Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

OSA Continuum

Polarization spectroscopy of an excited state transition in Rubidium

Nourah F. A. Almuhawish, Shuying Chen, Lucy A. Downes, Matthew J. Jamieson, Andrew R. MacKellar, Kevin J. Weatherill

Published Sep 22, 2021• 5 citations
Publisher

Abstract

We investigate polarization spectroscopy of an excited state transition in room-temperature rubidium vapor. By applying a circularly polarized coupling beam, resonant with the 52S1/2 → 52P3/2 transition, we induce anisotropy in the atomic medium that is then probed by scanning a probe beam across the 52P3/2 → 62S1/2 transition. By performing polarimetry on the probe beam, a dispersive spectral feature is observed. We characterize the excited-state polarization spectrum as a function of coupling intensity for both isotopes and find that at high intensities, Autler-Townes splitting results in a sub-feature, which theoretical modelling shows is enhanced by Doppler averaging. This spectroscopic technique produces a narrow dispersive signal which is ideal for laser frequency stabilization to excited-state transitions.

DOI
10.1364/osac.439037

Related papers

Polarization spectroscopy of an excited state transition

Christopher Carr, Charles S. Adams, Kevin J. Weatherill

We demonstrate polarization spectroscopy of an excited state transition in room-temperature cesium vapor. An anisotropy induced by a circularly polarized pump beam on the D2 transition is observed using a weak probe on the 6P(3/2)→7S(1/2) transition. At high pump power, a subfeature due to Autler-Townes splitting is observed that theoretical modeling shows is enhanced by Doppler averaging. Polarization spectroscopy provides a simple modulation-free signal suitable for laser frequency stabilization to excited state transitions.

arXiv:1107.2582•Optics Letters•Jan 1, 2012•64 citations

Comparison of absorption, fluorescence, and polarization spectroscopy of atomic rubidium

Seth Ashman, C. Stifler, Joaquín Romero

An ongoing spectroscopic investigation of atomic rubidium utilizes a two-photon, single-laser excitation process. Transitions accessible with our tunable laser include 5P1/2 (F ′ ) ← 5S1/2 (F) and 5P3/2 (F ′ ) ← 5S1/2 (F). The laser is split into a pump and probe beam to allow for Doppler-free measurements of transitions between hyperfine levels. The pump and probe beams are overlapped in a counter-propagating geometry and the laser frequency scans over a transition. Absorption, fluorescence and polarization spectroscopy techniques are applied to this basic experimental setup. The temperature of the vapor cell and the power of the pump and probe beams have been varied to explore line broadening effects and signal-to-noise of each technique. This humble setup will hopefully grow into a more robust experimental arrangement in which double resonance, two-laser excitations are used to explore hyperfine state changing collisions between rubidium atoms and noble gas atoms. Rb-noble gas collisions can transfer population between hyperfine levels, such as 5P3/2 (F ′ = 3) Collision ←− 5P3/2 (F ′ = 2), and the probe beam couples 7S1/2 (F ′′ = 2) ← 5P3/2 (F ′ = 3). Polarization spectroscopy signal depends on the rate of population transfer due to the collision as well as maintaining the orientation created by the pump laser. Fluorescence spectroscopy relies only on transfer of population due to the collision. Comparison of these techniques yields information regarding the change of the magnetic sublevels, mF , during hyperfine state changing collisions.

Bulletin of the American Physical Society•Jun 11, 2015•0 citations

Polarization spectroscopy of a closed atomic transition: applications to laser frequency locking

C P Pearman, Charles S. Adams, Simon G. Cox +3 more

We study polarization spectroscopy of Rb vapour. A weak probe beam analyses the birefringence induced in a room temperature vapour by a strong counterpropagating circularly polarized pump beam. In contrast to most other work on polarization spectroscopy, we use a polarization beam splitting cube and two detectors (rather than a polarizer and one detector) to analyse the probe beam. The signal is in the form of a derivative of a Lorentzian. For theoretical analysis we study the closed atomic transition 5 2 S 1/2 ( F = 3) → 5 2 P 3/2 ( F ' = 4) in the D2 line of 85 Rb. We study the time needed to redistribute population among the m F states, derive an expression for the expected lineshape and present experimental data in excellent agreement with theory. The polarization spectrum provides an ideal error signal for frequency stabilization of a laser. We describe the geometry and parameters for optimizing the error signal.

Journal of Physics B Atomic Molecular and Optical Physics•Dec 4, 2002•229 citations

Single-Photon-Level Sub-Doppler Pump-Probe Spectroscopy of Rubidium

Paul Burdekin, Samuele Grandi, Rielly Newbold +3 more

We propose and demonstrate pump-probe spectroscopy of rubidium absorption that reveals the sub-Doppler hyperfine structure of the ${}^{5}{\mathrm{S}}_{1/2}\ensuremath{\leftrightarrow}{}^{5}{\mathrm{P}}_{3/2}$ (${\mathrm{D}}_{2}$) transitions. The counterpropagating pump and probe lasers are independently tunable in frequency, with the probe operating at the single-photon level. The two-dimensional spectrum measured as the laser frequencies are scanned shows fluorescence, Doppler-broadened absorption dips, and sub-Doppler features. The detuning between the pump and probe lasers allows compensation of the Doppler shift for all atomic velocities in the room-temperature vapor, meaning we observe sub-Doppler features for all atoms in the beam. We detail a theoretical model of the system that incorporates fluorescence, saturation effects, and optical pumping and compare this with the measured spectrum, finding a mean absolute percentage error of 3.11%. This high level of agreement allows us to extract the number density and temperature of the $\mathrm{Rb}$ vapor from the two-dimensional spectrum. In the future this technique could be used as an atomic frequency standard for calibrating and characterising a single-photon or low-light-level source.

arXiv:2007.08452•Physical Review Applied•Oct 23, 2020•10 citations

Spectroscopic Study of Ultracold Rubidium Atoms in an Optical Dipole Force Trap

Eman Mohammed Ahmed

The interaction of light with atoms and molecules is of fundamental interest in many branches of science. In atomic physics, this interaction can be used to cool and spatially confine (trap) atoms. These traps can be used as the starting point for other experiments, but the dynamics of the cooling and trapping processes is itself of interest. In order to better understand the physics of trapping atoms in an optical dipole force trap, we have conducted a series of spectroscopic measurements of ultracold rubidium atoms in such a trap. The trap was created at the focus of a Nd:YAG laser beam with wavelength 1064nm and nearly Gaussian spatial mode. For rubidium, the trap light is red-detuned and the atoms are confined to the highest intensity in the beam. In order to probe the atoms confined in the trap, we have performed spectroscopy on the 5S1/2 → 5P3/2 transition. Because the polarizability of the ground and excited states is not the same at the trap wavelength, the spectra exhibit both a shift and inhomogeneous broadening. We have investigated the spectra for both linear and circular polarized traps. We also studied the application of a second laser to couple the excited state (5P3/2) to another higher excited state (5D5/2) to reduce the inhomogeneous broadening of the 5S1/2 → 5P 3/2 transition. Finally, two-photon spectroscopy was performed on atoms in the dipole force trap and compared to spectra taken in a magneto optical trap (MOT). Autler-Townes splitting was clearly observed in the MOT and appears to have been observed in the dipole force trap also.

•Jan 1, 2010•0 citations

Measuring the Hyperfine Splittings of Lowest Energy Atomic Transitions in Rubidium

Benjamin Graber

The goal of this experiment was to measure the hyperfine energy splittings of the ground to first excited state transitions in rubidium using saturated absorption spectroscopy. Using this technique, we measured these transition energy spectra by taking the difference of two photodiode outputs due to multiple beams of a single laser scanned over a range of frequencies and shone through a cell of Rb vapor. When the laser frequency was resonant with an atomic transition, photons of those frequencies were absorbed, leaving a dip in intensity of the beam measured at the photodiode. One of the two laser beams had its excitations saturated by a more intense, counter-propagating pump beam from the same laser. The pump beam saturated the absorption of the velocity equal zero atoms that the counter-propagating probe beam could have also interacted with due to no Doppler shift. At these frequencies the probe beam experienced less absorption that was measured by a photodiode. The photodiode output was calibrated to the change in frequency of the scanned laser using a Fabry-Pérot interferometer. The output of this interferometer served as a reference for how the laser frequency changed. Final results for the 87Rb F=1 spectrum accounted for the largest error with a maximum of 12.2% deviation from accepted energy spacing values due in part to systematic error. Other spectra measurements were in better agreement, possessing error ranging from 2.1% to 10.1% and some agreeing with accepted values to within our uncertainty.

•Jan 1, 2015•0 citations
We investigate polarization spectroscopy of an excited state transition in room-temperature rubidium vapor. By applying a circularly polarized coupling beam, resonant with the 52S1/2 → 52P3/2 transition, we induce anisotropy in the atomic medium that is then probed by scanning a probe beam across the 52P3/2 → 62S1/2 transition. By performing polarimetry on the probe beam, a dispersive spectral feature is observed. We characterize the excited-state polarization spectrum as a function of coupling intensity for both isotopes and find that at high intensities, Autler-Townes splitting results in a sub-feature, which theoretical modelling shows is enhanced by Doppler averaging. This spectroscopic technique produces a narrow dispersive signal which is ideal for laser frequency stabilization to excited-state transitions.
We demonstrate polarization spectroscopy of an excited state transition in room-temperature cesium vapor. An anisotropy induced by a circularly polarized pump beam on the D2 transition is observed using a weak probe on the 6P(3/2)→7S(1/2) transition. At high pump power, a subfeature due to Autler-Townes splitting is observed that theoretical modeling shows is enhanced by Doppler averaging. Polarization spectroscopy provides a simple modulation-free signal suitable for laser frequency stabilization to excited state transitions.
An ongoing spectroscopic investigation of atomic rubidium utilizes a two-photon, single-laser excitation process. Transitions accessible with our tunable laser include 5P1/2 (F ′ ) ← 5S1/2 (F) and 5P3/2 (F ′ ) ← 5S1/2 (F). The laser is split into a pump and probe beam to allow for Doppler-free measurements of transitions between hyperfine levels. The pump and probe beams are overlapped in a counter-propagating geometry and the laser frequency scans over a transition. Absorption, fluorescence and polarization spectroscopy techniques are applied to this basic experimental setup. The temperature of the vapor cell and the power of the pump and probe beams have been varied to explore line broadening effects and signal-to-noise of each technique. This humble setup will hopefully grow into a more robust experimental arrangement in which double resonance, two-laser excitations are used to explore hyperfine state changing collisions between rubidium atoms and noble gas atoms. Rb-noble gas collisions can transfer population between hyperfine levels, such as 5P3/2 (F ′ = 3) Collision ←− 5P3/2 (F ′ = 2), and the probe beam couples 7S1/2 (F ′′ = 2) ← 5P3/2 (F ′ = 3). Polarization spectroscopy signal depends on the rate of population transfer due to the collision as well as maintaining the orientation created by the pump laser. Fluorescence spectroscopy relies only on transfer of population due to the collision. Comparison of these techniques yields information regarding the change of the magnetic sublevels, mF , during hyperfine state changing collisions.
We study polarization spectroscopy of Rb vapour. A weak probe beam analyses the birefringence induced in a room temperature vapour by a strong counterpropagating circularly polarized pump beam. In contrast to most other work on polarization spectroscopy, we use a polarization beam splitting cube and two detectors (rather than a polarizer and one detector) to analyse the probe beam. The signal is in the form of a derivative of a Lorentzian. For theoretical analysis we study the closed atomic transition 5 2 S 1/2 ( F = 3) → 5 2 P 3/2 ( F ' = 4) in the D2 line of 85 Rb. We study the time needed to redistribute population among the m F states, derive an expression for the expected lineshape and present experimental data in excellent agreement with theory. The polarization spectrum provides an ideal error signal for frequency stabilization of a laser. We describe the geometry and parameters for optimizing the error signal.
We propose and demonstrate pump-probe spectroscopy of rubidium absorption that reveals the sub-Doppler hyperfine structure of the ${}^{5}{\mathrm{S}}_{1/2}\ensuremath{\leftrightarrow}{}^{5}{\mathrm{P}}_{3/2}$ (D2{\mathrm{D}}_{2}D2​) transitions. The counterpropagating pump and probe lasers are independently tunable in frequency, with the probe operating at the single-photon level. The two-dimensional spectrum measured as the laser frequencies are scanned shows fluorescence, Doppler-broadened absorption dips, and sub-Doppler features. The detuning between the pump and probe lasers allows compensation of the Doppler shift for all atomic velocities in the room-temperature vapor, meaning we observe sub-Doppler features for all atoms in the beam. We detail a theoretical model of the system that incorporates fluorescence, saturation effects, and optical pumping and compare this with the measured spectrum, finding a mean absolute percentage error of 3.11%. This high level of agreement allows us to extract the number density and temperature of the Rb\mathrm{Rb}Rb vapor from the two-dimensional spectrum. In the future this technique could be used as an atomic frequency standard for calibrating and characterising a single-photon or low-light-level source.
The interaction of light with atoms and molecules is of fundamental interest in many branches of science. In atomic physics, this interaction can be used to cool and spatially confine (trap) atoms. These traps can be used as the starting point for other experiments, but the dynamics of the cooling and trapping processes is itself of interest. In order to better understand the physics of trapping atoms in an optical dipole force trap, we have conducted a series of spectroscopic measurements of ultracold rubidium atoms in such a trap. The trap was created at the focus of a Nd:YAG laser beam with wavelength 1064nm and nearly Gaussian spatial mode. For rubidium, the trap light is red-detuned and the atoms are confined to the highest intensity in the beam. In order to probe the atoms confined in the trap, we have performed spectroscopy on the 5S1/2 → 5P3/2 transition. Because the polarizability of the ground and excited states is not the same at the trap wavelength, the spectra exhibit both a shift and inhomogeneous broadening. We have investigated the spectra for both linear and circular polarized traps. We also studied the application of a second laser to couple the excited state (5P3/2) to another higher excited state (5D5/2) to reduce the inhomogeneous broadening of the 5S1/2 → 5P 3/2 transition. Finally, two-photon spectroscopy was performed on atoms in the dipole force trap and compared to spectra taken in a magneto optical trap (MOT). Autler-Townes splitting was clearly observed in the MOT and appears to have been observed in the dipole force trap also.
The goal of this experiment was to measure the hyperfine energy splittings of the ground to first excited state transitions in rubidium using saturated absorption spectroscopy. Using this technique, we measured these transition energy spectra by taking the difference of two photodiode outputs due to multiple beams of a single laser scanned over a range of frequencies and shone through a cell of Rb vapor. When the laser frequency was resonant with an atomic transition, photons of those frequencies were absorbed, leaving a dip in intensity of the beam measured at the photodiode. One of the two laser beams had its excitations saturated by a more intense, counter-propagating pump beam from the same laser. The pump beam saturated the absorption of the velocity equal zero atoms that the counter-propagating probe beam could have also interacted with due to no Doppler shift. At these frequencies the probe beam experienced less absorption that was measured by a photodiode. The photodiode output was calibrated to the change in frequency of the scanned laser using a Fabry-Pérot interferometer. The output of this interferometer served as a reference for how the laser frequency changed. Final results for the 87Rb F=1 spectrum accounted for the largest error with a maximum of 12.2% deviation from accepted energy spacing values due in part to systematic error. Other spectra measurements were in better agreement, possessing error ranging from 2.1% to 10.1% and some agreeing with accepted values to within our uncertainty.