We describe our recent work on producing all-optical, tunable delays in optical waveguides, including schemes that can operate at high bandwidths suitable for telecommunications. Article not available.
The ubiquitous role of optical fibers in modern photonic systems has stimulated research to realize slow and fast light devices directly in this close-to-perfect transmission line. Recent progress in developing optically-controlled delays in optical fibers, operating under normal environmental conditions and at telecommunications wavelengths, has paved the way towards real applications for slow and fast light. Advanced schemes can be realized thanks to the extremely flexible possibility to shape the gain spectrum to make it optimized for applications. Ultra wide bandwidth, delaying with flat amplitude response and lower distortion were successfully demonstrated this way.
We demonstrate optically tunable delays in a silicon-on-insulator planar waveguide based on slow light induced by stimulated Raman scattering (SRS). Inside an 8-mm-long nanoscale waveguide, we produce a group-index change of 0.15 and generate controllable delays as large as 4 ps for signal pulses as short as 3 ps. The scheme can be implemented at bandwidths exceeding 100 GHz for wavelengths spanning the entire low-loss fiber-optics communications window and thus represents an important step in the development of chip-scale photonics devices that process light with light.
Slow and fast light processes, based on both structural and material dispersions, are realized in a wide tuning range in this article. Coherent population oscillations (CPO) in electrically tunable quantum dot semiconductor optical amplifiers lead to a variable group index ranging from the background index ( n bgd ) to ∼ 30. A photonic crystal waveguide is then dispersion engineered and a group index of 260 with the normalized delay-bandwidth product (NDBP) of 0.65 is achieved in the proposed waveguide. Using comprehensive numerical simulations, we show that a considerable enhancement of slow light effect can be achieved by combining both the material and the structural dispersions in the proposed active QDPCW structure. We compare our developed FDTD results with analytical results and show that there is good agreement between the results, which demonstrates that the proposed electrically-tunable slow light idea is obtainable in the QDPCW structure. We achieve a total group index in a wide tuning range from n bgd to ∼ 1500 at the operation bandwidth, which shows a significant enhancement compared with the schemes based only on material or structural dispersions. The tuning range and also NDBP of the slow light scheme are much larger than those of the electrically tunable CPO process.