Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

RIS aided Physical Layer Key Generation of IoT network in Static Environments

Jie Yang, Xinsheng Ji, Kaizhi Huang, Liang Wang, ge niu, jianlei zhao

Published Apr 25, 2022• 0 citations
Publisher

Abstract

Physical layer secret key generation schemes can provide lightweight encryption for resource constrained Inter?net of Things (IoT) devices. However, many IoT devices are stationary and the environment is usually static, which leads to ultra-low/zero secret key rates. To circumvent this problem, a novel secret key generation scheme based on Reconfigurable Intelligent Surface (RIS) is proposed for Multiple-Input Single?Output IoT communications. The RIS is introduced into the network, and the phase shifts at RIS are tuned randomly in each frame, which superimpose time-varying reflection channels on the orginal channels. And then the secret key capacity of all nodes within the cell coverage area can be remarkably improved. The closed-form expressions of secret key capacity taking into account eavesdropping are first derived for the case studies of independent and correlated channels. We can conclude that sharing the same phase shifts randomness will not bring key information leakage. Compared with three benchmark schemes, the proposed scheme can both maintain good performance whenever eavesdropping nodes exist. Further, the impact of parameters, such as the number of reflecting units, the transmit antennas and the Rician factor, on secret key performance are analyzed respectively, which can offer guidelines for system design. Finally, simulation results verify the theoretical analysis.

DOI
10.36227/techrxiv.19625646.v1

Related papers

RIS aided Physical Layer Key Generation of IoT network in Static Environments

Jie Yang, Xinsheng Ji, Kaizhi Huang +2 more

Physical layer secret key generation schemes can provide lightweight encryption for resource-constrained Internet of Things (IoT) devices. However, many IoT devices are stationary and the environment is usually static, which leads to ultra-low/zero secret key rates. To circumvent this problem, a novel secret key generation scheme based on Reconfigurable Intelligent Surface (RIS) is proposed for Multiple-Input Single-Output IoT communications. The RIS is introduced into the network, and the phase shifts at RIS are tuned randomly in each frame, which makes time-varying reflection channels superimposed on the original channels. And then, the secret key capacity of all nodes within the cell coverage area can be remarkably improved. Compared with the existing methods, the scheme is loosely coupled with the existing communication system. The closed-form expressions of secret key capacity taking into account eavesdropping are first derived for the case studies of independent and correlated channels. We can conclude that sharing the same phase shifts randomness will not bring key information leakage. Compared with existing user-introduced randomness schemes, the proposed scheme can maintain good performance as the number of eavesdropping nodes increases. Further, the impact of parameters, such as the number of reflecting units, the transmit antennas, and the Rician factor, on secret key performance are analyzed respectively, which can offer guidelines for system design. Finally, simulation results verify the theoretical analysis.

•Apr 25, 2022•0 citations

RIS aided Physical Layer Key Generation of IoT network in Static Environments

Jie Yang, Xinsheng Ji, Kaizhi Huang +3 more

Physical layer secret key generation schemes can provide lightweight encryption for resource-constrained Internet of Things (IoT) devices. However, many IoT devices are stationary and the environment is usually static, which leads to ultra-low/zero secret key rates. To circumvent this problem, a novel secret key generation scheme based on Reconfigurable Intelligent Surface (RIS) is proposed for Multiple-Input Single-Output IoT communications. The RIS is introduced into the network, and the phase shifts at RIS are tuned randomly in each frame, which makes time-varying reflection channels superimposed on the original channels. And then, the secret key capacity of all nodes within the cell coverage area can be remarkably improved. Compared with the existing methods, the scheme is loosely coupled with the existing communication system. The closed-form expressions of secret key capacity taking into account eavesdropping are first derived for the case studies of independent and correlated channels. We can conclude that sharing the same phase shifts randomness will not bring key information leakage. Compared with existing user-introduced randomness schemes, the proposed scheme can maintain good performance as the number of eavesdropping nodes increases. Further, the impact of parameters, such as the number of reflecting units, the transmit antennas, and the Rician factor, on secret key performance are analyzed respectively, which can offer guidelines for system design. Finally, simulation results verify the theoretical analysis.

•Oct 18, 2022•0 citations

Secret key generation scheme based on RIS antenna for static environments

杰 杨, 新生 季, 开枝 黄 +2 more

A conventional secret key generation scheme achieves a low secret key rate in static environments. To solve this problem, the reconfigurable intelligent surface (RIS) antenna is merged with the device at the base station and is firstly proposed for secret key generation. By tuning the phase shifts at the RIS, a random varying beam can be generated and combined with the original wireless channel to form a new equivalent channel so that the key capacity is not subject to the time variance of the wireless channel. Then the closed-form solution is derived. Theoretical analysis and simulation show that the performance can be increased to that of a fast varying channel with limited radiating units. Moreover, the proposed scheme is superior to the existing schemes, in which the RIS is used as a reflective surface, over performance gain and preventing information disclosure. To further develop the gain of RIS, a joint design scheme is proposed, where some units are used for key generation, and some units are used for beamforming. Finally, the joint's closed-form solution scheme is derived. Finally, on the basis of satisfying the key capacity and communication performance, an optimal resource allocation strategy is proposed. Simulation results illustrate that the key capacity and communication performance can be improved simultaneously.

Scientia Sinica Informationis•Nov 24, 2021•4 citations

RIS-Aided Physical Layer Key Generation of IoT Network in Static Environments (March 2023)

Jie Yang, Xiaoyan Hu, Xinsheng Ji +3 more

Physical layer secret key generation (SKG) technology can provide lightweight encryption for resource-constrained Internet of Things (IoT) devices. However, many IoT devices are stationary, and the environment is usually static, which leads to ultralow/zero secret key rates. To circumvent this problem, a novel SKG scheme based on reconfigurable intelligent surface (RIS) is proposed for multiple-input single-output (MISO) communications. First, the phase shifts at the RIS are tuned randomly in each frame, which makes time-varying reflection channels superimposed on the original channels. Correspondingly, the key capacity of all nodes within the cell coverage area can be remarkably improved. Compared with the existing methods, the scheme is loosely coupled with the original system. Besides, the closed-form expressions of key capacity taking into account eavesdropping are derived for the case studies of independent and correlated channels. Based on these derivations, we can conclude that sharing the same phase shifts randomness will not lead to key information leakage. More importantly, compared with user-introduced randomness schemes, the proposed scheme can maintain good performance even the number of eavesdropping nodes increases. Furthermore, the impacts of critical parameters on key performance are analyzed, respectively, which offers guidelines for system design. Finally, simulation results verify the theoretical analysis.

IEEE Sensors Journal•Oct 18, 2023•7 citations

RIS-Assisted Multi-Carrier Secret Key Generation in Static Environments

Ji Hong Gu, Chongjun Ouyang, Xin Zhang +1 more

Physical layer key generation (PLKG) is a promising method to generate secret keys by harnessing the randomness of wireless channels. In this letter, a reconfigurable intelligent surface (RIS)-assisted multi-carrier PLKG framework is proposed to overcome the lack of channel randomness in static environments. Specifically, the secret key generation rate (SKGR) is analyzed based on the inter-frequency correlation among the channel coefficients across subcarriers. Building upon this analysis, a novel scheme for configuring RIS elements is proposed to enhance the SKGR by introducing correlations into the random phase shifts of RIS elements. Simulation results are presented to validate the effectiveness of the proposed scheme.

IEEE Wireless Communications Letters•Aug 16, 2024•1 citation

Secret key generation for reconfigurable intelligent surface‐assisted MISO multi‐user system

Kexin Liu, Mingliang Li, Kaizhi Huang +5 more

Abstract Reconfigurable intelligent surface (RIS)‐assisted physical layer key generation plays an important role in the eavesdropping problem on a typical multi‐user scenario of wireless networks. Existing RIS‐assisted physical key generation technology mainly solved the security issues in the single‐antenna and multi‐user scenario, which is based on the idealistic assumption of a spatially independent channel model at the RIS. It limits the degrees of freedom and neglects the existence of channel spatial correlation, which would possibly degrade the sum key generation rate (SKGR). To solve the above problem, this paper proposes a secret key generation scheme for RIS‐assisted multiple‐input single‐output multi‐user system. This scheme establishes a spatial correlation channel model, which comprehensively considers the influence of spatial correlation among antennas of the base station (BS), multi‐user, and RIS elements on SKGR. Based on this, a key generation framework is designed to generate a more secure secret key with the maximum SKGR. Specifically, a closed‐form SKGR expression and an optimization problem formulation are obtained to obtain the joint optimal coefficient of the BS and RIS. Then, the difference convex‐successive convex approximation based alternating optimization algorithm is proposed to solve this optimization problem. The simulation results show that the proposed scheme has improved 10‐bit/channel use compared with the randomization scheme of BS precoding and RIS reflection coefficient. It also has an improvement of 12‐bit/channel use compared with the spatially independent scheme.

IET Communications•Nov 17, 2024•0 citations
Physical layer secret key generation schemes can provide lightweight encryption for resource constrained Inter?net of Things (IoT) devices. However, many IoT devices are stationary and the environment is usually static, which leads to ultra-low/zero secret key rates. To circumvent this problem, a novel secret key generation scheme based on Reconfigurable Intelligent Surface (RIS) is proposed for Multiple-Input Single?Output IoT communications. The RIS is introduced into the network, and the phase shifts at RIS are tuned randomly in each frame, which superimpose time-varying reflection channels on the orginal channels. And then the secret key capacity of all nodes within the cell coverage area can be remarkably improved. The closed-form expressions of secret key capacity taking into account eavesdropping are first derived for the case studies of independent and correlated channels. We can conclude that sharing the same phase shifts randomness will not bring key information leakage. Compared with three benchmark schemes, the proposed scheme can both maintain good performance whenever eavesdropping nodes exist. Further, the impact of parameters, such as the number of reflecting units, the transmit antennas and the Rician factor, on secret key performance are analyzed respectively, which can offer guidelines for system design. Finally, simulation results verify the theoretical analysis.
Physical layer secret key generation schemes can provide lightweight encryption for resource-constrained Internet of Things (IoT) devices. However, many IoT devices are stationary and the environment is usually static, which leads to ultra-low/zero secret key rates. To circumvent this problem, a novel secret key generation scheme based on Reconfigurable Intelligent Surface (RIS) is proposed for Multiple-Input Single-Output IoT communications. The RIS is introduced into the network, and the phase shifts at RIS are tuned randomly in each frame, which makes time-varying reflection channels superimposed on the original channels. And then, the secret key capacity of all nodes within the cell coverage area can be remarkably improved. Compared with the existing methods, the scheme is loosely coupled with the existing communication system. The closed-form expressions of secret key capacity taking into account eavesdropping are first derived for the case studies of independent and correlated channels. We can conclude that sharing the same phase shifts randomness will not bring key information leakage. Compared with existing user-introduced randomness schemes, the proposed scheme can maintain good performance as the number of eavesdropping nodes increases. Further, the impact of parameters, such as the number of reflecting units, the transmit antennas, and the Rician factor, on secret key performance are analyzed respectively, which can offer guidelines for system design. Finally, simulation results verify the theoretical analysis.
Physical layer secret key generation schemes can provide lightweight encryption for resource-constrained Internet of Things (IoT) devices. However, many IoT devices are stationary and the environment is usually static, which leads to ultra-low/zero secret key rates. To circumvent this problem, a novel secret key generation scheme based on Reconfigurable Intelligent Surface (RIS) is proposed for Multiple-Input Single-Output IoT communications. The RIS is introduced into the network, and the phase shifts at RIS are tuned randomly in each frame, which makes time-varying reflection channels superimposed on the original channels. And then, the secret key capacity of all nodes within the cell coverage area can be remarkably improved. Compared with the existing methods, the scheme is loosely coupled with the existing communication system. The closed-form expressions of secret key capacity taking into account eavesdropping are first derived for the case studies of independent and correlated channels. We can conclude that sharing the same phase shifts randomness will not bring key information leakage. Compared with existing user-introduced randomness schemes, the proposed scheme can maintain good performance as the number of eavesdropping nodes increases. Further, the impact of parameters, such as the number of reflecting units, the transmit antennas, and the Rician factor, on secret key performance are analyzed respectively, which can offer guidelines for system design. Finally, simulation results verify the theoretical analysis.
A conventional secret key generation scheme achieves a low secret key rate in static environments. To solve this problem, the reconfigurable intelligent surface (RIS) antenna is merged with the device at the base station and is firstly proposed for secret key generation. By tuning the phase shifts at the RIS, a random varying beam can be generated and combined with the original wireless channel to form a new equivalent channel so that the key capacity is not subject to the time variance of the wireless channel. Then the closed-form solution is derived. Theoretical analysis and simulation show that the performance can be increased to that of a fast varying channel with limited radiating units. Moreover, the proposed scheme is superior to the existing schemes, in which the RIS is used as a reflective surface, over performance gain and preventing information disclosure. To further develop the gain of RIS, a joint design scheme is proposed, where some units are used for key generation, and some units are used for beamforming. Finally, the joint's closed-form solution scheme is derived. Finally, on the basis of satisfying the key capacity and communication performance, an optimal resource allocation strategy is proposed. Simulation results illustrate that the key capacity and communication performance can be improved simultaneously.
Physical layer secret key generation (SKG) technology can provide lightweight encryption for resource-constrained Internet of Things (IoT) devices. However, many IoT devices are stationary, and the environment is usually static, which leads to ultralow/zero secret key rates. To circumvent this problem, a novel SKG scheme based on reconfigurable intelligent surface (RIS) is proposed for multiple-input single-output (MISO) communications. First, the phase shifts at the RIS are tuned randomly in each frame, which makes time-varying reflection channels superimposed on the original channels. Correspondingly, the key capacity of all nodes within the cell coverage area can be remarkably improved. Compared with the existing methods, the scheme is loosely coupled with the original system. Besides, the closed-form expressions of key capacity taking into account eavesdropping are derived for the case studies of independent and correlated channels. Based on these derivations, we can conclude that sharing the same phase shifts randomness will not lead to key information leakage. More importantly, compared with user-introduced randomness schemes, the proposed scheme can maintain good performance even the number of eavesdropping nodes increases. Furthermore, the impacts of critical parameters on key performance are analyzed, respectively, which offers guidelines for system design. Finally, simulation results verify the theoretical analysis.
Physical layer key generation (PLKG) is a promising method to generate secret keys by harnessing the randomness of wireless channels. In this letter, a reconfigurable intelligent surface (RIS)-assisted multi-carrier PLKG framework is proposed to overcome the lack of channel randomness in static environments. Specifically, the secret key generation rate (SKGR) is analyzed based on the inter-frequency correlation among the channel coefficients across subcarriers. Building upon this analysis, a novel scheme for configuring RIS elements is proposed to enhance the SKGR by introducing correlations into the random phase shifts of RIS elements. Simulation results are presented to validate the effectiveness of the proposed scheme.
Abstract Reconfigurable intelligent surface (RIS)‐assisted physical layer key generation plays an important role in the eavesdropping problem on a typical multi‐user scenario of wireless networks. Existing RIS‐assisted physical key generation technology mainly solved the security issues in the single‐antenna and multi‐user scenario, which is based on the idealistic assumption of a spatially independent channel model at the RIS. It limits the degrees of freedom and neglects the existence of channel spatial correlation, which would possibly degrade the sum key generation rate (SKGR). To solve the above problem, this paper proposes a secret key generation scheme for RIS‐assisted multiple‐input single‐output multi‐user system. This scheme establishes a spatial correlation channel model, which comprehensively considers the influence of spatial correlation among antennas of the base station (BS), multi‐user, and RIS elements on SKGR. Based on this, a key generation framework is designed to generate a more secure secret key with the maximum SKGR. Specifically, a closed‐form SKGR expression and an optimization problem formulation are obtained to obtain the joint optimal coefficient of the BS and RIS. Then, the difference convex‐successive convex approximation based alternating optimization algorithm is proposed to solve this optimization problem. The simulation results show that the proposed scheme has improved 10‐bit/channel use compared with the randomization scheme of BS precoding and RIS reflection coefficient. It also has an improvement of 12‐bit/channel use compared with the spatially independent scheme.