Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Sensing and Nano Electronics and Photonics

Precision timing of radio-frequency pulses using Rydberg atom electrometry

Stephanie M. Bohaichuk, Donald W. Booth, James P. Shaffer

Published Mar 4, 2022• 0 citations
Publisher

Abstract

In this work, we present theoretical and experimental data on detecting pulsed radio frequency fields. We focus on pulse arrival time detection accuracy. We measure two-photon Rydberg atom EIT in response to ~μs pulse-modulated radio-frequency signals resonant with a Rydberg-Rydberg transition, using a room temperature cesium vapor cell with the lasers locked on atomic resonances. We study the dependence of the atomic response on optical and radio-frequency Rabi frequencies as well as effects such as atomic collisions, ionization, and transit time broadening. We find good agreement with time-dependent simulations performed using a density matrix approach, with a dark state added to account for Rydberg atom decay. We present factors that can influence the sensitivity and timing precision of radio frequency pulses detected under these conditions. Such a system demonstrates potential for the detection of weak radio-frequency pulses in communications and radar applications.

DOI
10.1117/12.2609012

Related papers

Origins of Rydberg-Atom Electrometer Transient Response and Its Impact on Radio-Frequency Pulse Sensing

Stephanie M. Bohaichuk, Donald W. Booth, Kent A. Nickerson +2 more

Rydberg atoms show significant promise as the basis for highly sensitive detectors of continuous radio-frequency (rf) electric fields (E fields). Here, we study their time-dependent response to pulse-modulated rf E fields at 19.4 GHz using a cesium vapor cell at room temperature. We use density-matrix simulations to explain the timescales that shape the transient atomic response under different laser conditions, finding them to be limited by dephasing mechanisms, including transit-time broadening, Rydberg-Rydberg collisions, and ionization. Using a matched filter, we demonstrate the detection of individual pulses with durations from 10 \textmu{}s down to 50 ns and amplitudes from 15 000 \textmu{}V ${\mathrm{cm}}^{\ensuremath{-}1}$ down to about 170 \textmu{}V ${\mathrm{cm}}^{\ensuremath{-}1}$, corresponding to a sensitivity of about 240 nV ${\mathrm{cm}}^{\ensuremath{-}1}$ ${\mathrm{Hz}}^{\ensuremath{-}1/2}$. Finally, we highlight the potential of a Rydberg vapor cell as a receiver by detecting pulse trains from a rotating emitter on a simulated passing aircraft.

arXiv:2203.01733•Physical Review Applied•Sep 13, 2022•76 citations

Three-photon Rydberg atom electrometry with enhanced sensitivity

Vijin Venu, Stephanie M. Bohaichuk, Florian Christaller +3 more

In this work, we present a high-sensitivity, all-optical, atom-based radio-frequency electrometry technique, implemented via a collinear three-photon excitation scheme in a room-temperature cesium vapor cell. By employing a wave-vector matching condition unique to cesium, our approach reduces the residual Doppler broadening so that it does not dominate the electromagnetically induced absorption linewidth, achieving linewidths below 200 kHz. The narrow linewidth enables the expansion of the self-calibrated Autler-Townes sensing regime and increased sensitivity when compared to methods where Doppler broadening dominates the linewidth. In this paper, we report our latest sensitivity measurements which successfully detected radio-frequency (RF) Rabi frequencies of 2π×43 kHz using a 480 kHz measurement bandwidth at 10.7 GHz, corresponding to a sensitivity of 45 nV/cm/ √ Hz. The results of our experiment show a thirteen-fold improvement compared to our previously reported findings for all-optical atom-based electrometry. Our measurements demonstrate the ability to detect time-varying signals suitable for radar and communication applications with high sensitivity.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•2 citations

Sensitivity comparison of Rydberg atom-based radio frequency electric field detection: Ionization current versus optical readout

Dangka Shylla, Rajavardhan Talashila, Alexandra B. Artusio‐Glimpse +7 more

We investigate a technique for detecting radio frequency (RF) electric fields in a cesium (Cs) vapor cell at room temperature by collecting charges from ionized Rydberg atoms and compare its performance with the established method of electromagnetically induced transparency (EIT). By applying a known RF field, we measure the response from both the electrical (ionization current-based) and optical (EIT-based) readouts. The ionization current-based method yields a sensitivity of 22 μ V m−1 Hz−1/2, while the EIT-based method achieves 3.7 μ V m−1 Hz−1/2. The sensitivity of the ionization current-based method is limited by the 2.2 k Ω resistance between the collection electrodes, attributed to a thin Cs film on the inner surfaces of the vapor cell. Controlling or eliminating the Cs layer can significantly improve the sensitivity of this ionization approach.

arXiv:2509.15463•AVS Quantum Science•Jan 27, 2026•0 citations

Probing bandwidth and sensitivity in Rydberg atom sensing via optical homodyne and rf heterodyne detection

Dixith Manchaiah, Stone Oliver, Samuel Berweger +2 more

Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.

arXiv:2509.20632•Physical Review A•Dec 22, 2025•8 citations

Time dependence of Rydberg EIT in pulsed optical and RF fields

Rachel Sapiro, Georg A. Raithel, David Alexander Anderson

Abstract We investigate the time dependence of atom-light and atom-RF field interactions in Rydberg electromagnetically-induced transparency (EIT) in a room-temperature and heated vapour cell. Quantum-optical transients are observed with rapid onset and dissolution of EIT induced by coupler-light pulses. The formulation and dissolution times of EIT, transient signals, and their dependencies on light intensities and Rydberg-atom density are studied. Simulations of pulsed EIT are performed by solving a time-dependent three-level master equation, whose results are in excellent agreement with experimental observations, including accurately reproducing quantum-optical transients observed at both onset and dissolution. We explore the time-dependent response of EIT to RF fields resonant with a Rydberg–Rydberg transition. An upper limit to the fundamental atom-RF field response time and instantaneous RF detection bandwidth with EIT-based sensors and receivers is established.

Journal of Physics B Atomic Molecular and Optical Physics•Feb 7, 2020•38 citations

Coherent Rydberg-atom engineering for radio-frequency sensing

Matthias Schmidt

In this work, theoretical and experimental works on Rydberg-atom based radio-frequency (RF) sensors are presented. The results were obtained in close collaboration with the Quantum Valley Ideas Lab, whose goal is the miniaturization and prototyping of these sensors. The Rydberg-atom based RF sensors utilize lasers to coherently excite an atomic vapor in a vapor cell at room temperature to a highly excited Rydberg state, which is extremely sensitive to external environmental influences. In this work, Rydberg-atom based RF sensing is described as coherent multi-photon interference in the atom-light coupled system by introducing atom-light coherences. The presence of the RF wave influences the absorption of a probe laser propagating through the atomic medium. The atomic response of the Rydberg-atoms can be engineered by changing the atom-light coherences through laser power and frequency. Analytic expressions for the atomic response to the incident RF wave are derived in the weak probe limit and provide a deeper understanding of the underlying coherent multi-photon interference processes, which help to further tailor the Rydberg-atom for the purpose of the application. Good agreement with full numerical simulations of the Lindblad-master equation is found. An analysis of the various Doppler limits strongly motivates an excitation scheme where the effective wave vector mismatch on the Rydberg transition vanishes, as a promising candidate to achieve narrower spectral linewidths and, consequently, a higher sensitivity. The level structure of cesium presents a unique three-photon excitation scheme where residual Doppler shifts become comparable to the spectral linewidth of the coupling lasers. The experimental realization of this excitation scheme is demonstrated. A spectral linewidth of the Rydberg transition of 190 kHz is achieved. The measurements present the world record sensitivity, 45 nV/cm/Hz^1/2, for all-optical RF sensing with room temperature operation. These results make the three-photon excitation scheme a prime candidate for the next generation of Rydberg-atom based RF sensor prototypes. Finally, all-optical phase-sensitive RF detection is theoretically investigated in a closed-loop excitation scheme. An analytic expression is derived that intuitively describes the atomic response. Furthermore, it provides insights into the probe intensity dynamics that occur when the system is operated under finite detuning. These oscillatory dynamics allow for the extraction of the in- (I) and out- (Q) of-phase response to the RF wave, thereby enabling the simultaneous detection of the RF E-field amplitude and phase. A blueprint for the experimental realization is presented, and angle-of-arrival tolerances for the RF wave are estimated. A quadrature amplitude modulation (QAM) sequence was modelled and the simultaneous extraction of the phase and amplitude of the RF wave of interest was successfully demonstrated.

•Jan 1, 2025•0 citations
In this work, we present theoretical and experimental data on detecting pulsed radio frequency fields. We focus on pulse arrival time detection accuracy. We measure two-photon Rydberg atom EIT in response to ~μs pulse-modulated radio-frequency signals resonant with a Rydberg-Rydberg transition, using a room temperature cesium vapor cell with the lasers locked on atomic resonances. We study the dependence of the atomic response on optical and radio-frequency Rabi frequencies as well as effects such as atomic collisions, ionization, and transit time broadening. We find good agreement with time-dependent simulations performed using a density matrix approach, with a dark state added to account for Rydberg atom decay. We present factors that can influence the sensitivity and timing precision of radio frequency pulses detected under these conditions. Such a system demonstrates potential for the detection of weak radio-frequency pulses in communications and radar applications.
Rydberg atoms show significant promise as the basis for highly sensitive detectors of continuous radio-frequency (rf) electric fields (E fields). Here, we study their time-dependent response to pulse-modulated rf E fields at 19.4 GHz using a cesium vapor cell at room temperature. We use density-matrix simulations to explain the timescales that shape the transient atomic response under different laser conditions, finding them to be limited by dephasing mechanisms, including transit-time broadening, Rydberg-Rydberg collisions, and ionization. Using a matched filter, we demonstrate the detection of individual pulses with durations from 10 \textmu{}s down to 50 ns and amplitudes from 15 000 \textmu{}V ${\mathrm{cm}}^{\ensuremath{-}1}$ down to about 170 \textmu{}V ${\mathrm{cm}}^{\ensuremath{-}1}$, corresponding to a sensitivity of about 240 nV ${\mathrm{cm}}^{\ensuremath{-}1}$ ${\mathrm{Hz}}^{\ensuremath{-}1/2}$. Finally, we highlight the potential of a Rydberg vapor cell as a receiver by detecting pulse trains from a rotating emitter on a simulated passing aircraft.
In this work, we present a high-sensitivity, all-optical, atom-based radio-frequency electrometry technique, implemented via a collinear three-photon excitation scheme in a room-temperature cesium vapor cell. By employing a wave-vector matching condition unique to cesium, our approach reduces the residual Doppler broadening so that it does not dominate the electromagnetically induced absorption linewidth, achieving linewidths below 200 kHz. The narrow linewidth enables the expansion of the self-calibrated Autler-Townes sensing regime and increased sensitivity when compared to methods where Doppler broadening dominates the linewidth. In this paper, we report our latest sensitivity measurements which successfully detected radio-frequency (RF) Rabi frequencies of 2π×43 kHz using a 480 kHz measurement bandwidth at 10.7 GHz, corresponding to a sensitivity of 45 nV/cm/ √ Hz. The results of our experiment show a thirteen-fold improvement compared to our previously reported findings for all-optical atom-based electrometry. Our measurements demonstrate the ability to detect time-varying signals suitable for radar and communication applications with high sensitivity.
We investigate a technique for detecting radio frequency (RF) electric fields in a cesium (Cs) vapor cell at room temperature by collecting charges from ionized Rydberg atoms and compare its performance with the established method of electromagnetically induced transparency (EIT). By applying a known RF field, we measure the response from both the electrical (ionization current-based) and optical (EIT-based) readouts. The ionization current-based method yields a sensitivity of 22 μ V m−1 Hz−1/2, while the EIT-based method achieves 3.7 μ V m−1 Hz−1/2. The sensitivity of the ionization current-based method is limited by the 2.2 k Ω resistance between the collection electrodes, attributed to a thin Cs film on the inner surfaces of the vapor cell. Controlling or eliminating the Cs layer can significantly improve the sensitivity of this ionization approach.
Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.
Abstract We investigate the time dependence of atom-light and atom-RF field interactions in Rydberg electromagnetically-induced transparency (EIT) in a room-temperature and heated vapour cell. Quantum-optical transients are observed with rapid onset and dissolution of EIT induced by coupler-light pulses. The formulation and dissolution times of EIT, transient signals, and their dependencies on light intensities and Rydberg-atom density are studied. Simulations of pulsed EIT are performed by solving a time-dependent three-level master equation, whose results are in excellent agreement with experimental observations, including accurately reproducing quantum-optical transients observed at both onset and dissolution. We explore the time-dependent response of EIT to RF fields resonant with a Rydberg–Rydberg transition. An upper limit to the fundamental atom-RF field response time and instantaneous RF detection bandwidth with EIT-based sensors and receivers is established.
In this work, theoretical and experimental works on Rydberg-atom based radio-frequency (RF) sensors are presented. The results were obtained in close collaboration with the Quantum Valley Ideas Lab, whose goal is the miniaturization and prototyping of these sensors. The Rydberg-atom based RF sensors utilize lasers to coherently excite an atomic vapor in a vapor cell at room temperature to a highly excited Rydberg state, which is extremely sensitive to external environmental influences. In this work, Rydberg-atom based RF sensing is described as coherent multi-photon interference in the atom-light coupled system by introducing atom-light coherences. The presence of the RF wave influences the absorption of a probe laser propagating through the atomic medium. The atomic response of the Rydberg-atoms can be engineered by changing the atom-light coherences through laser power and frequency. Analytic expressions for the atomic response to the incident RF wave are derived in the weak probe limit and provide a deeper understanding of the underlying coherent multi-photon interference processes, which help to further tailor the Rydberg-atom for the purpose of the application. Good agreement with full numerical simulations of the Lindblad-master equation is found. An analysis of the various Doppler limits strongly motivates an excitation scheme where the effective wave vector mismatch on the Rydberg transition vanishes, as a promising candidate to achieve narrower spectral linewidths and, consequently, a higher sensitivity. The level structure of cesium presents a unique three-photon excitation scheme where residual Doppler shifts become comparable to the spectral linewidth of the coupling lasers. The experimental realization of this excitation scheme is demonstrated. A spectral linewidth of the Rydberg transition of 190 kHz is achieved. The measurements present the world record sensitivity, 45 nV/cm/Hz^1/2, for all-optical RF sensing with room temperature operation. These results make the three-photon excitation scheme a prime candidate for the next generation of Rydberg-atom based RF sensor prototypes. Finally, all-optical phase-sensitive RF detection is theoretically investigated in a closed-loop excitation scheme. An analytic expression is derived that intuitively describes the atomic response. Furthermore, it provides insights into the probe intensity dynamics that occur when the system is operated under finite detuning. These oscillatory dynamics allow for the extraction of the in- (I) and out- (Q) of-phase response to the RF wave, thereby enabling the simultaneous detection of the RF E-field amplitude and phase. A blueprint for the experimental realization is presented, and angle-of-arrival tolerances for the RF wave are estimated. A quadrature amplitude modulation (QAM) sequence was modelled and the simultaneous extraction of the phase and amplitude of the RF wave of interest was successfully demonstrated.