Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Optical Technology

Design and performance analysis of a deterministic iSWAP gate using a resonator as a coupler

Amit Kumar Sharma, Ritu Sharma

Published Nov 1, 2021• 0 citations
Publisher

Abstract

In this paper, quantum process tomography of the designed photonic-qubit-based deterministic iSWAP gate has been done and compared with the ideal iSWAP gate. The gate is designed and simulated using a resonator as a coupler. The performance (fidelity and concurrence) of the designed iSWAP gate has been analytically investigated. The effect of cavity parameters (coupling strength and cavity mode decay rate) on performance of the designed iSWAP gate has been observed. A maximum fidelity of 47.06% is obtained at a coupling strength of 0.02 and cavity mode decay rate of 0.0005, and a maximum concurrence of 0.474 is obtained at a coupling strength of 0.02 and cavity mode decay rate of 0. The research work reported in this paper can be used for further investigation and implementation of quantum information processing systems.

DOI
10.1364/jot.88.000666

Related papers

Performance analysis of all optical-based quantum internet circuits

Amit Kumar Sharma, Ritu Sharma, Shishir Kumar Sharma

Abstract A Quantum dot implanted within double-sided optical microcavity is explained and established as a critical component for all optical-based quantum internets. Due to the duality as the photonic quantum transistor and gate, the QD cavity system presents a sturdy base for the future photonic quantum network. With the help of the analytical investigation and review presented in this paper, a quantum dot cavity unit can be developed for implementing deterministic quantum gates and transistors. The maximum fidelity observed for quantum diode, router, and storage is 95.24%, 62.06%, and 90.42% without considering a noisy environment, respectively, and 62.12%, 60.36%, and 43.66% under a noisy environment, respectively. Fidelity is also calculated with varying coupling conditions (strong and weak coupling), and optimized cavity parameters are calculated. The paper also reports the work done by various researchers till date.

Journal of Computational Electronics•Aug 9, 2022•1 citation

Cavity QED photons for quantum information processing

Moteb M. Alqahtani, Mark S. Everitt, B. M. Garraway

Abstract Based on a cavity QED framework, we theoretically describe a universal set of logic gates which are implemented by passing a multi-level atom initially in its ground state through a multi-mode cavity. The qubits are encoded on the cavity modes and the atom plays the role of an ancilla which will not be entangled with the final result of a gate operation. We apply the multiphoton resonance theory of Shore to develop effective two- and three-level Hamiltonians, so that the proper values for detunings, coupling coefficients, and interaction times for gate operations can be determined. This enables us to examine a faster iSWAP gate than our previous study and to examine numerically the effects of decoherence on both the iSWAP gate and our previously presented Fredkin gate which used the same multi-mode approach. We also present results that show how conditional measurements of the ancilla atom can improve gate fidelities in these cases.

Journal of Physics B Atomic Molecular and Optical Physics•Aug 19, 2022•9 citations

High-fidelity iSWAP gate with Double Transmon Coupler

Tarush Tiwari, Sudhir K. Sahu, Guilhem Ribeill +6 more

Entangling operations are at the heart of all approaches to quantum information processing. Parametric gates, in particular, offer a versatile solution to strongly couple off-resonant superconducting qubits with suppressed parasitic crosstalk to spectator qubits due to frequency-selective activation. In this work, we demonstrate a parametric iSWAP gate between two transmon qubits using the recently developed double transmon coupler (DTC). The DTC supports robust internally-defined cancellation point (``off'' state) for static interactions, while simultaneously mediating a fast parametric coupling between data qubits that can be deployed for high-fidelity two-qubit operations. We use robust phase estimation to calibrate non-commuting error terms in the parametric iSWAP gate, and achieve a 99.827% gate fidelity in 40ns without any numerical optimization. The circuit architecture and calibration techniques developed here are extensible to other gate implementations and qubit modalities, paving the way towards resource-efficient quantum information processing.

quant-pharXiv:2604.27080•May 1, 2026•3 citations

Multi-Mode Bus Coupling Architecture of Superconducting Quantum Processor

Changhao Zhao, Yongcheng He, Geng Xiao +4 more

Abstract Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, novel engineering designs are also proposed featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. In this work, multi-mode bus coupling architecture is proposed, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Application of multi-mode bus coupler can help improve iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.

Chinese Physics Letters•Dec 6, 2022•4 citations

Design and performance analysis of deterministic iSWAP gate using a resonator as coupler

ÔÈÇÈ×ÅÑÊÀß ÎÏÒÈÊÀÈíòåðôåðåíöèÿ ëîêà ëèçîâà ííûõ ïîâåðõíîñòíûõ ïëà çìîí-ïîëÿðèòîíîâ è îáðà çîâà íèå íà íîðåøåòîê ðåëüåôà Ìà êèí Â.Ñ., Ìà êèí Ð.Ñ.ñòð. 3-8 Àííîòà öèÿ

Оптический журнал•Jan 1, 2021•0 citations

Designing and modeling of flexible and high-fidelity two-qubit gate and coupler for superconducting qubits

Zhongyi Jiang

Quantum computing holds great promise for both scientific discovery and commercial applications. Superconducting quantum systems have become one of the leading architectures for large-scale quantum computing. Towards realizing practical quantum computing, improving two-qubit gate fidelity is a crucial task. It is relevant for both near-term pre-fault-tolerant quantum computers and future fault-tolerant quantum computers. This dissertation aims to provide a comprehensive study of two-qubit gates in superconducting systems. The major focus is on improving gate fidelity via using different drive schemes and coupler designs. The dissertation contains two primary original contributions. First, a novel method for implementing continuous fSim gates is proposed and analyzed in detail. The fSim gate set is a family of gates that combines $i$SWAP gate and CPHASE gate into one gate with variable rotation angles and conditional phase. This gate set is particularly interesting for quantum simulation of fermionic systems. Second, a theoretical framework for multi-mode couplers is developed. A multi-mode coupler design is proposed to enable fully localized decoupling among qubits and independent control of qubit-qubit interactions in different excitation subspaces. An example of two qubits coupled by a two-mode coupler is studied in detail. Building on the fSim gate theory and multi-mode coupler design, several future research directions are outlined. Pulse-level algorithms for simulating electronic systems are discussed as a key application of fSim gates. A three-mode coupler architecture is further introduced. In addition, the importance of incorporating open-system dynamics for accurate modeling of coupler behavior and gate performance is emphasized. Finally, a unified framework for modeling superconducting quantum processors is proposed, providing a systematic way to compare gate fidelities across theoretical approaches and ultimately guide improvements in quantum hardware performance.

•Jan 1, 2026•0 citations
In this paper, quantum process tomography of the designed photonic-qubit-based deterministic iSWAP gate has been done and compared with the ideal iSWAP gate. The gate is designed and simulated using a resonator as a coupler. The performance (fidelity and concurrence) of the designed iSWAP gate has been analytically investigated. The effect of cavity parameters (coupling strength and cavity mode decay rate) on performance of the designed iSWAP gate has been observed. A maximum fidelity of 47.06% is obtained at a coupling strength of 0.02 and cavity mode decay rate of 0.0005, and a maximum concurrence of 0.474 is obtained at a coupling strength of 0.02 and cavity mode decay rate of 0. The research work reported in this paper can be used for further investigation and implementation of quantum information processing systems.
Abstract A Quantum dot implanted within double-sided optical microcavity is explained and established as a critical component for all optical-based quantum internets. Due to the duality as the photonic quantum transistor and gate, the QD cavity system presents a sturdy base for the future photonic quantum network. With the help of the analytical investigation and review presented in this paper, a quantum dot cavity unit can be developed for implementing deterministic quantum gates and transistors. The maximum fidelity observed for quantum diode, router, and storage is 95.24%, 62.06%, and 90.42% without considering a noisy environment, respectively, and 62.12%, 60.36%, and 43.66% under a noisy environment, respectively. Fidelity is also calculated with varying coupling conditions (strong and weak coupling), and optimized cavity parameters are calculated. The paper also reports the work done by various researchers till date.
Abstract Based on a cavity QED framework, we theoretically describe a universal set of logic gates which are implemented by passing a multi-level atom initially in its ground state through a multi-mode cavity. The qubits are encoded on the cavity modes and the atom plays the role of an ancilla which will not be entangled with the final result of a gate operation. We apply the multiphoton resonance theory of Shore to develop effective two- and three-level Hamiltonians, so that the proper values for detunings, coupling coefficients, and interaction times for gate operations can be determined. This enables us to examine a faster iSWAP gate than our previous study and to examine numerically the effects of decoherence on both the iSWAP gate and our previously presented Fredkin gate which used the same multi-mode approach. We also present results that show how conditional measurements of the ancilla atom can improve gate fidelities in these cases.
Entangling operations are at the heart of all approaches to quantum information processing. Parametric gates, in particular, offer a versatile solution to strongly couple off-resonant superconducting qubits with suppressed parasitic crosstalk to spectator qubits due to frequency-selective activation. In this work, we demonstrate a parametric iSWAP gate between two transmon qubits using the recently developed double transmon coupler (DTC). The DTC supports robust internally-defined cancellation point (``off'' state) for static interactions, while simultaneously mediating a fast parametric coupling between data qubits that can be deployed for high-fidelity two-qubit operations. We use robust phase estimation to calibrate non-commuting error terms in the parametric iSWAP gate, and achieve a 99.827% gate fidelity in 40ns without any numerical optimization. The circuit architecture and calibration techniques developed here are extensible to other gate implementations and qubit modalities, paving the way towards resource-efficient quantum information processing.
Abstract Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, novel engineering designs are also proposed featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. In this work, multi-mode bus coupling architecture is proposed, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Application of multi-mode bus coupler can help improve iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.
ÔÈÇÈ×ÅÑÊÀß ÎÏÒÈÊÀÈíòåðôåðåíöèÿ ëîêà ëèçîâà ííûõ ïîâåðõíîñòíûõ ïëà çìîí-ïîëÿðèòîíîâ è îáðà çîâà íèå íà íîðåøåòîê ðåëüåôà Ìà êèí Â.Ñ., Ìà êèí Ð.Ñ.ñòð. 3-8 Àííîòà öèÿ
Quantum computing holds great promise for both scientific discovery and commercial applications. Superconducting quantum systems have become one of the leading architectures for large-scale quantum computing. Towards realizing practical quantum computing, improving two-qubit gate fidelity is a crucial task. It is relevant for both near-term pre-fault-tolerant quantum computers and future fault-tolerant quantum computers. This dissertation aims to provide a comprehensive study of two-qubit gates in superconducting systems. The major focus is on improving gate fidelity via using different drive schemes and coupler designs. The dissertation contains two primary original contributions. First, a novel method for implementing continuous fSim gates is proposed and analyzed in detail. The fSim gate set is a family of gates that combines iiiSWAP gate and CPHASE gate into one gate with variable rotation angles and conditional phase. This gate set is particularly interesting for quantum simulation of fermionic systems. Second, a theoretical framework for multi-mode couplers is developed. A multi-mode coupler design is proposed to enable fully localized decoupling among qubits and independent control of qubit-qubit interactions in different excitation subspaces. An example of two qubits coupled by a two-mode coupler is studied in detail. Building on the fSim gate theory and multi-mode coupler design, several future research directions are outlined. Pulse-level algorithms for simulating electronic systems are discussed as a key application of fSim gates. A three-mode coupler architecture is further introduced. In addition, the importance of incorporating open-system dynamics for accurate modeling of coupler behavior and gate performance is emphasized. Finally, a unified framework for modeling superconducting quantum processors is proposed, providing a systematic way to compare gate fidelities across theoretical approaches and ultimately guide improvements in quantum hardware performance.