Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

The ColdFlux RSFQ Cell Library for MIT-LL SFQ5ee Fabrication Process

Lieze Schindler, Johannes A. Delport, Coenrad Johann Fourie

Published Dec 16, 2021• 26 citations
Publisher

Abstract

The ColdFlux project, within the IARPA SuperTools program, aims to develop an open-source EDA tool suite for superconductor circuits, with focus on Rapid single flux quantum (RSFQ) and Adiabatic quantum-flux-parametron (AQFP) logic. The functionality of the ColdFlux tool suite is validated through the development of ready-to-use cell libraries. The process of establishing the open-source ColdFlux RSFQ cell library is documented, along with the set of EDA tools developed within the project required for each step. This includes the initial cell design using phase-based equations, circuit simulation, operating margin analysis, and cell parameter optimization. The row-based layout architecture for the RSFQ cell library is also presented. Several of the designed RSFQ cells are placed within test circuits and fabricated through the MIT-LL SFQ5ee fabrication process. We present the measured results for these test circuits and discuss design efficiency, potential improvements, and future work.

DOI
10.1109/tasc.2021.3135905

Related papers

Results From the ColdFlux Superconductor Integrated Circuit Design Tool Project

Coenrad Johann Fourie, Kyle Jackman, Johannes A. Delport +20 more

In five and a half years, the ColdFlux project under the IARPA SuperTools program pushed the boundaries of digital and analog superconductor electronic design automation (S-EDA) tools. The SuperTools program demanded significant beyond-state-of-the-art deliverables in four main areas: RTL synthesis, architectures, and verification; analog design and layout synthesis; physical design and test; and technology CAD and cell library design. Through the work of academic groups scattered over four continents, the ColdFlux effort forged into a powerful set of open-source and commercial S-EDA tools unlike any before, rivaled only by a commercial toolchain from Synopsys under the same SuperTools umbrella. We present an overview of the tools from where we started to the eventual project deliverables. These include powerful simulation and extraction engines, magnetic field and flux trapping analysis, advanced clocking methods, multi-chip interface extraction and verification, unified multi-layer design-rule compliant track blocks for automated place and route of both rapid single flux quantum (RSFQ) and adiabatic quantum-flux-parametron (AQFP) cells, models and tools for validation and test, multi-bit single flux quantum (SFQ) cells, architecture innovations for full CPU designs and more. Comprehensive cell libraries and a process design kit (PDK) were developed with the ColdFlux tools. The AQFP cell library features a logically rich collection of 80+ cells, including 3- and 5-input logic gates, signal-driving boosters, and refined RSFQ-to-AQFP interfaces, while the RSFQ library has 30+ cells. Finally, we discuss how the full toolchain enables and enhances the superconductor IC design process.

IEEE Transactions on Applied Superconductivity•Aug 18, 2023•25 citations

The development and characterisation of a parameterised RSFQ cell library for layout synthesis

Lieze Schindler

ENGLISH ABSTRACT: Superconductor electronics have shown great promise for interfacing quantum computers to conventional electronics. Several superconductor logic families show potential, \nbut one particular logic family has shown reliable results: Rapid Single Flux Quantum \n(RSFQ). RSFQ logic implements single SFQ pulses to represent binary data instead of \nthe traditional voltage levels used by semiconductor electronics. RSFQ is so ubiquitous \nto superconductor digital systems that it serves as the entry to superconductor digital \ndesign. Presently, however, the field of RSFQ logic cell design is very exclusive with \na small number of physicists and engineers able to design efficient RSFQ cells. This \nresearch aims to provide a formalised RSFQ design methodology with education quality \ncircuit theory. Several RSFQ examples are designed, analysed and improved using phasebased circuit equations. Similar to Kirchhoff’s current and voltage laws, these phase-based \nequations can be used to accurately determine the current distribution within a cell. The \ndesign methodology for multi-state RSFQ cells is also discussed. Multiple simulation \nmethods confirming cell functionality and operating margins are also presented. The \neducation regarding the design, analysis and implementation of RSFQ cells is vastly \nexpanded through this research which can accelerate the field of quantum circuit design. \nRSFQ cells can be connected using a non-storing inductive loop, Josephson transmission lines (JTLs) or, alternatively, superconductor passive transmission lines (PTLs) \nto bridge longer distances. Signal transmission of SFQ pulses through PTLs and JTLs \nare analysed and compared. Impedance matching for PTL interconnects to reduce pulse \nreflection is also investigated. \nAn example of a portable RSFQ cell library for layout synthesis is developed as \npart of the IARPA SuperTools program. The challenges of RSFQ cell layouts for the \nMassachusetts Institute of Technology Lincoln Laboratory (MIT-LL) SFQ5ee fabrication \nprocess are discussed. A methodology for establishing a standardised cell layout synthesis \nis presented. The research contributes to the design and characterisation of track routing \narchitecture for RSFQ on a multilayer fabrication process. \nLastly, methods to test fabricated RSFQ circuits are presented. This includes testing \nthe functionality of individual cells, as well as measuring throughput delays. As the SFQ \npulses are only a few picoseconds wide, it is not possible to observe these pulses using \nconventional measuring equipment. The fabricated tests must therefore be designed in \nsuch a way that it is possible to extract meaningful measurements.

•Mar 1, 2021•3 citations

Design and implementation of a RSFQ superconductive digital electronics cell library

Rodwell S. Bakolo

ENGLISH ABSTRACT: Rapid Single Flux Quantum (RSFQ) cells are key in the design of complex and applicable RSFQ electronic circuits. These cells are low-level circuit elements that are used repeatedly to build larger, applicable RSFQ circuitry. Making these cells simple to layout and manufacture, but reliable for extensive use demands a careful development process for RSFQ cells. Cell functionality is verified through simulations, thereafter the cell is laid out in special software packages. Inductance of on-chip superconductor structures is extracted through careful modelling with numerical field solver software. A cell library has been developed by incorporating existing or published cells after further analysis and optimization, as well as developing new cells. Cells that have been adapted into the library include the Josephson transmission line (JTL), Splitter, Merger, D-Flip Flop (DFF), T-Flip Flop (TFF), NOT, AND, OR and XOR, DC-SFQ and SFQ-DC and PTL Driver and Receivers. New cells include NOR, NAND and XNOR. The cells were designed for the IPHT’s RSFQ1D 1kA/cmª and Hypres’ 4.5kA/cmª processes. The cells in the library have good bias current operating margins obtained through simulations (> ±26%). All cells have all the parameters listed in the thesis including extracted inductance values. In order to have a complete and verified RSFQ cell library, cells have been sent for fabrication at IPHT and Hypres facilities. These cells can now be tested on-chip, in the laboratory, to establish functionality and practical bias current margins. All test signal patterns and bias currents required for testing are defined to allow co-workers or collaborators to test the cells.

•Dec 1, 2011•1 citation

Demonstration of Interface Circuits for Adiabatic Quantum-Flux-Parametron Cell Library Using an Eight-Metal Layer Superconductor Process

Yuki Hironaka, Sukanya Sagarika Meher, Christopher Lawrence Ayala +7 more

In this paper, we designed and demonstrated interface circuits between AQFP (adiabatic quantum-flux-parametron) and RSFQ (rapid single-flux-quantum) circuits according to the established AQFP and RSFQ cell libraries using the MIT LL SFQ5ee process. The principles of these interfaces are based on ones that were previously designed and demonstrated using a four-metal-layer superconductor process. The AQFP-to-RSFQ interface is based on an RSFQ comparator, where an output current from an AQFP buffer is converted to an SFQ pulse output. The RSFQ-to-AQFP interface is based on an RSFQ D flip-flop, where the internal state of the D flip-flop is read out by an AQFP buffer. Thanks to the eight-metal-layer process, the interfaces can be designed with reduced circuit area compared to original designs with the four-metal-layer process. We designed, fabricated, and tested an AQFP-RSFQ hybrid multiplexer test circuit as an example of utilization of the interfaces, which results in correct operation with reasonably wide bias margins in low-frequency tests.

IEEE Transactions on Applied Superconductivity•Feb 16, 2023•4 citations

Electronic Design Automation tools for superconducting circuits

Coenrad Johann Fourie

Abstract Superconducting integrated circuits have long been completely handcrafted or at best designed with a loose collection of tools that require manual manipulation of data and design transfer between tools. Electronic Design Automation (EDA) software development requires significant investment of resources to track the evolution of integrated circuit fabrication processes, which has only been possible commercially for highly successful semiconductor integrated circuit processes. The IARPA SuperTools project which started in 2017 is the largest known investment to date made in superconducting EDA tool development. SuperTools is divided into two main categories: high-level tools for the synthesis of digital logic circuits, clock networks and placed-and-routed layouts for systems such as processors with millions of logic gates; and physical-level tools for the design, simulation, optimisation, verification, layout and parameter extraction of devices and digital logic cells with the inclusion of fabrication process simulation. In this paper the modules developed for the ColdFlux project under SuperTools are discussed from device modelling to chip tape-out. Progress on parameter extraction tools is highlighted.

Journal of Physics Conference Series•Jul 1, 2020•14 citations

Rapid single-flux-quantum and adiabatic quantum-flux-parametron cell libraries using a 1 kA/cm2 niobium fabrication process

Taiki Yamae, Yuki Hironaka, Shuichi Nagasawa +3 more

Abstract Superconductor logic families can operate with small power dissipation and are thus suitable as building blocks for various computing systems. In some applications, superconductor logic circuits should be designed using Josephson junctions with low I c values ( I c : critical current). For instance, lowering I c values enables qubit interface circuits to operate with very small power dissipation at ~10 mK and stochastic electronics to easily induce stochastic operations. In this study, we develop the AIST 1 kA cm −2 Nb planarized process (1KP) with a minimum critical current of 10 µA, dedicated to the design of qubit interface circuits and stochastic electronics. We also develop rapid single-flux-quantum (RSFQ) and adiabatic quantum-flux-parametron (AQFP) cell libraries using the 1KP. The power dissipation of RSFQ logic using the 1KP can be reduced to 3.2% of that for conventional RSFQ logic by reducing both I c values and a bias voltage. Furthermore, the amount of supply currents for AQFP circuits using the 1KP can be reduced to ~40% of that for conventional AQFP circuits due to a large mutual inductance between AQFP gates and excitation lines, which results from a reduction in I c and an increase in inductances. We demonstrate RSFQ and AQFP circuits fabricated by the 1KP at 4.2 K. These results indicate that RSFQ and AQFP circuits using the 1KP have the potential to be used for the design of qubit interface circuits and stochastic electronics.

Scientific Reports•Nov 21, 2025•4 citations
The ColdFlux project, within the IARPA SuperTools program, aims to develop an open-source EDA tool suite for superconductor circuits, with focus on Rapid single flux quantum (RSFQ) and Adiabatic quantum-flux-parametron (AQFP) logic. The functionality of the ColdFlux tool suite is validated through the development of ready-to-use cell libraries. The process of establishing the open-source ColdFlux RSFQ cell library is documented, along with the set of EDA tools developed within the project required for each step. This includes the initial cell design using phase-based equations, circuit simulation, operating margin analysis, and cell parameter optimization. The row-based layout architecture for the RSFQ cell library is also presented. Several of the designed RSFQ cells are placed within test circuits and fabricated through the MIT-LL SFQ5ee fabrication process. We present the measured results for these test circuits and discuss design efficiency, potential improvements, and future work.
In five and a half years, the ColdFlux project under the IARPA SuperTools program pushed the boundaries of digital and analog superconductor electronic design automation (S-EDA) tools. The SuperTools program demanded significant beyond-state-of-the-art deliverables in four main areas: RTL synthesis, architectures, and verification; analog design and layout synthesis; physical design and test; and technology CAD and cell library design. Through the work of academic groups scattered over four continents, the ColdFlux effort forged into a powerful set of open-source and commercial S-EDA tools unlike any before, rivaled only by a commercial toolchain from Synopsys under the same SuperTools umbrella. We present an overview of the tools from where we started to the eventual project deliverables. These include powerful simulation and extraction engines, magnetic field and flux trapping analysis, advanced clocking methods, multi-chip interface extraction and verification, unified multi-layer design-rule compliant track blocks for automated place and route of both rapid single flux quantum (RSFQ) and adiabatic quantum-flux-parametron (AQFP) cells, models and tools for validation and test, multi-bit single flux quantum (SFQ) cells, architecture innovations for full CPU designs and more. Comprehensive cell libraries and a process design kit (PDK) were developed with the ColdFlux tools. The AQFP cell library features a logically rich collection of 80+ cells, including 3- and 5-input logic gates, signal-driving boosters, and refined RSFQ-to-AQFP interfaces, while the RSFQ library has 30+ cells. Finally, we discuss how the full toolchain enables and enhances the superconductor IC design process.
ENGLISH ABSTRACT: Superconductor electronics have shown great promise for interfacing quantum computers to conventional electronics. Several superconductor logic families show potential, \nbut one particular logic family has shown reliable results: Rapid Single Flux Quantum \n(RSFQ). RSFQ logic implements single SFQ pulses to represent binary data instead of \nthe traditional voltage levels used by semiconductor electronics. RSFQ is so ubiquitous \nto superconductor digital systems that it serves as the entry to superconductor digital \ndesign. Presently, however, the field of RSFQ logic cell design is very exclusive with \na small number of physicists and engineers able to design efficient RSFQ cells. This \nresearch aims to provide a formalised RSFQ design methodology with education quality \ncircuit theory. Several RSFQ examples are designed, analysed and improved using phasebased circuit equations. Similar to Kirchhoff’s current and voltage laws, these phase-based \nequations can be used to accurately determine the current distribution within a cell. The \ndesign methodology for multi-state RSFQ cells is also discussed. Multiple simulation \nmethods confirming cell functionality and operating margins are also presented. The \neducation regarding the design, analysis and implementation of RSFQ cells is vastly \nexpanded through this research which can accelerate the field of quantum circuit design. \nRSFQ cells can be connected using a non-storing inductive loop, Josephson transmission lines (JTLs) or, alternatively, superconductor passive transmission lines (PTLs) \nto bridge longer distances. Signal transmission of SFQ pulses through PTLs and JTLs \nare analysed and compared. Impedance matching for PTL interconnects to reduce pulse \nreflection is also investigated. \nAn example of a portable RSFQ cell library for layout synthesis is developed as \npart of the IARPA SuperTools program. The challenges of RSFQ cell layouts for the \nMassachusetts Institute of Technology Lincoln Laboratory (MIT-LL) SFQ5ee fabrication \nprocess are discussed. A methodology for establishing a standardised cell layout synthesis \nis presented. The research contributes to the design and characterisation of track routing \narchitecture for RSFQ on a multilayer fabrication process. \nLastly, methods to test fabricated RSFQ circuits are presented. This includes testing \nthe functionality of individual cells, as well as measuring throughput delays. As the SFQ \npulses are only a few picoseconds wide, it is not possible to observe these pulses using \nconventional measuring equipment. The fabricated tests must therefore be designed in \nsuch a way that it is possible to extract meaningful measurements.
ENGLISH ABSTRACT: Rapid Single Flux Quantum (RSFQ) cells are key in the design of complex and applicable RSFQ electronic circuits. These cells are low-level circuit elements that are used repeatedly to build larger, applicable RSFQ circuitry. Making these cells simple to layout and manufacture, but reliable for extensive use demands a careful development process for RSFQ cells. Cell functionality is verified through simulations, thereafter the cell is laid out in special software packages. Inductance of on-chip superconductor structures is extracted through careful modelling with numerical field solver software. A cell library has been developed by incorporating existing or published cells after further analysis and optimization, as well as developing new cells. Cells that have been adapted into the library include the Josephson transmission line (JTL), Splitter, Merger, D-Flip Flop (DFF), T-Flip Flop (TFF), NOT, AND, OR and XOR, DC-SFQ and SFQ-DC and PTL Driver and Receivers. New cells include NOR, NAND and XNOR. The cells were designed for the IPHT’s RSFQ1D 1kA/cmª and Hypres’ 4.5kA/cmª processes. The cells in the library have good bias current operating margins obtained through simulations (> ±26%). All cells have all the parameters listed in the thesis including extracted inductance values. In order to have a complete and verified RSFQ cell library, cells have been sent for fabrication at IPHT and Hypres facilities. These cells can now be tested on-chip, in the laboratory, to establish functionality and practical bias current margins. All test signal patterns and bias currents required for testing are defined to allow co-workers or collaborators to test the cells.
In this paper, we designed and demonstrated interface circuits between AQFP (adiabatic quantum-flux-parametron) and RSFQ (rapid single-flux-quantum) circuits according to the established AQFP and RSFQ cell libraries using the MIT LL SFQ5ee process. The principles of these interfaces are based on ones that were previously designed and demonstrated using a four-metal-layer superconductor process. The AQFP-to-RSFQ interface is based on an RSFQ comparator, where an output current from an AQFP buffer is converted to an SFQ pulse output. The RSFQ-to-AQFP interface is based on an RSFQ D flip-flop, where the internal state of the D flip-flop is read out by an AQFP buffer. Thanks to the eight-metal-layer process, the interfaces can be designed with reduced circuit area compared to original designs with the four-metal-layer process. We designed, fabricated, and tested an AQFP-RSFQ hybrid multiplexer test circuit as an example of utilization of the interfaces, which results in correct operation with reasonably wide bias margins in low-frequency tests.
Abstract Superconducting integrated circuits have long been completely handcrafted or at best designed with a loose collection of tools that require manual manipulation of data and design transfer between tools. Electronic Design Automation (EDA) software development requires significant investment of resources to track the evolution of integrated circuit fabrication processes, which has only been possible commercially for highly successful semiconductor integrated circuit processes. The IARPA SuperTools project which started in 2017 is the largest known investment to date made in superconducting EDA tool development. SuperTools is divided into two main categories: high-level tools for the synthesis of digital logic circuits, clock networks and placed-and-routed layouts for systems such as processors with millions of logic gates; and physical-level tools for the design, simulation, optimisation, verification, layout and parameter extraction of devices and digital logic cells with the inclusion of fabrication process simulation. In this paper the modules developed for the ColdFlux project under SuperTools are discussed from device modelling to chip tape-out. Progress on parameter extraction tools is highlighted.
Abstract Superconductor logic families can operate with small power dissipation and are thus suitable as building blocks for various computing systems. In some applications, superconductor logic circuits should be designed using Josephson junctions with low I c values ( I c : critical current). For instance, lowering I c values enables qubit interface circuits to operate with very small power dissipation at ~10 mK and stochastic electronics to easily induce stochastic operations. In this study, we develop the AIST 1 kA cm −2 Nb planarized process (1KP) with a minimum critical current of 10 µA, dedicated to the design of qubit interface circuits and stochastic electronics. We also develop rapid single-flux-quantum (RSFQ) and adiabatic quantum-flux-parametron (AQFP) cell libraries using the 1KP. The power dissipation of RSFQ logic using the 1KP can be reduced to 3.2% of that for conventional RSFQ logic by reducing both I c values and a bias voltage. Furthermore, the amount of supply currents for AQFP circuits using the 1KP can be reduced to ~40% of that for conventional AQFP circuits due to a large mutual inductance between AQFP gates and excitation lines, which results from a reduction in I c and an increase in inductances. We demonstrate RSFQ and AQFP circuits fabricated by the 1KP at 4.2 K. These results indicate that RSFQ and AQFP circuits using the 1KP have the potential to be used for the design of qubit interface circuits and stochastic electronics.