We show an algorithm for the previously proposed quantum computer using classical apparatuses. The target system is not limited to mass points but is a general engineering system that has a more manageable form in equipping terminal edge. After we define such system as “ordinary engineering system,” the method of quantum mechanical optimum feedback control of the nonlinear system is applied. The method makes an ordinary engineering system into a quantum one. As an example that is as stale as possible, a temperature control system is taken. Simulation studies show that our system works as a 1-qubit quantum computer without the special large-scale peripheral equipment required to maintain quantumness. The proposed system is a classic system that is everywhere, so it is easy for anyone to understand. Another advantage is that easy-to-use one-dimensional system can be applied.
We show an algorithm for the previously proposed quantum computer using classical apparatuses. The target system is not limited to mass points but is a general engineering system that has a more manageable form in equipping terminal edge. After we define such system as “ordinary engineering system,” the method of quantum mechanical optimum feedback control of the nonlinear system is applied. The method makes an ordinary engineering system into a quantum one. As an example that is as stale as possible, a temperature control system is taken. Simulation studies show that our system works as a 1-qubit quantum computer without the special large-scale peripheral equipment required to maintain quantumness. The proposed system is a classic system that is everywhere, so it is easy for anyone to understand. Another advantage is that easy-to-use one-dimensional system can be applied.
We propose simple feedback control systems that work as quantum computing apparatuses applied to industrial terminal edge. The important point of quantum calculation is to keep quantum wave as superposition states. So far, the authors have proposed quantum computing by measuring the motion trajectory of macroscopic mass points. The purpose is, for example, to equip the microcomputer of the terminal of the vehicle with an unnecessary quantum computer of a large-scale device. However, it is necessary to search for a system that is easier to use than mass motion. In this paper, we show that an affine system becomes a quantum system if appropriate feedback is input, and that this is applied to quantum computation. One of the authors has developed optimal quantum mechanical feedback for nonlinear control systems. This method is applied to a time invariant linear affine control system with quadratic costs selected for concise explanation. As a result, systems that follow thermal phenomenology can be treated as quantum systems. Replace qubit and control apparatus that drives the qubit state in the current quantum computer with a fluid box and fluid temperature feedback loop. This gives a new quantum computer system without peripherals to keep, for example, cryogenic temperature.
Quantum computers have gained widespread interest as they can potentially solve problems that are intractable even for today’s supercomputers, such as the simulation of quantum systems as initially proposed by Feynman. To achieve such tremendous progress, a quantum computer relies on processing the information stored in quantum bits (qubits), the fundamental units of quantum computation, similar to the bits in a classical (i.e., non-quantum) processor. In general, a quantum processor comprising several qubits is connected through a quantum-to-classical interface consisting of classical electrical circuits for manipulating and reading out their quantum state. The accuracy of an operation on a qubit is characterized using the fidelity, which is 100 % in case of a perfect operation. In practice, a fidelity between 99 % and 99.9 % is typically achieved in today’s experiments with less than 100 qubits, limited by non-idealities in the control signals and by the implementation of the physical qubit itself. Since such qubit fidelities are too low to execute relevant quantum algorithms, quantum error correction schemes have been developed which rely on a much larger number of qubits to correct for possible errors, resulting in the need for quantum processors with thousands or millions of qubits. Solid-state qubits promise the largescale integration required to scale to millions of qubits, as they exploit the lithographic fabrication techniques borrowed from the semiconductor industry. However, state-of-theart solid-state qubits, such as transmons and single-electron spin qubits, must be typically cooled to cryogenic temperatures in a dilution refrigerator to exhibit quantum behavior. Because of the limited number of qubits (< 100) in state-of-theart solid-state quantum processors, the classical controller is currently implemented by general-purpose instruments or by tailor-made controllers operating at room temperature connected via several wires to the qubits in the cryogenic chamber. However, these systems must scale to support millions of qubits. While scaling up the underlying quantum processor is already exceptionally challenging, building the electronics required to interface such a large-scale processor is just as relevant and arduous.
All the data stored and processed by our computers is encoded as sequences of zeros and ones, called bits. Quantum computers offer an alternative to this traditional way of encoding and manipulating information. The information in a collection of qubits can be a combination, also called a superposition, over many possible sequences of zeros and ones. Where classical computation consists of flipping zeros and ones, quantum computation consists of manipulating high-dimensional vectors called quantum states. Researchers have found ways to use this to engineer quantum algorithms that solve some tasks much faster than any classical computer would. These are called quantum advantages, and are proven for specific tasks, such as breaking some encryption schemes and solving certain large linear systems. The goal of this thesis was to find new tasks for which quantum computers provably have an advantage over classical computers. In this thesis, I present two such advantages and associated results. The first one revolves around a physically relevant learning task. In other words, I explore how quantum computers can be used to help solve specialized machine learning tasks. The second one addresses the simulation of classical systems. One of the first high-potential and natural uses of quantum computers was the simulation of quantum systems. A lot of real-world problems, however, are ruled by classical physics. It turns out that quantum computers are well suited for the simulation of some exponentially large classical systems. In this thesis, I add a new problem to this list.
In the preceding chapter we introduced quantum trajectories: the evolution of the state of a quantum system conditioned on monitoring its outputs. As discussed in the preface, one of the chief motivations for modelling such evolution is for quantum feedback control. Quantum feedback control can be broadly defined as follows. Consider a detector continuously producing an output, which we will call a current. Feedback is any process whereby a physical mechanism makes the statistics of the present current at a later time depend upon the current at earlier times. Feedback control is feedback that has been engineered for a particular purpose, typically to improve the operation of some device. Quantum feedback control is feedback control that requires some knowledge of quantum mechanics to model. That is, there is some part of the feedback loop that must be treated (at some level of sophistication) as a quantum system. There is no implication that the whole apparatus must be treated quantum mechanically.
Quantum computation is a completely new and different paradigm for how to store and process information. It offers the possibility of exponential computational advantage for certain types of hard problems, but the hardware for implementing quantum algorithms is still at an early stage. The basic idea of quantum computing is to replace the ordinary binary bits of conventional computing with their quantum equivalent, or qubit. A qubit can be any quantum system whose states can be prepared and controlled, provided that we can then fabricate them in large quantities and then couple them to one another in prescribed ways. While there are several candidate technologies for building a quantum computer, one of the most promising is superconducting quantum circuits, operated at cryogenic temperatures approaching 0.01 K.
Hybrid quantum-classical algorithms hold great promise for solving quantum control problems on near-term quantum computers. In this work, we employ the hybrid framework that integrates digital quantum simulation with classical optimization to achieve optimal engineering of quantum many-body systems. To evaluate the overall performance of this method, we introduce a general metric termed control optimality, which accounts for constraints on both classical and quantum components. As a concrete example, we investigate the time-optimal control for perfect state transfer in a one-dimensional spin model using the variational quantum algorithm, closely approaching the quantum speed limit. Moreover, we discuss the emergent gradient behavior and error robustness, demonstrating the feasibility of applying hybrid quantum algorithms to solve quantum optimal control problems. These results establish a systematic framework for hybrid algorithms to address quantum control problems on near-term quantum platforms.