Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optica

Full-Stokes polarimetric measurements and imaging using a fractal superconducting nanowire single-photon detector

Nan Hu, Yun Meng, Kai Zou, Yifan Feng, Zifan Hao, Stephan Steinhauer, Samuel Gyger, Val Zwiller, Xiaolong Hu

Published Mar 9, 2022• 39 citations
Publisher

Abstract

Measuring the states of polarization (SoP) of light is fundamentally important for applications ranging from communication, sensing, spectroscopy, imaging, to navigation. Superconducting nanowire single-photon detectors (SNSPDs) are ideal detectors of choice for faint-light detection and measurements, but SNSPDs themselves cannot resolve the SoP of photons. Here, based on a fractal SNSPD, we demonstrate a full-Stokes polarimetric measurement system that can measure arbitrary SoP of faint light. The measured SoPs are in excellent agreement with those of a state-of-the-art commercial polarimeter, but the sensitivity of our system reaches − 86.6 d B m , which is 26.6 dB better than that of the commercial counterpart. As a direct application, we further demonstrate remote polarimetric imaging (i.e., polarimetric LiDAR) with a complete set of polarimetric contrast.

DOI
10.1364/optica.451737

Related papers

Fractal superconducting nanowire single-photon detectors and their applications in polarimetric imaging

Xiaolong Hu, Yun Meng, Kai Zou +15 more

In this paper, we review the research and development of the fractal superconducting nanowire single-photon detectors (SNSPDs), including our demonstrations of high-performance devices and systems with over 80% system detection efficiency, negligibly low residual polarization sensitivity, and low timing jitter. Using the fractal SNSPDs, we demonstrate full-Stokes polarimetric imaging LiDAR.

Advanced Photon Counting Techniques•Apr 19, 2024•4 citations

Fractal Superconducting Nanowire Single-Photon Detectors and Their Applications in Imaging

Yifan Feng, Yun Meng, Kai Zou +9 more

We present our research on fractal superconducting nanowire single-photon detectors and their applications in light detection and ranging (LiDAR), full-Stokes polarimetric imaging, and non-line-of-sight imaging. © 2022 The Author(s)

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jul 1, 2022•1 citation

Fractal Superconducting Nanowire Single-Photon Detectors and Their Applications in Imaging

Yifan Feng, Yun Meng, Kai Zou +9 more

We present our research on fractal superconducting nanowire single-photon detectors and their applications in light detection and ranging (LiDAR), full-Stokes polarimetric imaging, and non-line-of-sight imaging.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jan 1, 2022•0 citations

Polarization resolving and imaging with a single-photon sensitive superconducting nanowire array

Xing-Qu Sun, Weijun Zhang, Chengjun Zhang +7 more

Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near-infrared single-photon detection due to their outstanding performance. However, conventional SNSPDs are generally used as binary photon-counting detectors. Another important characteristic of light, i.e., polarization, which can provide additional information of the object, has not been resolved using the standalone SNSPD. In this work, we present a first prototype of the polarimeter based on a four-pixel superconducting nanowire array, capable of resolving the polarization state of linearly-polarized light at the single-photon level. The detector array design is based on a division of focal plane configuration in which the orientation of each nanowire division (pixel) is offset by 45°. Each single nanowire pixel operates as a combination of a photon detector and almost linear polarization filter, with an average polarization extinction ratio of ∼10. The total system detection efficiency of the array is ∼1% at a total dark count rate of 680 cps, with a timing jitter of 126 ps, when the detector array is free-space coupled and illuminated with 1550-nm photons. The mean errors of the measured angle of polarization and degree of linear polarization were about -3° and 0.12, respectively. Furthermore, we successfully demonstrated polarization imaging at low-light level using the proposed detector. Our results pave the way for the development of a single-photon sensitive, fast, and large-scale integrated polarization polarimeter or imager. Such detector may find promising application in photon-starved polarization resolving and imaging with high spatial and temporal resolution.

arXiv:2005.09820•Optics Express•Mar 18, 2021•32 citations

Fractal superconducting nanowire single-photon detectors working in dual bands and their applications in free-space and underwater hybrid LIDAR

Kai Zou, Zifan Hao, Yifan Feng +6 more

We demonstrate a fiber-coupled fractal superconducting nanowire single-photon detector (SNSPD) system with minimum polarization dependence of detection efficiency. Its system detection efficiency (SDE) was maximized at the wavelength of 1540 nm, which was measured to be 91 ± 4%; furthermore, we observed the second local maximum of SDE at the wavelength of 520 nm, which was measured to be 61 ± 2%. This dual-band feature of SDE was due to the enhancement of the optical absorptance by two longitudinal resonance modes of the micro-cavity. By using high SDE with minimum polarization dependence in these two bands, we implemented a hybrid LIDAR for imaging the remote objects in free space and under water.

Optics Letters•Dec 14, 2022•17 citations

Polarizer-free measurement of the full Stokes vector using a fiber-coupled superconducting nanowire single photon detector with a polarization extinction ratio of ∼2

Yue Fei, Tianhao Ji, Guanghao Zhu +13 more

The characterization and manipulation of polarization state at single photon level are of great importance in research fields such as quantum information processing and quantum key distribution, where photons are normally delivered using single mode optical fibers. To date, the demonstrated polarimetry measurement techniques based on a superconducting nanowire single photon detector (SNSPD) require the SNSPD to be either highly sensitive or highly insensitive to the photon's polarization state, therefore placing an unavoidable challenge on the SNSPD's design and fabrication processes. In this article, we present the development of an alternative polarimetry measurement technique, of which the stringent requirement on the SNSPD's polarization sensitivity is removed. We validate the proposed technique by a rigorous theoretical analysis and comparisons of the experimental results obtained using a fiber-coupled SNSPD with a polarization extinction ratio of ∼2 to that obtained using other well-established known methods. Based on the full Stokes data measured by the proposed technique, we also demonstrate that at the single photon level (∼ -100 dBm), the polarization state of the photon delivered to the superconducting nanowire facet plane can be controlled at will using a further developed algorithm. Note that other than the fiber-coupled SNSPD, the only component involved is a quarter-wave plate (no external polarizer is necessary), which when aligned well has a paid insertion loss less than 0.5 dB.

Optics Express•Dec 9, 2022•2 citations
Measuring the states of polarization (SoP) of light is fundamentally important for applications ranging from communication, sensing, spectroscopy, imaging, to navigation. Superconducting nanowire single-photon detectors (SNSPDs) are ideal detectors of choice for faint-light detection and measurements, but SNSPDs themselves cannot resolve the SoP of photons. Here, based on a fractal SNSPD, we demonstrate a full-Stokes polarimetric measurement system that can measure arbitrary SoP of faint light. The measured SoPs are in excellent agreement with those of a state-of-the-art commercial polarimeter, but the sensitivity of our system reaches − 86.6 d B m , which is 26.6 dB better than that of the commercial counterpart. As a direct application, we further demonstrate remote polarimetric imaging (i.e., polarimetric LiDAR) with a complete set of polarimetric contrast.
Superconducting nanowire single-photon detectors (SNSPDs) have attracted remarkable interest for visible and near-infrared single-photon detection due to their outstanding performance. However, conventional SNSPDs are generally used as binary photon-counting detectors. Another important characteristic of light, i.e., polarization, which can provide additional information of the object, has not been resolved using the standalone SNSPD. In this work, we present a first prototype of the polarimeter based on a four-pixel superconducting nanowire array, capable of resolving the polarization state of linearly-polarized light at the single-photon level. The detector array design is based on a division of focal plane configuration in which the orientation of each nanowire division (pixel) is offset by 45°. Each single nanowire pixel operates as a combination of a photon detector and almost linear polarization filter, with an average polarization extinction ratio of ∼10. The total system detection efficiency of the array is ∼1% at a total dark count rate of 680 cps, with a timing jitter of 126 ps, when the detector array is free-space coupled and illuminated with 1550-nm photons. The mean errors of the measured angle of polarization and degree of linear polarization were about -3° and 0.12, respectively. Furthermore, we successfully demonstrated polarization imaging at low-light level using the proposed detector. Our results pave the way for the development of a single-photon sensitive, fast, and large-scale integrated polarization polarimeter or imager. Such detector may find promising application in photon-starved polarization resolving and imaging with high spatial and temporal resolution.
We demonstrate a fiber-coupled fractal superconducting nanowire single-photon detector (SNSPD) system with minimum polarization dependence of detection efficiency. Its system detection efficiency (SDE) was maximized at the wavelength of 1540 nm, which was measured to be 91 ± 4%; furthermore, we observed the second local maximum of SDE at the wavelength of 520 nm, which was measured to be 61 ± 2%. This dual-band feature of SDE was due to the enhancement of the optical absorptance by two longitudinal resonance modes of the micro-cavity. By using high SDE with minimum polarization dependence in these two bands, we implemented a hybrid LIDAR for imaging the remote objects in free space and under water.
The characterization and manipulation of polarization state at single photon level are of great importance in research fields such as quantum information processing and quantum key distribution, where photons are normally delivered using single mode optical fibers. To date, the demonstrated polarimetry measurement techniques based on a superconducting nanowire single photon detector (SNSPD) require the SNSPD to be either highly sensitive or highly insensitive to the photon's polarization state, therefore placing an unavoidable challenge on the SNSPD's design and fabrication processes. In this article, we present the development of an alternative polarimetry measurement technique, of which the stringent requirement on the SNSPD's polarization sensitivity is removed. We validate the proposed technique by a rigorous theoretical analysis and comparisons of the experimental results obtained using a fiber-coupled SNSPD with a polarization extinction ratio of ∼2 to that obtained using other well-established known methods. Based on the full Stokes data measured by the proposed technique, we also demonstrate that at the single photon level (∼ -100 dBm), the polarization state of the photon delivered to the superconducting nanowire facet plane can be controlled at will using a further developed algorithm. Note that other than the fiber-coupled SNSPD, the only component involved is a quarter-wave plate (no external polarizer is necessary), which when aligned well has a paid insertion loss less than 0.5 dB.