Implementation of Microwave-Activated Conditional Quantum Operations in Superconducting Circuits
菖太郎 白井
There are two main approaches to correcting errors during quantum computation.The first one is redundantly embedding the degrees of freedom of a single qubit into multiple qubits.The second is known as bosonic codes, a method that embeds the information of a single qubit into a single multi-level system, such as a harmonic oscillator, using an auxiliary qubit.For the former, it is essential to implement quantum operations with low wiring costs and develop an architecture robust to parameter variations during fabrication steps.For the latter, it is necessary to establish a state manipulation method that does not degrade the coherence of the harmonic oscillator.Keeping these challenges in mind, we consulted on the research and obtained the following results.To achieve high-precision control in superconducting circuits, it is essential to establish a fabrication recipe for superconducting circuit elements with sufficiently long coherence times.We achieved state-of-the-art coherence times exceeding 400 µs of transmon qubits using high-temperature-grown Titanium Nitride superconducting thin films on silicon substrates.This result was achieved by optimizing the fabrication recipe and design of the superconducting circuit.Using a microwave-activated interaction with a fixed-frequency transmon qubit as a coupler, we developed a controlled-Z gate between transmon qubits.This method does not require frequency tunability of the qubits, and it maintains the advantages of fixed-frequency transmon qubits, such as long coherence time and low wiring cost, while minimizing the always-on residual ZZ interaction, which causes coherent errors, compared to conventional methods.This gate architecture offers higher design freedom and tolerance to parameter variations during fabrication steps.We implemented a conditional displacement gate between an auxiliary qubit and a resonator.Previously, in superconducting circuits, a weak dispersive coupling between the resonator and transmon qubit is primarily used as a resource interaction for the conditional displacement gate.Unfortunately, this valuable control resource can be a bit-flip error propagation channel during conditional gate operations.To address this issue, we implemented artificial spin-dependent forces (SDF) interaction between a superconducting resonator and a cubic transmon, offering second-order nonlinearity as a resource of SDF interaction.Using this interaction, we successfully prepared the superconducting resonator's squeezed vacuum and cat states.i
•Mar 21, 2024•0 citations