Quantum algorithms offer efficient solutions to computational problems that are expensive to solve classically. Publicly available quantum computers, such as those provided by IBM, can now be used to run small quantum circuits that execute quantum algorithms. However, these quantum computers are highly prone to noise. Here, we introduce important concepts of quantum circuit noise and connectivity that must be addressed to obtain reliable results on quantum computers. We utilize several examples to show how noise scales with circuit depth. We present Simon's algorithm, a quantum algorithm for solving a computational problem of the same name, explain how to implement it in IBM's Qiskit platform, and compare the results of running it both on a noiseless simulator and on physical hardware subject to noise. We discuss the impact of Qiskit's transpiler, which adapts ideal quantum circuits for physical hardware with limited connectivity between qubits. We show that even circuits of only a few qubits can have their success rate significantly reduced by quantum noise unless specific measures are taken to minimize its impact.
Quantum algorithms offer efficient solutions to computational problems that are expensive to solve classically. Publicly available quantum computers, such as those provided by IBM, can now be used to run small quantum circuits that execute quantum algorithms. However, these quantum computers are highly prone to noise. Here, we introduce important concepts of quantum circuit noise and connectivity that must be addressed to obtain reliable results on quantum computers. We utilize several examples to show how noise scales with circuit depth. We present Simon's algorithm, a quantum algorithm for solving a computational problem of the same name, explain how to implement it in IBM's Qiskit platform, and compare the results of running it both on a noiseless simulator and on physical hardware subject to noise. We discuss the impact of Qiskit's transpiler, which adapts ideal quantum circuits for physical hardware with limited connectivity between qubits. We show that even circuits of only a few qubits can have their success rate significantly reduced by quantum noise unless specific measures are taken to minimize its impact.
This study examines how noise affects the reliability of quantum circuits through two complementary approaches: a controlled simulation using Qiskit Aer and an execution study on real IBM Quantum hardware. In simulation, five noise models (bit-flip, phase-flip, depolarizing, readout, and thermal-relaxation) were applied to a parameterized benchmark circuit across varying qubit counts, circuit depths, and noise strengths, producing 6,000 experimental observations. Success probability declined substantially as qubit count and circuit depth increased, with bit-flip, phase-flip, and depolarizing noise degrading performance far more severely (mean success probabilities of 0.597, 0.580, and 0.607) than readout noise (0.917) or thermal-relaxation noise (0.982). The same benchmark circuit was then executed on the ibm_marrakesh processor across 150 hardware runs (150,000 shots). Hardware performance remained consistently high (mean success probability 0.992), declining with qubit count (0.998 at two qubits to 0.986 at six) but showing little sensitivity to circuit depth. These results indicate that controlled noise mechanisms and real hardware degrade circuit performance through different dynamics, with implications for interpreting simulated noise models relative to physical device behavior.
Transpilation, particularly noise-aware optimization, is widely regarded as essential for maximizing the performance of quantum circuits on superconducting quantum computers. The common wisdom is that each circuit should be transpiled using up-to-date noise calibration data to optimize fidelity. In this work, we revisit the necessity of frequent noise-adaptive transpilation, conducting an in-depth empirical study across five IBM 127-qubit quantum computers and 16 diverse quantum algorithms. Our findings reveal novel and interesting insights: (1) noise-aware transpilation leads to a heavy concentration of workloads on a small subset of qubits, which increases output error variability; (2) using random mapping can mitigate this effect while maintaining comparable average fidelity; and (3) circuits compiled once with calibration data can be reliably reused across multiple calibration cycles and time periods without significant loss in fidelity. These results suggest that the classical overhead associated with daily, per-circuit noise-aware transpilation may not be justified. We propose lightweight alternatives that reduce this overhead without sacrificing fidelity – offering a path to more efficient and scalable quantum workflows.
Quantum computing promises to solve complex problems beyond the capabilities of classical computers. However, the practical implementation of quantum algorithms on Noisy Intermediate-Scale Quantum (NISQ) devices is significantly challenged by various noise sources that degrade computational fidelity. Transpilation—the process of converting high-level quantum circuits into optimized, hardware-specific instructions—plays a crucial role in mitigating these noise effects. In this paper, we present a comprehensive study on enhancing noise resilience in quantum algorithms through advanced transpilation techniques, evaluated using the SupermarQ benchmarking suite. By systematically analyzing the impact of different optimization levels in Qiskit’s transpiler on a diverse set of quantum algorithms, we demonstrate how specific transpilation strategies influence key performance metrics related to noise resilience. Our results show that higher optimization levels can improve metrics such as Liveness (LV) and Parallelism (PL), leading to more reliable quantum computations on NISQ hardware. This work contributes to the development of noise-adaptive transpilation methods that incorporate noise characteristics into the optimization process, ultimately enhancing the practical viability of quantum algorithms.
The development of complex circuits for practical applications in the current quantum computing ecosystem is based on basic primitives such as Bell states, which provide superposition, entanglement, and coherence. The range of domain-specific quantum applications has been greatly expanded by the availability of simulators and platforms such as IBM Quantum, which are supported by Qiskit. However, disparities between ideal simulator outputs and actual quantum processing unit (QPU) executions in the Noisy Intermediate-Scale Quantum (NISQ) era require the application of quantum error mitigation techniques. Limitations arise from hardware constraints in superconducting qubit systems and from the limited resources of classical simulators as quantum circuits grow. Quantum decoherence, which lowers gate fidelity and builds up at the circuit level with increasing depth, is specifically caused by material-induced flaws and interfaces. This creates a clear connection between circuit reliability, device performance, and material attributes. To address this, the current work uses both simulation and actual hardware on the IBM Sherbrooke 127-qubit processor to study three basic circuit classes over 4 to 10 qubits: the quantum Fourier transform, the Greenberger-Horne-Zeilinger state, and the W state. The study examines trade-offs between circuit complexity, noise robustness, and resource utilization by contrasting simulator and QPU results. The results imply that circuit fidelity can serve as an indirect probe of material-limited noise, opening the door to a framework for designing quantum circuits that accounts for both hardware and materials to achieve scalable quantum advantage.
This paper represents an accessible overview of quantum program development with IBM's Qiskit. Current quantum computers are still making a lot of mistakes since we are in the NISQ era, where noise is the main problem. Qiskit developers are assisted by means of which they can readily plan their circuits and then the versions which are to be run on the actual hardware are automatically created by the Transpiler. Simulation of the circuit along with the check of how the noise can change the result is done by Qiskit Aer before the program is sent to the real quantum computer. As noise is the cause of the major problem, there is also the provision of error-reduction methods like Readout Error Mitigation and Zero Noise Extrapolation (ZNE) in Qiskit to eliminate the noise. Hybrid algorithms such as VQE and QAOA are increasingly becoming instrumental in solving real problems in chemistry, finance, and machine learning, the paper says, too. The study sums up that Qiskit has become the most popular open-source platform that is leading the way to the next quantum computing era and making the quantum advantage feasible
Context: The main obstacle of quantum computing on its way to scalability is the noisy nature of current hardware. Various types of errors lead to incorrect computational results,and measures such as quantum error mitigation are needed to counteract these errors. Many error mitigation techniques require a thorough understanding of the noise and its impact on computations. Therefore, accurate noise models are indispensable to facilitate meaningful quantum computing in the near future. They also enable realistic simulations of quantum devices. Since these devices are currently limited and quantum computing is expensive, researchers typically rely on simulations for testing their algorithms.Objective: In this thesis, we aim to construct a realistic noise model for quantum computing and optimise its model parameters. The model construction should build on the underlying physical processes, and the number of parameters should scale well with the system size. We also address the evaluation and comparison of different noise models by benchmarks using quantum circuits specific to real-world applications. Finally, we aim to develop useful graphical representations of noise models based on the existing quantum circuit model.Method: We present a benchmarking framework for quantum computing noise models and evaluate it based on benchmarking quality attributes from the literature. Moreover, we construct a quantum computing noise model and develop a training procedure for its parameters. We analyse the parameters of the trained noise model and the impact ofdifferent types of errors on computations. We benchmark the noise model with the above approach and compare it to a noise model provided by IBM’s software development kit Qiskit. Finally, we develop an extension of the quantum circuit model to represent noise channels.Result: The benchmarks performed in this thesis show that our noise model predicts noisy hardware behaviour of IBM’s ibmq_manila quantum device equally well as the Qiskit model, if not better, based on quantum circuits commonly used for variational quantum algorithms. Within the trained noise model, readout error has the most detrimental impact on computations. Our benchmarking approach satisfies relevant quality criteria by choosing suitable quantum circuits and objective functions to compare model predictionsto hardware data. Moreover, the quantum circuit model can be extended meaningfully by noise channels.Conclusion: Our benchmarking approach is suitable for evaluating and comparing quantum computing noise models. In future work, volumetric benchmarks should be performed for various noise models and application contexts. The parameter optimisation based on learning with training circuits yields accurate noise models and shows the importance of mitigating measurement error. Different optimisation algorithms and quantum circuits should be explored, and more types of noise should be incorporated into the noise model.