Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EURASIP Journal on Wireless Communications and Networking

Reduced-complexity decoding implementation of QC-LDPC codes with modified shuffling

Alireza Hasani, Łukasz Łopaciński, Rolf Kraemer

Published Oct 9, 2021• 8 citations
Publisher

Abstract

Abstract Layered decoding (LD) facilitates a partially parallel architecture for performing belief propagation (BP) algorithm for decoding low-density parity-check (LDPC) codes. Such a schedule for LDPC codes has, in general, reduced implementation complexity compared to a fully parallel architecture and higher convergence rate compared to both serial and parallel architectures, regardless of the codeword length or code-rate. In this paper, we introduce a modified shuffling method which shuffles the rows of the parity-check matrix (PCM) of a quasi-cyclic LDPC (QC-LDPC) code, yielding a PCM in which each layer can be produced by the circulation of its above layer one symbol to the right. The proposed shuffling scheme additionally guarantees the columns of a layer of the shuffled PCM to be either zero weight or single weight. This condition has a key role in further decreasing LD complexity. We show that due to these two properties, the number of occupied look-up tables (LUTs) on a field programmable gate array (FPGA) reduces by about 93% and consumed on-chip power by nearly 80%, while the bit error rate (BER) performance is maintained. The only drawback of the shuffling is the degradation of decoding throughput, which is negligible for low values of $$E_b/N_0$$ Eb/N0 until the BER of 1e−6.

DOI
10.1186/s13638-021-02056-5

Related papers

A Modified Shuffling Method to Split the Critical Path Delay in Layered Decoding of QC-LDPC Codes

Alireza Hasani, Łukasz Łopaciński, Steffen Büchner +2 more

Layered (or Turbo) decoding of Low-Density Parity-Check (LDPC) codes is considered as a decoding schedule that facilitates partially parallel architectures for performing iterative algorithms based on belief propagation. It has, on one hand, reduced implementation complexity and memory overhead compared to fully parallel architectures and, on the other hand, higher convergence speed compared to both serial and parallel architectures. In this paper, we introduce a general form of shuffling of the parity-check matrix of quasi-cyclic LDPC (QC-LDPC) codes which can split the critical path delay in layered decoding and therefore improve throughput by allowing higher clock rates. We also reveal a valuable property of Latin squares QC-LDPC codes which makes them a good candidate for the proposed shuffling method. As a result of that property, no special caution of choosing offset values in the proposed generalized shuffling method is required.

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Sep 1, 2019•4 citations

Parity-Check Matrix Partitioning for Efficient Layered Decoding of QC-LDPC Codes

Teng Lu, Xuan He, Peng Kang +2 more

In this paper, we consider how to partition the parity-check matrices (PCMs) to reduce the hardware complexity and increase decoding throughput for the row layered decoding of quasi-cyclic low-density parity-check (QC-LDPC) codes. First, we formulate the PCM partitioning as an optimization problem, which targets to minimize the maximum column weight of each layer while maintaining a block cyclic shift property among different layers. As a result, we derive all the feasible solutions for the problem and propose a tight lower bound ωLBon the minimum possible maximum column weight to evaluate a solution. Second, we define a metric called layer distance to measure the data dependency between consecutive layers and further illustrate how to identify the solutions with desired layer distance from those achieving the minimum value of ωLB= 1, which is preferred to reduce computation delay. Next, we demonstrate that up-to-now, finding an optimal solution for the optimization problem with polynomial time complexity is unachievable. Therefore, both enumerative and greedy partition algorithms are proposed instead. After that, we modify the quasi-cyclic progressive edge-growth (QC-PEG) algorithm to directly construct PCMs that have a straightforward partition scheme to achieve ωLBor the desired layer distance. Simulation results showed that the constructed codes have better error correction performance and achieve less average number of iterations than the underlying 5G LDPC codes.

arXiv:2208.13022•IEEE Transactions on Communications•Mar 24, 2023•5 citations

Efficient Shuffled Decoder Architecture for Nonbinary Quasi-Cyclic LDPC Codes

Jun Ting Lin, Zhiyuan Yan

In this brief, a shuffled schedule (SS) of the min-max decoding algorithm is proposed for nonbinary low-density parity-check (LDPC) codes. To increase the throughput and reduce the memory requirement, a modified SS (MSS) with much simpler check node processing is also proposed, based on a new shuffled merge algorithm. Numerical simulations for three LDPC codes with different lengths and rates over GF(32) show: 1) both SS and MSS converge faster and have slightly better error performance than the flooding schedule, and 2) the degradation of the MSS in error performance as well as convergence rate is negligible. Finally, an efficient decoder architecture based on the MSS is proposed for quasi-cyclic LDPC codes. The proposed decoder architecture further enhances the decoding throughput with improved check and variable node processing units. The implementation results of an (837, 726) LDPC decoder over GF(32) demonstrate that the proposed architecture outperforms those in previous works.

IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Oct 18, 2012•20 citations

Low-Complexity High-Speed Decoder Design for Quasi-Cyclic LDPC Codes

Zhongfeng Wang, Zhiqiang Cui

This paper studies low-complexity high-speed decoder architectures for quasi-cyclic low density parity check (QC-LDPC) codes. Algorithmic transformation and architectural level optimization are incorporated to reduce the critical path. Enhanced partially parallel decoding architectures are proposed to linearly increase the throughput of conventional partially parallel decoders through introducing a small percentage of extra hardware. Based on the proposed architectures, a (8176, 7154) Euclidian geometry-based QC-LDPC code decoder is implemented on Xilinx field programmable gate array (FPGA) Virtex-II 6000, where an efficient nonuniform quantization scheme is employed to reduce the size of memories storing soft messages. FPGA implementation results show that the proposed decoder can achieve a maximum (source data) decoding throughput of 172 Mb/s at 15 iterations

IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Jan 1, 2007•154 citations

Parity Check Matrix Partitioning for Layered Decoding of QC-LDPC Codes

Teng Lu, Xuan He, Peng Kang +1 more

In this paper, we propose two algorithms to partition the parity check matrices (PCMs) for the layered decoding of quasi-cyclic low-density parity-check (QC-LDPC) codes, which targets to reduce the hardware complexity and computation delay. We formulate the optimization problem of PCM partitioning, and systematically propose the principle of partitioning to guarantee a block cyclic shift property for different decoding layers. After that, we develop both greedy and enumerative partitioning algorithms, aiming at minimizing the maximum column weight of each decoding layer. We further derive a tight lower bound for the minimum achievable maximum column weight, which can help to early terminate a searching process once the lower bound is achieved. Simulation results show that the proposed algorithms are generally capable of achieving the lower bound or differ by one.

IEEE Globecom Workshops (GC Wkshps)•Dec 1, 2021•1 citation

Lower-Complexity Layered Belief-Propagation Decoding of LDPC Codes

Yeimkuan Chang, Andres I. Vila Casado, Mau-Chung Frank Chang +1 more

The design of LDPC decoders with low complexity, high throughput, and good performance is a critical task. A well-known strategy is to design structured codes such as quasi- cyclic LDPC (QC-LDPC) that allow partially-parallel decoders. Sequential schedules, such as Layered Belief-Propagation (LBP), converge faster than the traditional flooding schedule while allowing parallel decoding of QC-LDPC codes. In this paper, we propose a novel low-complexity sequential schedule called Zigzag LBP (Z-LBP). Current LBP schedules do not allow partially- parallel architectures in the regime of high-rate codes with small- to-medium blocklengths. Our proposed algorithm can still be implemented in a partially-parallel manner in this regime. Z-LBP provides the same benefits as LBP including faster convergence speed and lower frame error rates than flooding.

International Conference on Communications•Jan 1, 2008•27 citations
Abstract Layered decoding (LD) facilitates a partially parallel architecture for performing belief propagation (BP) algorithm for decoding low-density parity-check (LDPC) codes. Such a schedule for LDPC codes has, in general, reduced implementation complexity compared to a fully parallel architecture and higher convergence rate compared to both serial and parallel architectures, regardless of the codeword length or code-rate. In this paper, we introduce a modified shuffling method which shuffles the rows of the parity-check matrix (PCM) of a quasi-cyclic LDPC (QC-LDPC) code, yielding a PCM in which each layer can be produced by the circulation of its above layer one symbol to the right. The proposed shuffling scheme additionally guarantees the columns of a layer of the shuffled PCM to be either zero weight or single weight. This condition has a key role in further decreasing LD complexity. We show that due to these two properties, the number of occupied look-up tables (LUTs) on a field programmable gate array (FPGA) reduces by about 93% and consumed on-chip power by nearly 80%, while the bit error rate (BER) performance is maintained. The only drawback of the shuffling is the degradation of decoding throughput, which is negligible for low values of Eb/N0E_b/N_0Eb​/N0​ Eb/N0 until the BER of 1e−6.
Layered (or Turbo) decoding of Low-Density Parity-Check (LDPC) codes is considered as a decoding schedule that facilitates partially parallel architectures for performing iterative algorithms based on belief propagation. It has, on one hand, reduced implementation complexity and memory overhead compared to fully parallel architectures and, on the other hand, higher convergence speed compared to both serial and parallel architectures. In this paper, we introduce a general form of shuffling of the parity-check matrix of quasi-cyclic LDPC (QC-LDPC) codes which can split the critical path delay in layered decoding and therefore improve throughput by allowing higher clock rates. We also reveal a valuable property of Latin squares QC-LDPC codes which makes them a good candidate for the proposed shuffling method. As a result of that property, no special caution of choosing offset values in the proposed generalized shuffling method is required.
In this paper, we consider how to partition the parity-check matrices (PCMs) to reduce the hardware complexity and increase decoding throughput for the row layered decoding of quasi-cyclic low-density parity-check (QC-LDPC) codes. First, we formulate the PCM partitioning as an optimization problem, which targets to minimize the maximum column weight of each layer while maintaining a block cyclic shift property among different layers. As a result, we derive all the feasible solutions for the problem and propose a tight lower bound ωLBon the minimum possible maximum column weight to evaluate a solution. Second, we define a metric called layer distance to measure the data dependency between consecutive layers and further illustrate how to identify the solutions with desired layer distance from those achieving the minimum value of ωLB= 1, which is preferred to reduce computation delay. Next, we demonstrate that up-to-now, finding an optimal solution for the optimization problem with polynomial time complexity is unachievable. Therefore, both enumerative and greedy partition algorithms are proposed instead. After that, we modify the quasi-cyclic progressive edge-growth (QC-PEG) algorithm to directly construct PCMs that have a straightforward partition scheme to achieve ωLBor the desired layer distance. Simulation results showed that the constructed codes have better error correction performance and achieve less average number of iterations than the underlying 5G LDPC codes.
In this brief, a shuffled schedule (SS) of the min-max decoding algorithm is proposed for nonbinary low-density parity-check (LDPC) codes. To increase the throughput and reduce the memory requirement, a modified SS (MSS) with much simpler check node processing is also proposed, based on a new shuffled merge algorithm. Numerical simulations for three LDPC codes with different lengths and rates over GF(32) show: 1) both SS and MSS converge faster and have slightly better error performance than the flooding schedule, and 2) the degradation of the MSS in error performance as well as convergence rate is negligible. Finally, an efficient decoder architecture based on the MSS is proposed for quasi-cyclic LDPC codes. The proposed decoder architecture further enhances the decoding throughput with improved check and variable node processing units. The implementation results of an (837, 726) LDPC decoder over GF(32) demonstrate that the proposed architecture outperforms those in previous works.
This paper studies low-complexity high-speed decoder architectures for quasi-cyclic low density parity check (QC-LDPC) codes. Algorithmic transformation and architectural level optimization are incorporated to reduce the critical path. Enhanced partially parallel decoding architectures are proposed to linearly increase the throughput of conventional partially parallel decoders through introducing a small percentage of extra hardware. Based on the proposed architectures, a (8176, 7154) Euclidian geometry-based QC-LDPC code decoder is implemented on Xilinx field programmable gate array (FPGA) Virtex-II 6000, where an efficient nonuniform quantization scheme is employed to reduce the size of memories storing soft messages. FPGA implementation results show that the proposed decoder can achieve a maximum (source data) decoding throughput of 172 Mb/s at 15 iterations
In this paper, we propose two algorithms to partition the parity check matrices (PCMs) for the layered decoding of quasi-cyclic low-density parity-check (QC-LDPC) codes, which targets to reduce the hardware complexity and computation delay. We formulate the optimization problem of PCM partitioning, and systematically propose the principle of partitioning to guarantee a block cyclic shift property for different decoding layers. After that, we develop both greedy and enumerative partitioning algorithms, aiming at minimizing the maximum column weight of each decoding layer. We further derive a tight lower bound for the minimum achievable maximum column weight, which can help to early terminate a searching process once the lower bound is achieved. Simulation results show that the proposed algorithms are generally capable of achieving the lower bound or differ by one.
The design of LDPC decoders with low complexity, high throughput, and good performance is a critical task. A well-known strategy is to design structured codes such as quasi- cyclic LDPC (QC-LDPC) that allow partially-parallel decoders. Sequential schedules, such as Layered Belief-Propagation (LBP), converge faster than the traditional flooding schedule while allowing parallel decoding of QC-LDPC codes. In this paper, we propose a novel low-complexity sequential schedule called Zigzag LBP (Z-LBP). Current LBP schedules do not allow partially- parallel architectures in the regime of high-rate codes with small- to-medium blocklengths. Our proposed algorithm can still be implemented in a partially-parallel manner in this regime. Z-LBP provides the same benefits as LBP including faster convergence speed and lower frame error rates than flooding.