Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Wireless Telecommunications Symposium

Simplified Path Split Strategy for SCL Decoding Algorithm with Lower Latency

Yiling Peng, Huihui Wu, Pingping Chen, Lin Wang

Published Apr 6, 2022• 2 citations
Publisher

Abstract

This work focuses on further reducing the decoding latency of the successive cancellation list (SCL) algorithm for polar codes, considering the fact that some path splitting may be unnecessary if a bit is reliable during the transmission. Specifically, during the node-wise SCL decoding progress, only unreliable bits need to conduct path clone, leading to the reduction of the number of path splitting and the decoding latency. On this basis, this paper proposes an improved simplified SCL (SSCL) algorithm and an improved Fast-SCL (FSCL) algorithm, for low-latency polar decoding. Simulation results performed on a (4096, 2048) polar code show that the improved SSCL algorithm reduces the decoding latency by around 44.7% when L = 4, and by 62.8% when L = 8, respectively. Moreover, the improved FSCL algorithm achieves a reduction of decoding latency by about 37.3% when L = 8, for a (4096, 3840) polar code.

DOI
10.1109/wts53620.2022.9768320

Related papers

An Improved Simplified Successive-Cancellation List Decoding of Polar Codes

Yu Guo, Shufeng Li, Mingyu Cai

The Successive-Cancellation List (SCL) algorithm is a popular decoding algorithm for polar codes. Although SCL algorithm overcomes the error propagation problem in polar codes decoding, the improvement of error correction performance needs to pay the price of high latency. To solve this problem, a simplified SCL (SSCL) algorithm is proposed. For some special nodes, the SSCL algorithm can calculate path metric (PM) without traversing the decoding tree to achieve direct decoding, reducing the latency and complexity of decoding. In this paper, a new special node has been discovered, it is also possible to calculate PM without traversing decoding tree. Based on this, we propose an improved SSCL algorithm. Simulation results show that improved SSCL algorithm can further reduce the decoding latency and the loss of error-correction performance is negligible.

IEEE International Conference on Computer and Communication Engineering Technology (CCET)•Aug 19, 2022•1 citation

Fast Sequence Repetition Node-Based Successive Cancellation List Decoding for Polar Codes

Yifei Shen, Yuqing Ren, Andreas Toftegaard Kristensen +4 more

Compared with the bit-wise successive cancellation list (SCL) decoding of polar codes, the node-based Fast SCL decoding significantly reduces the decoding latency by identifying special constituent codes and decoding these in parallel. To further reduce the latency of current Fast SCL decoders, we first propose a fast sequence repetition (SR) node-based SCL (Fast SR-SCL) decoding algorithm, which only involves one type of node in the SCL decoding tree. Furthermore, we employ the adaptive path splitting (APS) strategy to terminate the path splitting in the SR node early, without degrading the error-correcting performance. Numerical results show that for 5G uplink codes with a length of 1024 and rates of 1/4, 1/2, and 3/4, our decoder can deliver the same decoding performance while reducing the average latency by 34.5%, 38.0%, and 39.6% compared with the state-of-the-art Fast SCL decoder for a list size L = 8.

International Conference on Communications•May 16, 2022•9 citations

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

arXiv:1701.08126•Jan 27, 2017•4 citations

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

IEEE Wireless Communications and Networking Conference Workshops (WCNCW)•Mar 1, 2017•89 citations

Fast Successive-Cancellation List Flip Decoding of Polar Codes

Nghia Doan, Seyyed Ali Hashemi, Warren J. Gross

This work presents a fast successive-cancellation list flip (Fast-SCLF) decoding algorithm for polar codes that addresses the high latency issue associated with the successive-cancellation list flip (SCLF) decoding algorithm. We first propose a bit-flipping strategy tailored to the state-of-the-art fast successive-cancellation list (FSCL) decoding that avoids tree-traversal in the binary tree representation of SCLF, thus reducing the latency of the decoding process. We then derive a parameterized path selection error model to accurately estimate the bit index at which the correct decoding path is eliminated from the initial FSCL decoding. The trainable parameter is optimized online based on an efficient supervised learning framework. Simulation results show that for a polar code of length 512 with 256 information bits, with similar error-correction performance and memory consumption, the proposed Fast-SCLF decoder reduces up to 73.4% of the average decoding latency of the SCLF decoder with the same list size at the frame error rate of 10−4, while incurring a maximum computational complexity overhead of 27.6%. For the same polar code of length 512 with 256 information bits and at practical signal-to-noise ratios, the proposed decoder with list size 4 reduces 89.3% and 43.7% of the average complexity and decoding latency of the FSCL decoder with list size 32 (FSCL-32), respectively, while also reducing 83.2% of the memory consumption of FSCL-32. The significant improvements of the proposed decoder come at the cost of 0.07 dB error-correction performance degradation compared with FSCL-32.

arXiv:2109.12239•IEEE Access•Jan 1, 2022•9 citations

A Split-Reduced Successive Cancellation List Decoder for Polar Codes

Zhaoyang Zhang, Liang Zhang, Xianbin Wang +2 more

This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.

arXiv:1511.02150•IEEE Journal on Selected Areas in Communications•Nov 30, 2015•77 citations
This work focuses on further reducing the decoding latency of the successive cancellation list (SCL) algorithm for polar codes, considering the fact that some path splitting may be unnecessary if a bit is reliable during the transmission. Specifically, during the node-wise SCL decoding progress, only unreliable bits need to conduct path clone, leading to the reduction of the number of path splitting and the decoding latency. On this basis, this paper proposes an improved simplified SCL (SSCL) algorithm and an improved Fast-SCL (FSCL) algorithm, for low-latency polar decoding. Simulation results performed on a (4096, 2048) polar code show that the improved SSCL algorithm reduces the decoding latency by around 44.7% when L = 4, and by 62.8% when L = 8, respectively. Moreover, the improved FSCL algorithm achieves a reduction of decoding latency by about 37.3% when L = 8, for a (4096, 3840) polar code.
The Successive-Cancellation List (SCL) algorithm is a popular decoding algorithm for polar codes. Although SCL algorithm overcomes the error propagation problem in polar codes decoding, the improvement of error correction performance needs to pay the price of high latency. To solve this problem, a simplified SCL (SSCL) algorithm is proposed. For some special nodes, the SSCL algorithm can calculate path metric (PM) without traversing the decoding tree to achieve direct decoding, reducing the latency and complexity of decoding. In this paper, a new special node has been discovered, it is also possible to calculate PM without traversing decoding tree. Based on this, we propose an improved SSCL algorithm. Simulation results show that improved SSCL algorithm can further reduce the decoding latency and the loss of error-correction performance is negligible.
Compared with the bit-wise successive cancellation list (SCL) decoding of polar codes, the node-based Fast SCL decoding significantly reduces the decoding latency by identifying special constituent codes and decoding these in parallel. To further reduce the latency of current Fast SCL decoders, we first propose a fast sequence repetition (SR) node-based SCL (Fast SR-SCL) decoding algorithm, which only involves one type of node in the SCL decoding tree. Furthermore, we employ the adaptive path splitting (APS) strategy to terminate the path splitting in the SR node early, without degrading the error-correcting performance. Numerical results show that for 5G uplink codes with a length of 1024 and rates of 1/4, 1/2, and 3/4, our decoder can deliver the same decoding performance while reducing the average latency by 34.5%, 38.0%, and 39.6% compared with the state-of-the-art Fast SCL decoder for a list size L = 8.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
This work presents a fast successive-cancellation list flip (Fast-SCLF) decoding algorithm for polar codes that addresses the high latency issue associated with the successive-cancellation list flip (SCLF) decoding algorithm. We first propose a bit-flipping strategy tailored to the state-of-the-art fast successive-cancellation list (FSCL) decoding that avoids tree-traversal in the binary tree representation of SCLF, thus reducing the latency of the decoding process. We then derive a parameterized path selection error model to accurately estimate the bit index at which the correct decoding path is eliminated from the initial FSCL decoding. The trainable parameter is optimized online based on an efficient supervised learning framework. Simulation results show that for a polar code of length 512 with 256 information bits, with similar error-correction performance and memory consumption, the proposed Fast-SCLF decoder reduces up to 73.4% of the average decoding latency of the SCLF decoder with the same list size at the frame error rate of 10−4, while incurring a maximum computational complexity overhead of 27.6%. For the same polar code of length 512 with 256 information bits and at practical signal-to-noise ratios, the proposed decoder with list size 4 reduces 89.3% and 43.7% of the average complexity and decoding latency of the FSCL decoder with list size 32 (FSCL-32), respectively, while also reducing 83.2% of the memory consumption of FSCL-32. The significant improvements of the proposed decoder come at the cost of 0.07 dB error-correction performance degradation compared with FSCL-32.
This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.