Real knowledge is to know the extent of one's ignorance. Confucius, 500 BCE Summary The topic of this chapter is a small selection of the vast array of experimentally observed phenomena chosen to exemplify crucial roles played by the electron– electron interaction. Examples in the present chapter bring out the effects of correlation in ground and excited states as well as in thermal equilibrium. These raise challenges for theory and quantitative many-body methods in treating interacting electrons, the topics of the following chapters. The title of this book is Interacting Electrons . Of course, there are no non-interacting electrons: in any system with more than one electron, the electron–electron interaction affects the energy and leads to correlation between the electrons. All first-principles theories deal with the electron–electron interaction in some way, but often they treat the electrons as independent fermions in a static mean-field potential that contains interaction effects approximately. As described in Ch. 4, the Hartree–Fock method is a variational approximation with a wavefunction for fermions that are uncorrelated, except for the requirement of antisymmetry. The Kohn–Sham approach to DFT defines an auxiliary system of independent fermions that is chosen to reproduce the ground-state density. It is exact in principle and remarkably successful in practice. However, many properties such as excitation energies are not supposed to be taken directly from the Kohn–Sham equations, even in principle. Various other methods attempt to incorporate some effect of correlation in the choice of the potential. This chapter is designed to highlight a few examples of experimentally observed phenomena that demonstrate qualitative consequences of electron–electron interactions beyond independent-particle approximations. Some examples illustrate effects that cannot be accounted for in any theory where electrons are considered as independent particles. Others are direct experimental measurements of correlation functions that would vanish if the electrons were independent. In yet other cases, a phenomenon can be explained in terms of independent particles in some effective potential, but it is deeply unsatisfying if one has to invent a different potential for every case, even for different properties in the same material. A satisfactory theory ultimately requires us to confront the problem of interacting, correlated electrons.
By introducing a set of auxiliary equations representing a many-body system, we have derived an extension of the Kohn-Sham scheme for the density functional theory. These equations consist of a Kohn-Sham-type equation determining single-particle orbitals and an eigen-value equation for an effective many-body problem. A variational method similar to the Kohn-Sham technique was utilized to derive effective interactions as well as effective potentials without artificial substitution of a Hubbard-type interaction and a mean-field correction in the energy functional. The second equation is described by an effective many-body Hamiltonian with both 2-body interactions and mean-field terms. Rigorous formulation of the extended Kohn-Sham equation is also given in accordance with the Hadjisavvas-Theophilou formulation. Our formulation can be interpreted as a way to define models of the strongly correlated electron systems, e.g. the Hubbard model
Let us now discuss how to go beyond single electron quantum mechanics to that of multiple electrons. We will discuss how to account for Pauli exclusion principle properly in the bandstructure, and not just in the occupation statistics. To explore many particle rules systematically, we will need to understand second quantization. Readers may choose to skip this chapter and come back to it later when we discuss interacting systems, particularly, scattering and correlation effects. We will introduce creation and annihilation operators as a way to enforce wavefunction symmetry under particle exchange, and how it leads to the second quantized Hamiltonian. A simple limit is the Hartree Fock theory that marries Coulomb interactions with Pauli exclusion. In this context, we discuss Feynman diagrams as a way to visually describe the underlying processes. We also discuss symmetry of phonon operators, the use of Green's functions to solve their responses to external perturbations, and the concept of self energies as a way to capture complicated interactions not directly included in the electronic potential.
The method of correlated basis functions provides a means of systematically exploiting our intuitive understanding of real physical systems. Here we seek especially to develop a formalism for describing systems of strongly interacting fermions, for example, nuclei and liquid
He3, using a complete set of correlated functions ${\ensuremath{\Psi}}_{\mathrm{m}}=\frac{F{\ensuremath{\Phi}}_{\mathrm{m}}}{{({\ensuremath{\Phi}}_{\mathrm{m}}, {F}^{2}{\ensuremath{\Phi}}_{\mathrm{m}})}^{\frac{1}{2}}}$.
F is taken as a product of two-body factors, $\ensuremath{\Pi}{i<j}^{}[f({r}_{\mathrm{ij}})]$, the
f(rij) embodying at least the correlations arising from strong short-range repulsions; and ${{\ensuremath{\Phi}}_{\mathrm{m}}}$, a set of independent-particle-model functions which might serve as a basis in the absence of highly singular interactions. The matrix elements
Hmn,
Nmn of the Hamiltonian and identity operators with respect to the correlated basis ${{\ensuremath{\Psi}}_{\mathrm{m}}}$ are evaluated by generalization of cluster-expansion techniques developed originally for the calculation of the partition function of a classical imperfect gas and adapted to the quantum-mechanical many-body problem by Iwamoto and Yamada. Contributions to our expansions for the
Hmn are classified according to order of magnitude in the quantity $\ensuremath{\rho}\ensuremath{\omega}$, where $\ensuremath{\omega}=\ensuremath{\int}({f}^{2}(r)\ensuremath{-}1)d\mathrm{r}$ is a "correlation parameter" and $\ensuremath{\rho}$ the average particle density. To the extent that $|\ensuremath{\rho}\ensuremath{\omega}|$ is small, it provides a true expansion parameter. A detailed technical discussion of the cluster expansions is given, with special emphasis on their symmetry properties upon truncation. Although the many-body problem is soluble by simultaneous diagonalization of the matrices (
Hmn) and (
Nmn), it is preferable first to transform to an orthonormal basis of "unperturbed" correlated functions ${{\ensuremath{\Theta}}_{\mathrm{m}}}$ with respect to which the Hamiltonian and identity operators have the matrix representations (
Hmn) and $({N}_{\mathrm{mn}})=({\ensuremath{\delta}}_{\mathrm{mn}})$, and then to attempt the separate diagonalization of (
Hmn). In general, such a transformation is expedited by the L\"owdin procedure carried out to the desired order in $\ensuremath{\rho}\ensuremath{\omega}$. However, a Schmidt orthogonalization scheme might prove more advantageous in specific cases. Field-theoretic techniques (of both perturbative and nonperturbative nature) may be brought to bear in the diagonalization of (
Hmn). The inverse of the unitary transformation which takes the basis ${{\ensuremath{\Phi}}_{\mathrm{m}}}$ into the basis ${{\ensuremath{\Theta}}_{\mathrm{m}}}$, applied to the given singular Hamiltonian, leads---for any
F in the class considered---to a non-singular "effective Hamiltonian." Following this formal cue, we set out to construct explicitly a second-quantized effective Hamiltonian which generates the same matrix elements, to prescribed order in $\ensuremath{\rho}\ensuremath{\omega}$, when operating between independent-particle kets of the model occupation-number representation, as does the given Hamiltonian in the configuration-space representation, between the corresponding correlated functions of the L\"owdin basis. The quasiparticles described by this effective Hamiltonian interact via well-behaved two-body, three-body, \ifmmode\cdot\else\textperiodcentered\fi{}\ifmmode\cdot\else\textperiodcentered\fi{}\ifmmode\cdot\else\textperiodcentered\fi{},
Q-body, \ifmmode\cdot\else\textperiodcentered\fi{}\ifmmode\cdot\else\textperiodcentered\fi{}\ifmmode\cdot\else\textperiodcentered\fi{} potentials, in contrast to the highly singular two-body interactions of the real particles. For small $|\ensuremath{\rho}\ensuremath{\omega}|$, the effective two-body forces predominate. An avenue to deeper understanding of the applicability of the nuclear-shell model and the dressed-quasiparticle theory of liquid
He3 has been opened. This article treats only the formalism for a uniform extended medium. Numerical calculations, as well as the extension of the method to finite systems, will follow.
We propose a new, alternative method for ab-initio calculations of the electronic structure of solids, which has been specifically adapted to treat many-body effects in a more rigorous way than many existing ab-initio methods. We start from a standard band-structure calculation for an effective one-particle Hamiltonian approximately describing the material of interest. This yields a suitable set of one-particle basis functions, from which well localized Wannier functions can be constructed using a method proposed by Marzari and Vanderbilt. Within this (minimal) basis of localized Wannier functions the matrix elements of the non-interacting (one-particle) Hamiltonian as well as the Coulomb matrix elements can be calculated. The result is a many-body Hamiltonian in second quantization with parameters determined from first principles calculations for the material of interest. The Hamiltonian is in the form of a multi-band Hamiltonian in second quantization (a kind of extended, multi-band Hubbard model) such that all the standard many-body methods can be applied. We explicitly show how this approach can be solved in the simplest many-body approximation, the mean-field Hartree-Fock approximation (HFA), which takes into account exact exchange and corrects for self-interaction effects.