Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Low Distortion Arbitrary Radio Signal Sensing with a Quantum Sensor

Chen Zhang, Durga Bhaktavatsala Rao Dasari, Matthias Widmann, Jonas Meinel, Vadim Vorobyov, Polina V. Kapitanova, Elizaveta A. Nenasheva, Kazuo Torii Nakamura, Hitoshi Sumiya, Shinobu Onoda, Junichi Isoya, Jörg Wrachtrup

Published Nov 7, 2021• 0 citations
OpenAlex

Abstract

Quantum sensors are keeping the cutting-edge sensitivities in metrology. However, for high-sensitive measurements of arbitrary signals, limitations in linear dynamic range could introduce distortions when sensing the frequency, magnitude and phase of unknown signals. Here, we overcome these limitations with advanced sensing protocol that combines quantum phase-sensitive detection with heterodyne readout. We present theoretical and experimental investigations using nitrogen-vacancy centers in diamond, showing the ability to sense radio signals with a 98 dB linear dynamic range, a 31 pT/Hz$^{1/2}$ sensitivity, and arbitrary frequency resolution. Further, we use the sensor as a quantum radio receiver to show the capability in detecting audio signals (melody piece, speech) with high fidelity. The methods developed here could broaden the horizon for quantum sensors towards applications in telecommunication, where high-fidelity and low-distortion at multiple frequency bands within small sensing volumes are required.

Related papers

Quantum-assisted distortion-free audio signal sensing

Chen Zhang, Durga Bhaktavatsala Rao Dasari, Matthias Widmann +9 more

Quantum sensors are known for their high sensitivity in sensing applications. However, this sensitivity often comes with severe restrictions on other parameters which are also important. Examples are that in measurements of arbitrary signals, limitation in linear dynamic range could introduce distortions in magnitude and phase of the signal. High frequency resolution is another important feature for reconstructing unknown signals. Here, we demonstrate a distortion-free quantum sensing protocol that combines a quantum phase-sensitive detection with heterodyne readout. We present theoretical and experimental investigations using nitrogen-vacancy centers in diamond, showing the capability of reconstructing audio frequency signals with an extended linear dynamic range and high frequency resolution. Melody and speech based signals are used for demonstrating the features. The methods could broaden the horizon for quantum sensors towards applications, e.g. telecommunication in challenging environment, where low-distortion measurements are required at multiple frequency bands within a limited volume.

arXiv:2111.04100•Nature Communications•Aug 8, 2022•18 citations

High bandwidth heterodyne sensing with bulk NV diamond

H. A. M. Taylor, J. P. Duff, L. B. Miller +4 more

Developing high performance portable sensors is of significant importance for both terrestrial and satellite communications, with quantum sensors offering potential advantages in sensitivity and bandwidth. The nitrogen vacancy center in diamond is a popular quantum sensing platform for its relative simplicity and wide range of acceptable operating conditions, but suffers a limited instantaneous bandwidth due to the narrow linewidth of the spin resonance. In this work, we first present a magnetic quantum sensing scheme utilizing heterodyne mixing with strong optical and microwave driving, achieving MHz-scale instantaneous bandwidth with a sensitivity of $548 \; \text{pT/}\sqrt{\text{Hz}}$ in an active diamond volume of $ 2.5\times 10^{-4} \; \text{mm}^3$ with $2 \times 10^{11}$ NV centers. We then demonstrate expansion of the sensing bandwidth by employing a strong magnetic gradient and many individually modulated microwave control fields, expanding the single resonance bandwidth to 48 MHz with a peak sensitivity of $8.5 \; \text{nT/}\sqrt{\text{Hz}}$.

quant-pharXiv:2610.39022•Physical Review Applied•Oct 30, 2026•1 citation

Sensing of Arbitrary-Frequency Fields Using a Quantum Mixer

Guoqing Wang, Yi-Xiang Liu, Jennifer M. Schloss +3 more

Quantum sensors such as spin defects in diamond have achieved excellent performance by combining high sensitivity with spatial resolution.Unfortunately, these sensors can only detect signal fields with frequency in a few accessible ranges, typically low frequencies up to the experimentally achievable control field amplitudes and a narrow window around the sensors' resonance frequency.Here, we develop and demonstrate a technique for sensing arbitrary-frequency signals by using the sensor qubit as a quantum frequency mixer, enabling a variety of sensing applications.The technique leverages nonlinear effects in periodically driven (Floquet) quantum systems to achieve quantum frequency mixing of the signal and an applied bias ac field.The frequency-mixed field can be detected using well-developed sensing techniques such as Rabi and CPMG with the only additional requirement of the bias field.We further show that the frequency mixing can distinguish vectorial components of an oscillating signal field, thus enabling arbitrary-frequency vector magnetometry.We experimentally demonstrate this protocol with nitrogenvacancy centers in diamond to sense a 150-MHz signal field, proving the versatility of the quantum mixer sensing technique.

Physical Review X•Jun 17, 2022•73 citations

Heterodyne sensing of microwaves with a quantum sensor

Jonas Meinel, Vadim Vorobyov, Boris V. Yavkin +5 more

Diamond quantum sensors are sensitive to weak microwave magnetic fields resonant to the spin transitions. However, the spectral resolution in such protocols is ultimately limited by the sensor lifetime. Here, we demonstrate a heterodyne detection method for microwaves (MW) leading to a lifetime independent spectral resolution in the GHz range. We reference the MW signal to a local oscillator by generating the initial superposition state from a coherent source. Experimentally, we achieve a spectral resolution below 1 Hz for a 4 GHz signal far below the sensor lifetime limit of kilohertz. Furthermore, we show control over the interaction of the MW-field with the two-level system by applying dressing fields, pulsed Mollow absorption and Floquet dynamics under strong longitudinal radio frequency drive. While pulsed Mollow absorption leads to improved sensitivity, the Floquet dynamics allow robust control, independent from the system's resonance frequency. Our work is important for future studies in sensing weak microwave signals in a wide frequency range with high spectral resolution.

arXiv:2008.10068•Nature Communications•May 12, 2021•88 citations

A novel demodulation method for transmission using nitrogen–vacancy-based solid-state quantum sensor

Ruixin Bai, Xinyue Zhu, Fan Yang +6 more

Diamond based quantum sensing is a fast-emerging field with both scientific and technological significance. The nitrogen–vacancy (NV) center, a crystal defect in diamond, has become a unique object for microwave sensing applications due to its excellent stability, long spin coherence time, and optical properties at ambient condition. In this work, we use diamond NV center as atomic receiver to demodulate on–off keying (OOK) signal transmitted in broad frequency range (2 GHz–14 GHz in a portable benchtop setup). We proposed a unique algorithm of voltage discrimination and demonstrated audio signal transceiving with fidelity above 99%. This diamond receiver is attached to the end of a tapered fiber, having all optic nature, which will find important applications in data transmission tasks under extreme conditions such as strong electromagnetic interference, high temperatures, and high corrosion.

Chinese Physics B•Feb 17, 2022•7 citations

High-resolution, Wide-frequency-range Magnetic Spectroscopy with Solid-state Spin Ensembles

Ronald Lee Walsworth, Zechuan Yin, Justin J. Welter +2 more

Abstract Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals (≲ 20 MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10 MHz to 4 GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4 GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error <1°. Compared to state-of-the-art NV-diamond techniques for narrowband magnetic spectroscopy, the QFM-CASR protocol greatly extends the detectable frequency range, enabling applications in high-frequency radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.

•Jan 24, 2025•0 citations
Quantum sensors are keeping the cutting-edge sensitivities in metrology. However, for high-sensitive measurements of arbitrary signals, limitations in linear dynamic range could introduce distortions when sensing the frequency, magnitude and phase of unknown signals. Here, we overcome these limitations with advanced sensing protocol that combines quantum phase-sensitive detection with heterodyne readout. We present theoretical and experimental investigations using nitrogen-vacancy centers in diamond, showing the ability to sense radio signals with a 98 dB linear dynamic range, a 31 pT/Hz1/2^{1/2}1/2 sensitivity, and arbitrary frequency resolution. Further, we use the sensor as a quantum radio receiver to show the capability in detecting audio signals (melody piece, speech) with high fidelity. The methods developed here could broaden the horizon for quantum sensors towards applications in telecommunication, where high-fidelity and low-distortion at multiple frequency bands within small sensing volumes are required.
Quantum sensors are known for their high sensitivity in sensing applications. However, this sensitivity often comes with severe restrictions on other parameters which are also important. Examples are that in measurements of arbitrary signals, limitation in linear dynamic range could introduce distortions in magnitude and phase of the signal. High frequency resolution is another important feature for reconstructing unknown signals. Here, we demonstrate a distortion-free quantum sensing protocol that combines a quantum phase-sensitive detection with heterodyne readout. We present theoretical and experimental investigations using nitrogen-vacancy centers in diamond, showing the capability of reconstructing audio frequency signals with an extended linear dynamic range and high frequency resolution. Melody and speech based signals are used for demonstrating the features. The methods could broaden the horizon for quantum sensors towards applications, e.g. telecommunication in challenging environment, where low-distortion measurements are required at multiple frequency bands within a limited volume.
Developing high performance portable sensors is of significant importance for both terrestrial and satellite communications, with quantum sensors offering potential advantages in sensitivity and bandwidth. The nitrogen vacancy center in diamond is a popular quantum sensing platform for its relative simplicity and wide range of acceptable operating conditions, but suffers a limited instantaneous bandwidth due to the narrow linewidth of the spin resonance. In this work, we first present a magnetic quantum sensing scheme utilizing heterodyne mixing with strong optical and microwave driving, achieving MHz-scale instantaneous bandwidth with a sensitivity of 548  pT/Hz548 \; \text{pT/}\sqrt{\text{Hz}}548pT/Hz​ in an active diamond volume of $ 2.5\times 10^{-4} \; \text{mm}^3$ with 2×10112 \times 10^{11}2×1011 NV centers. We then demonstrate expansion of the sensing bandwidth by employing a strong magnetic gradient and many individually modulated microwave control fields, expanding the single resonance bandwidth to 48 MHz with a peak sensitivity of 8.5  nT/Hz8.5 \; \text{nT/}\sqrt{\text{Hz}}8.5nT/Hz​.
Quantum sensors such as spin defects in diamond have achieved excellent performance by combining high sensitivity with spatial resolution.Unfortunately, these sensors can only detect signal fields with frequency in a few accessible ranges, typically low frequencies up to the experimentally achievable control field amplitudes and a narrow window around the sensors' resonance frequency.Here, we develop and demonstrate a technique for sensing arbitrary-frequency signals by using the sensor qubit as a quantum frequency mixer, enabling a variety of sensing applications.The technique leverages nonlinear effects in periodically driven (Floquet) quantum systems to achieve quantum frequency mixing of the signal and an applied bias ac field.The frequency-mixed field can be detected using well-developed sensing techniques such as Rabi and CPMG with the only additional requirement of the bias field.We further show that the frequency mixing can distinguish vectorial components of an oscillating signal field, thus enabling arbitrary-frequency vector magnetometry.We experimentally demonstrate this protocol with nitrogenvacancy centers in diamond to sense a 150-MHz signal field, proving the versatility of the quantum mixer sensing technique.
Diamond quantum sensors are sensitive to weak microwave magnetic fields resonant to the spin transitions. However, the spectral resolution in such protocols is ultimately limited by the sensor lifetime. Here, we demonstrate a heterodyne detection method for microwaves (MW) leading to a lifetime independent spectral resolution in the GHz range. We reference the MW signal to a local oscillator by generating the initial superposition state from a coherent source. Experimentally, we achieve a spectral resolution below 1 Hz for a 4 GHz signal far below the sensor lifetime limit of kilohertz. Furthermore, we show control over the interaction of the MW-field with the two-level system by applying dressing fields, pulsed Mollow absorption and Floquet dynamics under strong longitudinal radio frequency drive. While pulsed Mollow absorption leads to improved sensitivity, the Floquet dynamics allow robust control, independent from the system's resonance frequency. Our work is important for future studies in sensing weak microwave signals in a wide frequency range with high spectral resolution.
Diamond based quantum sensing is a fast-emerging field with both scientific and technological significance. The nitrogen–vacancy (NV) center, a crystal defect in diamond, has become a unique object for microwave sensing applications due to its excellent stability, long spin coherence time, and optical properties at ambient condition. In this work, we use diamond NV center as atomic receiver to demodulate on–off keying (OOK) signal transmitted in broad frequency range (2 GHz–14 GHz in a portable benchtop setup). We proposed a unique algorithm of voltage discrimination and demonstrated audio signal transceiving with fidelity above 99%. This diamond receiver is attached to the end of a tapered fiber, having all optic nature, which will find important applications in data transmission tasks under extreme conditions such as strong electromagnetic interference, high temperatures, and high corrosion.
Abstract Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals (≲ 20 MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10 MHz to 4 GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4 GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error <1°. Compared to state-of-the-art NV-diamond techniques for narrowband magnetic spectroscopy, the QFM-CASR protocol greatly extends the detectable frequency range, enabling applications in high-frequency radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.