Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

High-Stability Rb Optical Clock Based on Pulse-Modulated Broad-Spectrum Comb-Tooth Laser

Xiaolei Guan, Tiantian Shi, Jianxiang Miao, Tian Zhao, Jingbiao Chen

Published Jul 7, 2021• 0 citations
Publisher

Abstract

We have proposed a new scheme to realize the Rb optical clock using a pulse-modulated broad-spectrum multi-frequency laser. By applying a pulse-modulated signal to a 420 nm external cavity diode laser, a broad-spectrum comb-tooth laser with multiple frequency components is generated, which can interact with almost all the Rb atoms with different transverse velocities, so that more Rb atoms in the Rb cell can contribute to the frequency stabilization signal of the clock transition spectral line. The effective atomic number is expected to be improved by a factor of 102- 103, which will significantly improve the signal-to-noise ratio of spectrum, so as to optimize the frequency stability of Rb optical clock. The Rb optical frequency standard with high stability can be widely used in laser physics and precision measurement.

DOI
10.1109/eftf/ifcs52194.2021.9604345

Related papers

Compact 780-nm Rb optical clock

Zhendong Chen, Tianyu Liu, Ruoao Yang +9 more

We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.

arXiv:2501.01826•Physical Review Applied•Nov 24, 2025•6 citations

A Compact Rubidium Optical Clock Based on Modulation Transfer Spectrum

Zhendong Chen, Ruoao Yang, Yang Qiaohui +7 more

A compact rubidium optical clock is presented, incorporating an optical frequency standard, a fiber frequency comb, and associated control electronics. Modulation transfer spectroscopy, devoid of Doppler background and characterized by a high signal-to-noise ratio and sensitivity, is employed to lock the laser frequency to the hyperfine transitions of rubidium atomic lines. The clock exhibits a short-term stability of 4.10 × 10-13at a 1-second gate time, and the stability remains below 7.27 × 10-13up to 1000 seconds. These results offer a promising alternative approach for the development of portable optical clocks.

IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS)•Sep 22, 2024•0 citations

High-performance, compact optical standard

Zachary L. Newman, Vincent N. Maurice, Connor D. Fredrick +6 more

We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an instability of 1.8 × 10 − 13 τ − 1 / 2 for times less than 100 s and a flicker noise floor of 1 × 10 − 14 out to 6000 s. At long integration times, the instability is limited by variations in optical probe power and the ac Stark shift. The retrace was measured to 5.7 × 10 − 13 after 30 h of dormancy. Such a simple, yet high-performance optical standard could be suitable as an accurate realization of the meter or, if coupled with an optical frequency comb, as a compact atomic clock comparable to a hydrogen maser.

arXiv:2105.00610•Optics Letters•Aug 17, 2021•81 citations

A compact, high-performance laser-pumped rubidium atomic frequency standard

C. Affolderbach, G. Mileti, Fabien Droz

The paper presents the realisation of a high-performance vapour-cell atomic frequency standard demonstrator based on laser optical pumping. The development of such devices aims to fully exploit the advantages of using a narrow-band diode laser pump light source instead of the discharge lamps commonly used in Rb gas-cell clocks. These advantages include improved control over the pump light spectrum, higher selectivity of the optical pumping, and increased signal contrast, and thus show the potential for the realisation of Rb atomic clocks with improved short-term frequency stability.

European Quantum Electronics Conference (EQEC)•Jan 18, 2006•1 citation

Characteristics of wavelength standard system based on two-photon transition in 87Rb atoms

Peixuan Song, Yali Liu, Wei Li

Optical wavelength standards, based on the optical transitions of atoms or molecules, provide ultra-high precision frequency references and are the core technology of next-generation optical clocks. Their stability far exceeds that of the microwave frequency range, laying the foundation for precision metrology and cutting-edge scientific research. The wavelength standard device based on the 5S1/2-5D3/2 hyperfine level two-photon transition of 87Rb atoms exhibits significant advantages such as no Doppler broadening, high signal-to-noise ratio (SNR), and potential for miniaturization and chip integration, showing important application potential in precision measurement fields like rubidium atomic clocks and optical communication. In this paper, an experimental setup for two-photon transition was constructed using an external cavity diode laser (ECDL), achieving stable locking of the 778 nm wavelength by modulating the laser current. The effects of the temperature and length of the atomic vapor cell on the blue fluorescence linewidth, SNR, and frequency stability were systematically studied, further optimizing the system. By using an atomic vapor cell designed at Brewster's angle, optical reflection loss was effectively reduced, compensating for the impact of shortened optical path on frequency stability in miniaturized atomic vapor cells. This provides new research directions and performance enhancement solutions for the miniaturization and chip integration of two-photon transition systems. In the improved system, a Brewster-angle glass vapor cell with a length of 30 mm was used and heated to 110°C, achieving a linewidth of 1.69 MHz full width at half maximum (FWHM) and a SNR of 20 dB. The system demonstrated a instability of 9.86×10-11 over a 1-second averaging time and a minimum instability of 5.79×10-11 over a 5.7-second averaging time. This achievement provides key technological support for the practical application of the next generation of miniaturized optical atomic clocks, with the potential for widespread use in portable metrology equipment and space science through integrated design and noise suppression optimization in the future.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Cell-based stabilized laser sources and light-shifts in pulsed Rb atomic clocks

Nil Almat, William Moreno, Matthieu Pellaton +4 more

We report on a narrow-linewidth diode laser source emitting at 780 nm, based on frequency doubling from 1.56 μm, which is frequency stabilized on the D2 transition line of Rubidium (Rb). This compact laser source shows a frequency stability of 2·10-12at 1 s and-12for τ up to 104s. This laser source is evaluated in a modular four-laser setup to identify and locate the sources of instabilities. In view of the lasers' applications to vapor-cell Rb atomic clocks, we also studied the various light-shift coefficients in a pulsed optically-pumped Rb clock. Finally, we evaluate the impact of the frequency and intensity instabilities of the frequency-doubled optical sources on the clock stability.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2017•1 citation
We have proposed a new scheme to realize the Rb optical clock using a pulse-modulated broad-spectrum multi-frequency laser. By applying a pulse-modulated signal to a 420 nm external cavity diode laser, a broad-spectrum comb-tooth laser with multiple frequency components is generated, which can interact with almost all the Rb atoms with different transverse velocities, so that more Rb atoms in the Rb cell can contribute to the frequency stabilization signal of the clock transition spectral line. The effective atomic number is expected to be improved by a factor of 102- 103, which will significantly improve the signal-to-noise ratio of spectrum, so as to optimize the frequency stability of Rb optical clock. The Rb optical frequency standard with high stability can be widely used in laser physics and precision measurement.
We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.
A compact rubidium optical clock is presented, incorporating an optical frequency standard, a fiber frequency comb, and associated control electronics. Modulation transfer spectroscopy, devoid of Doppler background and characterized by a high signal-to-noise ratio and sensitivity, is employed to lock the laser frequency to the hyperfine transitions of rubidium atomic lines. The clock exhibits a short-term stability of 4.10 × 10-13at a 1-second gate time, and the stability remains below 7.27 × 10-13up to 1000 seconds. These results offer a promising alternative approach for the development of portable optical clocks.
We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an instability of 1.8 × 10 − 13 τ − 1 / 2 for times less than 100 s and a flicker noise floor of 1 × 10 − 14 out to 6000 s. At long integration times, the instability is limited by variations in optical probe power and the ac Stark shift. The retrace was measured to 5.7 × 10 − 13 after 30 h of dormancy. Such a simple, yet high-performance optical standard could be suitable as an accurate realization of the meter or, if coupled with an optical frequency comb, as a compact atomic clock comparable to a hydrogen maser.
The paper presents the realisation of a high-performance vapour-cell atomic frequency standard demonstrator based on laser optical pumping. The development of such devices aims to fully exploit the advantages of using a narrow-band diode laser pump light source instead of the discharge lamps commonly used in Rb gas-cell clocks. These advantages include improved control over the pump light spectrum, higher selectivity of the optical pumping, and increased signal contrast, and thus show the potential for the realisation of Rb atomic clocks with improved short-term frequency stability.
Optical wavelength standards, based on the optical transitions of atoms or molecules, provide ultra-high precision frequency references and are the core technology of next-generation optical clocks. Their stability far exceeds that of the microwave frequency range, laying the foundation for precision metrology and cutting-edge scientific research. The wavelength standard device based on the 5S1/2-5D3/2 hyperfine level two-photon transition of 87Rb atoms exhibits significant advantages such as no Doppler broadening, high signal-to-noise ratio (SNR), and potential for miniaturization and chip integration, showing important application potential in precision measurement fields like rubidium atomic clocks and optical communication. In this paper, an experimental setup for two-photon transition was constructed using an external cavity diode laser (ECDL), achieving stable locking of the 778 nm wavelength by modulating the laser current. The effects of the temperature and length of the atomic vapor cell on the blue fluorescence linewidth, SNR, and frequency stability were systematically studied, further optimizing the system. By using an atomic vapor cell designed at Brewster's angle, optical reflection loss was effectively reduced, compensating for the impact of shortened optical path on frequency stability in miniaturized atomic vapor cells. This provides new research directions and performance enhancement solutions for the miniaturization and chip integration of two-photon transition systems. In the improved system, a Brewster-angle glass vapor cell with a length of 30 mm was used and heated to 110°C, achieving a linewidth of 1.69 MHz full width at half maximum (FWHM) and a SNR of 20 dB. The system demonstrated a instability of 9.86×10-11 over a 1-second averaging time and a minimum instability of 5.79×10-11 over a 5.7-second averaging time. This achievement provides key technological support for the practical application of the next generation of miniaturized optical atomic clocks, with the potential for widespread use in portable metrology equipment and space science through integrated design and noise suppression optimization in the future.
We report on a narrow-linewidth diode laser source emitting at 780 nm, based on frequency doubling from 1.56 μm, which is frequency stabilized on the D2 transition line of Rubidium (Rb). This compact laser source shows a frequency stability of 2·10-12at 1 s and-12for τ up to 104s. This laser source is evaluated in a modular four-laser setup to identify and locate the sources of instabilities. In view of the lasers' applications to vapor-cell Rb atomic clocks, we also studied the various light-shift coefficients in a pulsed optically-pumped Rb clock. Finally, we evaluate the impact of the frequency and intensity instabilities of the frequency-doubled optical sources on the clock stability.