Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Slow-light dispersion of a cavity polariton in an organic crystal microcavity

Masamitsu Amano, Kazuhito Otsuka, Tohru Fujihara, Hisao Kondo, Kazuki Bando

Published Mar 28, 2022• 3 citations
Publisher

Abstract

Herein, we have measured the phase dispersion of a cavity polariton in a single-crystalline anthracene microcavity via interference spectroscopy. Results show slow-light dispersion at the cavity polariton's lower polariton resonance, which agrees well with the transfer matrix method calculation results. According to the theoretical calculations, the slow-light dispersion's group refractive index is 24. We found that the structural dispersion due to a phenomenological photon cavity and material dispersion caused by the exciton contributed to the large group refractive index. These efforts will aid in realizing optical buffer memories for organic microcavities.

DOI
10.1063/5.0079497

Related papers

Slow-light microcavities

Vincent Huet, Alphonse Rasoloniaina, Pierre Guillemé +7 more

Summary form only given. Optical microcavities with high quality factors Q are of great interest in integrated micro- and nanophotonics. Their narrow resonance and long photon lifetime (τcav) can be used in fundamental physics, sensing applications, microwave signal optical processing or for optical delay line and memory miniaturization [1]. Considering a Lorentzian resonance profile, the quality factor and the photon lifetime of a microcavity with a resonant angular frequency ωο = 2·πε/λ0reads: Q = ω0τcab= nG(ω0)LF/λ0, (1) where ngis the group index of the material constituting the microcavity, F is the finesse and L is the cavity round-trip length. The usual method to obtain ultra-high quality factors consists in optimizing the manufacturing process to reach high finesse values. Following this approach record quality factors up to 1011have been measured in millimetric CaF2 whispering gallery mode (WGM) resonators [2]. Otherwise, Eq. (1) shows that for a given finesse, the use of resonators made with slow-light materials displaying high group indices can also increase the quality factor. This method has already been successfully implemented in bulky resonators including a highly dispersive slow-light medium [3]. We have recently demonstrated that this approach can be applied to solid-state optical micro-resonators [4]. The slow-light effect was introduced thanks to population oscillations in an Er3+doped WGM fluoride glass microsphere (diameter 100 μm). Since the lifetime of the4I13/2level is very long (T ≈ 10 ms) strong group index up to 106can be obtained. Using a cavity-ring-down method (see Fig. 1) in a pump probe configuration, we have measured a photon lifetime of 2.5 ms at 1530 nm corresponding to a quality factor of 3 × 1012[4].

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•0 citations

Millisecond Photon Lifetime in a Slow-Light Microcavity

Vincent Huet, Alphonse Rasoloniaina, Pierre Guillemé +7 more

Optical microcavities with ultralong photon storage times are of central importance for integrated nanophotonics. To date, record quality (Q) factors up to 10^{11} have been measured in millimetric-size single-crystal whispering-gallery-mode (WGM) resonators, and 10^{10} in silica or glass microresonators. We show that, by introducing slow-light effects in an active WGM microresonator, it is possible to enhance the photon lifetime by several orders of magnitude, thus circumventing both fabrication imperfections and residual absorption. The slow-light effect is obtained from coherent population oscillations in an erbium-doped fluoride glass microsphere, producing strong dispersion of the WGM (group index n_{g}∼10^{6}). As a result, a photon lifetime up to 2.5 ms at room temperature has been measured, corresponding to a Q factor of 3×10^{12} at 1530 nm. This system could yield a new type of optical memory microarray with ultralong storage times.

Physical Review Letters•Mar 29, 2016•98 citations

Why material slow light does not improve cavity-enhanced atom detection

B. Megyeri, A. Lampis, Graeme Harvie +2 more

We discuss the prospects for enhancing absorption and scattering of light from a weakly coupled atom in a high-finesse optical cavity by adding a medium with large, positive group index of refraction. The slow-light effect is known to narrow the cavity transmission spectrum and increase the photon lifetime, but the quality factor of the cavity may not be increased in a metrologically useful sense. Specifically, detection of the weakly coupled atom through either cavity ringdown measurements or the Purcell effect fails to improve with the addition of material slow light. A single-atom model of the dispersive medium helps elucidate why this is the case.

arXiv:1705.01028•Journal of Modern Optics•Oct 6, 2017•1 citation

EFFECT OF DEFECT LAYER THICKNESS ON SLOW LIGHT IN ONE-DIMENSIONAL PHOTONIC CRYSTALS

Huiping Tian, Yuefeng Ji

Group velocity and dispersion property of slow light in one-dimensional photonic crystal with different defect layer thicknesses are studied. It is found that the increase of defect layer thickness will induce the decrease of group velocity, which is an advantage to the design of optical buffer. However, the dispersion slope is increased, inducing a limited factor to keep the shape of ultra-short pulses. Then the effect of slight violation of defect layer thicknesses, refractive index and incident angle on the slow light is studied. The result shows that these influences are smaller at the first gap which is useful for the practical uses.

Modern Physics Letters B•Mar 30, 2009•4 citations

Broadrange tunable slow and fast light in quantum dot photonic crystal structure

A. Lotfian, Reza Yadipour, Hamed Baghban

Slow and fast light processes, based on both structural and material dispersions, are realized in a wide tuning range in this article. Coherent population oscillations (CPO) in electrically tunable quantum dot semiconductor optical amplifiers lead to a variable group index ranging from the background index ( n bgd ) to ∼ 30. A photonic crystal waveguide is then dispersion engineered and a group index of 260 with the normalized delay-bandwidth product (NDBP) of 0.65 is achieved in the proposed waveguide. Using comprehensive numerical simulations, we show that a considerable enhancement of slow light effect can be achieved by combining both the material and the structural dispersions in the proposed active QDPCW structure. We compare our developed FDTD results with analytical results and show that there is good agreement between the results, which demonstrates that the proposed electrically-tunable slow light idea is obtainable in the QDPCW structure. We achieve a total group index in a wide tuning range from n bgd to ∼ 1500 at the operation bandwidth, which shows a significant enhancement compared with the schemes based only on material or structural dispersions. The tuning range and also NDBP of the slow light scheme are much larger than those of the electrically tunable CPO process.

Chinese Physics B•Dec 1, 2017•2 citations

Slow light in quantum dot photonic crystal waveguides

Torben Roland Nielsen, Andrei V. Lavrinenko, Jesper Mørk

A theoretical analysis of pulse propagation in a semiconductor quantum dot photonic crystal waveguide in the regime of electromagnetically induced transparency is presented. The slow light mechanism considered here is based on both material and waveguide dispersion. The group index ng for the combined system is significantly enhanced relative to slow light based on purely material or waveguide dispersion.

Applied Physics Letters•Mar 16, 2009•24 citations
Herein, we have measured the phase dispersion of a cavity polariton in a single-crystalline anthracene microcavity via interference spectroscopy. Results show slow-light dispersion at the cavity polariton's lower polariton resonance, which agrees well with the transfer matrix method calculation results. According to the theoretical calculations, the slow-light dispersion's group refractive index is 24. We found that the structural dispersion due to a phenomenological photon cavity and material dispersion caused by the exciton contributed to the large group refractive index. These efforts will aid in realizing optical buffer memories for organic microcavities.
Summary form only given. Optical microcavities with high quality factors Q are of great interest in integrated micro- and nanophotonics. Their narrow resonance and long photon lifetime (τcav) can be used in fundamental physics, sensing applications, microwave signal optical processing or for optical delay line and memory miniaturization [1]. Considering a Lorentzian resonance profile, the quality factor and the photon lifetime of a microcavity with a resonant angular frequency ωο = 2·πε/λ0reads: Q = ω0τcab= nG(ω0)LF/λ0, (1) where ngis the group index of the material constituting the microcavity, F is the finesse and L is the cavity round-trip length. The usual method to obtain ultra-high quality factors consists in optimizing the manufacturing process to reach high finesse values. Following this approach record quality factors up to 1011have been measured in millimetric CaF2 whispering gallery mode (WGM) resonators [2]. Otherwise, Eq. (1) shows that for a given finesse, the use of resonators made with slow-light materials displaying high group indices can also increase the quality factor. This method has already been successfully implemented in bulky resonators including a highly dispersive slow-light medium [3]. We have recently demonstrated that this approach can be applied to solid-state optical micro-resonators [4]. The slow-light effect was introduced thanks to population oscillations in an Er3+doped WGM fluoride glass microsphere (diameter 100 μm). Since the lifetime of the4I13/2level is very long (T ≈ 10 ms) strong group index up to 106can be obtained. Using a cavity-ring-down method (see Fig. 1) in a pump probe configuration, we have measured a photon lifetime of 2.5 ms at 1530 nm corresponding to a quality factor of 3 × 1012[4].
Optical microcavities with ultralong photon storage times are of central importance for integrated nanophotonics. To date, record quality (Q) factors up to 10^{11} have been measured in millimetric-size single-crystal whispering-gallery-mode (WGM) resonators, and 10^{10} in silica or glass microresonators. We show that, by introducing slow-light effects in an active WGM microresonator, it is possible to enhance the photon lifetime by several orders of magnitude, thus circumventing both fabrication imperfections and residual absorption. The slow-light effect is obtained from coherent population oscillations in an erbium-doped fluoride glass microsphere, producing strong dispersion of the WGM (group index n_{g}∼10^{6}). As a result, a photon lifetime up to 2.5 ms at room temperature has been measured, corresponding to a Q factor of 3×10^{12} at 1530 nm. This system could yield a new type of optical memory microarray with ultralong storage times.
We discuss the prospects for enhancing absorption and scattering of light from a weakly coupled atom in a high-finesse optical cavity by adding a medium with large, positive group index of refraction. The slow-light effect is known to narrow the cavity transmission spectrum and increase the photon lifetime, but the quality factor of the cavity may not be increased in a metrologically useful sense. Specifically, detection of the weakly coupled atom through either cavity ringdown measurements or the Purcell effect fails to improve with the addition of material slow light. A single-atom model of the dispersive medium helps elucidate why this is the case.
Group velocity and dispersion property of slow light in one-dimensional photonic crystal with different defect layer thicknesses are studied. It is found that the increase of defect layer thickness will induce the decrease of group velocity, which is an advantage to the design of optical buffer. However, the dispersion slope is increased, inducing a limited factor to keep the shape of ultra-short pulses. Then the effect of slight violation of defect layer thicknesses, refractive index and incident angle on the slow light is studied. The result shows that these influences are smaller at the first gap which is useful for the practical uses.
Slow and fast light processes, based on both structural and material dispersions, are realized in a wide tuning range in this article. Coherent population oscillations (CPO) in electrically tunable quantum dot semiconductor optical amplifiers lead to a variable group index ranging from the background index ( n bgd ) to ∼ 30. A photonic crystal waveguide is then dispersion engineered and a group index of 260 with the normalized delay-bandwidth product (NDBP) of 0.65 is achieved in the proposed waveguide. Using comprehensive numerical simulations, we show that a considerable enhancement of slow light effect can be achieved by combining both the material and the structural dispersions in the proposed active QDPCW structure. We compare our developed FDTD results with analytical results and show that there is good agreement between the results, which demonstrates that the proposed electrically-tunable slow light idea is obtainable in the QDPCW structure. We achieve a total group index in a wide tuning range from n bgd to ∼ 1500 at the operation bandwidth, which shows a significant enhancement compared with the schemes based only on material or structural dispersions. The tuning range and also NDBP of the slow light scheme are much larger than those of the electrically tunable CPO process.