Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

A quantum state readout method based on a single ancilla qubit

Chen Ding, Tan Li, Shuo Zhang, Chu Guo, Wan‐Su Bao, Heliang Huang

Published Jan 1, 2021• 0 citations
Publisher

Abstract

Quantum state measurement is essential for reading-out a quantum computing outcome. Meanwhile, the readout results are always affected by the large noise of quantum measurements in physical implementation, which also hinders the large-scale expansion of quantum computing. In light of this, we present an indirect quantum state readout method based on a single ancilla qubit that can avoid the large noise of multiple-qubit measurements. The theoretical analysis and simulations indicate that our method is more robust against the measurement noise and promises to become a method of large-scale quantum error correction and high-fidelity quantum state readout.

DOI
10.7498/aps.68.20211066

Related papers

Robust readout of bosonic qubits in the dispersive coupling regime

Connor T. Hann, Salvatore S. Elder, Christopher S. Wang +3 more

High-fidelity qubit measurements play a crucial role in quantum computation, communication, and metrology. In recent experiments, it has been shown that readout fidelity can be improved by performing repeated quantum nondemolition (QND) readouts of a qubit's state through an ancilla. For a qubit encoded in a two-level system, the fidelity of such schemes is limited by the fact that a single error can destroy the information in the qubit. On the other hand, if a bosonic system is used, this fundamental limit can be overcome by utilizing higher levels such that a single error still leaves states distinguishable. In this work, we present a robust readout scheme which leverages both repeated QND readouts and higher-level encodings to asymptotically suppress the effects of mode relaxation and individual measurement infidelity. We calculate the measurement fidelity in terms of general experimental parameters, provide an information-theoretic description of the scheme, and describe its application to several encodings, including cat and binomial codes.

arXiv:1712.07785•Physical Review A•Aug 6, 2018•24 citations

Set, exchange, measure, repeat

Ian S. Osborne

Quantum Information Successful protocols for quantum information processing and quantum computation depend on the reliable storage and manipulation of the quantum state of a qubit. Qubits, however, are prone to errors because complete isolation from the environment is not possible. Methods for correcting these errors must also contend with the fact that direct measurement of a qubit destroys it. Xue et al. describe a repetitive quantum nondemolition method on a two-qubit system in which the state of the main qubit is mapped onto a second qubit that acts as an ancilla. Repeated measurement of the ancilla qubit allows the main qubit to be maintained and read out with higher fidelity. Such a protocol provides a route to robust quantum information processing in solid-state systems. Phys. Rev. X 10 , 021006 (2020).

Science•Jun 18, 2020•1 citation

Scaling Qubit Readout with Hardware Efficient Machine Learning Architectures

Satvik Maurya, Chaithanya Naik Mude, William D. Oliver +2 more

Reading a qubit is a fundamental operation in quantum computing. It translates quantum information into classical information enabling subsequent classification to assign the qubit states '0' or '1'. Unfortunately, qubit readout is one of the most error-prone and slowest operations on a superconducting quantum processor. On state-of-the-art superconducting quantum processors, readout errors can range from 1--10%. These errors occur for various reasons - crosstalk, spontaneous state transitions, and excitation caused by the readout pulse. The error-prone nature of readout has resulted in significant research to design better discriminators to achieve higher qubit-readout accuracies. High readout accuracy is essential for enabling high fidelity for near-term noisy quantum computers and error-corrected quantum computers of the future.

arXiv:2212.03895•Proceedings - International Symposium on Computer Architecture/Proceedings•Jun 16, 2023•46 citations

QUANTUM ERROR CORRECTION WITHOUT MEASUREMENT AND AN EFFICIENT RECOVERY OPERATION

Chi-Kwong Li, Mikio Nakahara, Yiu‐Tung Poon +2 more

1. IntroductionQuantum system is vulnerable to disturbance from the external environment, which leads todecoherence in the system. We have to overcome this difficulty to realize a working quanutumcomputer and a dependable quantum information processing. Quantum error correction (QEC)[1, 2, 3] is one of the most promising candidates for overcoming decoherence.QEC proposals to date are separated roughly into two classes, one employs extra ancilla qubitsfor error syndrome readout while the other, called operator quantum error correction (OQEC)employs a higher rank projection operator. However, the schemes have not been built in actualquantum computing or quantum information processing so far. This is dueto the following obstaclesinherent in these QECs; the syndrome must be read out by introducing ancilla qubits duringcomputing/information processing in the former case, while realization of a high-rank projectionoperator is physically challenging in the latter case.It was shown in [4] that for some quantum channels there exist different QECs in which nosyndrome measurements, no ancillas and no projection operators were required. Recovery operationand decoding operation are combined into a single unitary operation and the output state is a directproductof a decoded qubitstate and an ancilla state. Aqubit state isreproducedwithout recoveringthe codeword and, moreover, the projection operation is automatically built in our output state.The purpose of this paper is to extend the results in [4] to general quantum channels. We showthat for any quantum channel there is a unitary recovery operation, with which the output stateis a tensor product of decoded qubit state and an ancilla state. As a result, a decoding scheme canbe done by a unitary gate followed by a partial trace operation.The rest of the paper is organized as follows. We introduce the basic notions of OQEC andthen prove the main theorem in Section 2. We also give simple examples demonstrating our resultand a simplified proof of a theorem given in [2] illustrating that our recovery channel can be usedto do correction for many other channels related to ours. Section 3 is devoted to summary anddiscussions.

•Feb 8, 2011•1 citation

Oraqle: An Empirical Analysis of Qubit Readout and Discriminators in Quantum Error Correction

Emmanouil Giortamis, Aleksandra Świerkowska, Sandra Stankovic +3 more

Quantum error correction (QEC) is the most promising route toward fault-tolerant quantum computing and, thus, useful quantum computers. QEC operates as a continuous measure-decode-correct cycle: ancilla qubits are read out, a decoder infers errors from the resulting syndromes, and corrections are applied before the next round begins. Within this loop, readout occupies a uniquely critical role, as it is the sole source of ground truth available to the decoder. Yet readout is also the slowest and most error-prone operation in the stack, with characteristics that vary across qubits and drift over time; This complexity propagates directly to the classical control hardware, and in particular to the FPGA-hosted machine-learning (ML) discriminator that must classify each analog signal into a binary syndrome outcome. Despite this central role, QEC performance has not yet been studied in depth from the perspective of readout characteristics, readout length, and their co-design with an ML discriminator. We introduce Oraqle, an end-to-end benchmarking framework that evaluates qubit-state readout and its impact on QEC performance across real experimentally extracted qubit-state-readout datasets, state-of-the-art ML discriminators, multiple QEC codes, and hardware regimes spanning current to projected devices. Our study reveals three asymmetric findings: The measurement duration can be significantly reduced with nearly no penalty to the logical error rate; The discriminator complexity barely affects the QEC performance, as residual errors are written into device physics rather than the model; and the impact of qubit-state readout on the logical error rate is conditional on where the hardware sits in the QEC landscape, a window that widens as devices mature.

quant-pharXiv:2608.01939•Aug 4, 2026•0 citations

Single-copy entanglement purification: a robust approach for diverse noise sources

Sajede Harraz, Shuang Cong

Effectively managing various types of decoherence is crucial for leveraging entanglement in quantum information processing and quantum computing. In this paper, we propose purification circuits that deterministically produce a maximally entangled state from a single copy of an imperfect entangled pair affected by various noise sources. Unlike conventional methods, our approach eliminates the need for multiple copies of the entangled state, pre-purification operations, and imposes no restrictions on the initial entanglement fidelity of the imperfect pair. Our method utilizes ancilla qubits and CNOT gates to address errors from Pauli X and Z (bit flip and phase flip), as well as combinations of these errors that create general mixed entangled states and amplitude-damped entangled states. Our analysis shows that noisy CNOT gates impact fidelity minimally, with only the final two gates being critical. We validate our approach through mathematical analysis and practical implementation in Qiskit, demonstrating its effectiveness and robustness.

EPJ Quantum Technology•Apr 1, 2025•1 citation
Quantum state measurement is essential for reading-out a quantum computing outcome. Meanwhile, the readout results are always affected by the large noise of quantum measurements in physical implementation, which also hinders the large-scale expansion of quantum computing. In light of this, we present an indirect quantum state readout method based on a single ancilla qubit that can avoid the large noise of multiple-qubit measurements. The theoretical analysis and simulations indicate that our method is more robust against the measurement noise and promises to become a method of large-scale quantum error correction and high-fidelity quantum state readout.
High-fidelity qubit measurements play a crucial role in quantum computation, communication, and metrology. In recent experiments, it has been shown that readout fidelity can be improved by performing repeated quantum nondemolition (QND) readouts of a qubit's state through an ancilla. For a qubit encoded in a two-level system, the fidelity of such schemes is limited by the fact that a single error can destroy the information in the qubit. On the other hand, if a bosonic system is used, this fundamental limit can be overcome by utilizing higher levels such that a single error still leaves states distinguishable. In this work, we present a robust readout scheme which leverages both repeated QND readouts and higher-level encodings to asymptotically suppress the effects of mode relaxation and individual measurement infidelity. We calculate the measurement fidelity in terms of general experimental parameters, provide an information-theoretic description of the scheme, and describe its application to several encodings, including cat and binomial codes.
Quantum Information Successful protocols for quantum information processing and quantum computation depend on the reliable storage and manipulation of the quantum state of a qubit. Qubits, however, are prone to errors because complete isolation from the environment is not possible. Methods for correcting these errors must also contend with the fact that direct measurement of a qubit destroys it. Xue et al. describe a repetitive quantum nondemolition method on a two-qubit system in which the state of the main qubit is mapped onto a second qubit that acts as an ancilla. Repeated measurement of the ancilla qubit allows the main qubit to be maintained and read out with higher fidelity. Such a protocol provides a route to robust quantum information processing in solid-state systems. Phys. Rev. X 10 , 021006 (2020).
Reading a qubit is a fundamental operation in quantum computing. It translates quantum information into classical information enabling subsequent classification to assign the qubit states '0' or '1'. Unfortunately, qubit readout is one of the most error-prone and slowest operations on a superconducting quantum processor. On state-of-the-art superconducting quantum processors, readout errors can range from 1--10%. These errors occur for various reasons - crosstalk, spontaneous state transitions, and excitation caused by the readout pulse. The error-prone nature of readout has resulted in significant research to design better discriminators to achieve higher qubit-readout accuracies. High readout accuracy is essential for enabling high fidelity for near-term noisy quantum computers and error-corrected quantum computers of the future.
1. IntroductionQuantum system is vulnerable to disturbance from the external environment, which leads todecoherence in the system. We have to overcome this difficulty to realize a working quanutumcomputer and a dependable quantum information processing. Quantum error correction (QEC)[1, 2, 3] is one of the most promising candidates for overcoming decoherence.QEC proposals to date are separated roughly into two classes, one employs extra ancilla qubitsfor error syndrome readout while the other, called operator quantum error correction (OQEC)employs a higher rank projection operator. However, the schemes have not been built in actualquantum computing or quantum information processing so far. This is dueto the following obstaclesinherent in these QECs; the syndrome must be read out by introducing ancilla qubits duringcomputing/information processing in the former case, while realization of a high-rank projectionoperator is physically challenging in the latter case.It was shown in [4] that for some quantum channels there exist different QECs in which nosyndrome measurements, no ancillas and no projection operators were required. Recovery operationand decoding operation are combined into a single unitary operation and the output state is a directproductof a decoded qubitstate and an ancilla state. Aqubit state isreproducedwithout recoveringthe codeword and, moreover, the projection operation is automatically built in our output state.The purpose of this paper is to extend the results in [4] to general quantum channels. We showthat for any quantum channel there is a unitary recovery operation, with which the output stateis a tensor product of decoded qubit state and an ancilla state. As a result, a decoding scheme canbe done by a unitary gate followed by a partial trace operation.The rest of the paper is organized as follows. We introduce the basic notions of OQEC andthen prove the main theorem in Section 2. We also give simple examples demonstrating our resultand a simplified proof of a theorem given in [2] illustrating that our recovery channel can be usedto do correction for many other channels related to ours. Section 3 is devoted to summary anddiscussions.
Quantum error correction (QEC) is the most promising route toward fault-tolerant quantum computing and, thus, useful quantum computers. QEC operates as a continuous measure-decode-correct cycle: ancilla qubits are read out, a decoder infers errors from the resulting syndromes, and corrections are applied before the next round begins. Within this loop, readout occupies a uniquely critical role, as it is the sole source of ground truth available to the decoder. Yet readout is also the slowest and most error-prone operation in the stack, with characteristics that vary across qubits and drift over time; This complexity propagates directly to the classical control hardware, and in particular to the FPGA-hosted machine-learning (ML) discriminator that must classify each analog signal into a binary syndrome outcome. Despite this central role, QEC performance has not yet been studied in depth from the perspective of readout characteristics, readout length, and their co-design with an ML discriminator. We introduce Oraqle, an end-to-end benchmarking framework that evaluates qubit-state readout and its impact on QEC performance across real experimentally extracted qubit-state-readout datasets, state-of-the-art ML discriminators, multiple QEC codes, and hardware regimes spanning current to projected devices. Our study reveals three asymmetric findings: The measurement duration can be significantly reduced with nearly no penalty to the logical error rate; The discriminator complexity barely affects the QEC performance, as residual errors are written into device physics rather than the model; and the impact of qubit-state readout on the logical error rate is conditional on where the hardware sits in the QEC landscape, a window that widens as devices mature.
Effectively managing various types of decoherence is crucial for leveraging entanglement in quantum information processing and quantum computing. In this paper, we propose purification circuits that deterministically produce a maximally entangled state from a single copy of an imperfect entangled pair affected by various noise sources. Unlike conventional methods, our approach eliminates the need for multiple copies of the entangled state, pre-purification operations, and imposes no restrictions on the initial entanglement fidelity of the imperfect pair. Our method utilizes ancilla qubits and CNOT gates to address errors from Pauli X and Z (bit flip and phase flip), as well as combinations of these errors that create general mixed entangled states and amplitude-damped entangled states. Our analysis shows that noisy CNOT gates impact fidelity minimally, with only the final two gates being critical. We validate our approach through mathematical analysis and practical implementation in Qiskit, demonstrating its effectiveness and robustness.