.
This chapter begins by exploiting the Einstein–de Broglie relation and the notion of symbol, as defined in Eq. (3.6.6). The following steps are the local and global conservation laws associated to the Schrödinger equation, the probabilistic interpretation of the wave function, the spreading of wave packets and transformation properties of wave functions. The solution of the Schrödinger equation for a given initial condition is then studied. For this purpose, one first expands the initial condition in terms of eigenfunctions of the Hamiltonian operator. This is then ‘propagated’ to determine the evolution of the wave function. Thus, one is led to consider the Green kernel of the Schrödinger equation, and the boundary conditions on the wave function that lead to complete knowledge of stationary states. A dynamics involving an isometric non-unitary operator is also studied. The chapter ends with an elementary introduction to harmonic oscillators and to the JWKB method in wave mechanics, plus examples on the Bohr–Sommerfeld quantization. From classical to wave mechanics The correspondence between differential operators and polynomials in k relies on the notion of the symbol defined in Eq. (3.6.6). Now we are aiming to pass from a function on phase space, i.e. the classical Hamiltonian, to an operator which, by analogy, is called the Hamiltonian operator. Such a transition is non-trivial because the map from symbols to operators contains some ambiguity. Such a transition is always possible if polynomials in p have constant coefficients. When this is not the case, i.e. if the coefficients are functions on the configuration space, there is an obvious ambiguity in the association of an operator with xp or px , for instance.
Quantum mechanics can be formulated either in terms of matrix mechanics or in terms of wave mechanics. This chapter centers on a discussion of the historical origins, mathematical structure, and extension to non-Hermitian quantum theory of matrix mechanics. The development of atomic discrete spectra and the old quantum theory showed that classical mechanics could not account for the discreteness of atomic energy levels and spectral lines, which motivated Heisenberg, Born, Jordan, and others to establish matrix mechanics centered on noncommuting physical quantities. Combining the Bohr atomic model, angular momentum quantization, and radiative transitions, one can see how matrix mechanics describes the energy level structure and quantum transitions of atomic systems, and how the Heisenberg equation of motion gives the fundamental form of quantum dynamics. The example of the harmonic oscillator further shows that the discreteness of the energy spectrum can be obtained directly from the matrix method, thereby establishing a clear connection among transition frequencies, matrix elements, and radiation-induced transitions. The matrix representation corresponds to the operator theory in Hilbert space, where state vectors, inner products, complete bases, and spectral decomposition constitute the fundamental mathematical framework of quantum mechanics. For closed quantum systems, physical observables are generally required to be represented by Hermitian or self-adjoint operators, so as to ensure that their eigenvalues possess the physically acceptable property of being real numbers. The Hermiticity of an operator is also closely related to its domain and boundary conditions, which provides a mathematical possibility for the emergence of non-Hermitian Hamiltonians. Based on these discussions, this chapter further explains how non-Hermitian dynamics is connected with open systems, dissipative processes, and special boundary conditions, thereby demonstrating the natural connection between traditional matrix mechanics and modern non-Hermitian quantum theory.
Bohr’s correspondence principle is that associated with each observable in classical mechanics is an observable in quantum mechanics that follows certain quantization axioms which can be used to explain the energy spectra of atoms and quantum oscillators. In Schrodinger’s wave mechanics, the state of the system at any time is described by a density operator in a Hilbert space. The chapter describes how the Pauli equation can be used to calculate the average electric dipole moment and average magnetic dipole moment of an atom in an external electromagnetic field. This calculation enables to calculate the electric polarization field and the magnetization field of a material.