This article theoretically demonstrates the superiority of coherent control over the incoherent pump drive in exciting the localized surface plasmon (LSP) modes of a silver nanosphere adjacent to a three-level gain medium.
Abstract In this article, we theoretically investigate a spaser (surface plasmon amplification by stimulated emission of radiation) comprising a spherical silver nanoparticle surrounded by a four-level gain medium of quantum dots. The spaser system is pumped coherently and incoherently with the same excitation rate, and the characteristics of the resultant coherent localized surface plasmon (LSP) mode are compared for the two pumping scenarios. We provide a detailed analytical expression for the steady state and demonstrate that the incoherent pump is more suitable for the continuous spaser mode. The reason is better understood by studying the temporal evolution of the number of LSPs N n , where the LSP oscillation starts earlier for an incoherent drive and relaxes to a steady state with a large value of N n . At a large pump rate, the spaser curve shows saturation. In addition, we have found that the resonance peak of the spaser field is independent of coherent and incoherent pumping, whereas the peak amplitude of the field depends on the pump rate.
This article investigates a spaser geometry in which a silver nanoparticle is enclosed by \ensuremath{\Lambda}-type three-level gain media in the form of quantum dots. An intense Gaussian pump pulse induces population transfer in this \ensuremath{\Lambda}-type quantum dot gain medium. The transition energy from the gain medium is transferred to the nearby localized surface-plasmon (LSP) mode of the silver nanoparticle, resulting in a highly intense and coherent generation of LSPs. We demonstrate that an optimum value of pump-pulse width and pulse amplitude is required for an intense and coherent LSP generation. A Gaussian pump pulse can lead to Gaussian-shape temporal and spectral LSP profiles. However, as the pump pulse broadens, the Gaussian-shape LSP profile gets distorted, resulting in less intense and asymmetric temporal as well as spectral profiles. In practice, detuning typically exists between the pump frequency and the transition frequency of the quantum dot energy levels. Consequently, employing adiabatic rapid passage phenomena through a linearly chirped Gaussian pulse emerges as an effective technique for ensuring robust population transfer within the energy levels of the quantum dots. This further enhances the number of LSPs. Furthermore, the study addresses the effect of detuning noise in the output of the spaser system. Thus, a shaped pump pulse also enables manipulation of the temporal and spectral profiles of LSPs.