Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design of Fault-Tolerant Quantum Ripple Carry Adder

Dr.T.Godhavari U.Jayalatsumi

Published Sep 17, 2021• 0 citations
OpenAlex

Abstract

The performance of existing technology for implementing digital circuits based on irreversible logic is closely reaching its limit. Conventional logic circuits result in heat dissipation whenever there is an information loss. Hence reversible logic is attaining major consideration in the perspective of evolving technologies such as quantum computing as there isno information loss and there is a unique mapping between the input vectors and output vectors. A reversible gate is supposed to be parity preserving if there existsimilarity between input parityand the outputparity.To construct reliable fault-tolerant reversible systems elements should be of fault-tolerant reversiblestructures.Adder circuits are studied extensively since their performance can directly affect the entire digital system. This paper presents a Toffoli gate (TG) based fulladderwhich serves as a fundamental component in constructing a ripple carry adder. Further a parity preserving Toffoligate based full adder is presented which was utilized to develop a fault-tolerant Ripple Carry Adder without compromising on its performance.The proposed designs have been simulated using IBM Quantum Simulator and have been verified for their correctness. The proposed adders will serve as vital design components in developing fault-tolerant reversible arithmetic and logic unit.

Related papers

Reversible adder design for ripple carry and carry look ahead (4, 8, 16, 32-bit)

Somani Neelam, Chaudhary Chitrita, S. Ramani Yadav

Reversible logic has represented itself as a prominent technology which plays an important role in Quantum Computing. Theoretically Quantum Computers operates at high speed and consumes less power. Furthermore, Reversible logic can break the conventional speed of power trade-off. To prove this we are implementing Ripple Carry Adder and Carry Look Ahead Adder using reversible logic gates. The paper presents efficient adder circuits using Peres gate, New fault Tolerant gate and Double Feyman gate. The complexity, simulated outputs and the speed parameters for the adder circuit have been indicated using the Quartus II 9.1 edition and Modelsim tool. Moreover, the quantum algorithms can potentially solve NP-complete problems. Furthermore, doing high performance functions beyond the limit of deterministic computer systems is possible by only reversible logic. Quantum operations are unitary in nature which is reversible and hence the arithmetic operations like adders can be implemented using the reversible logic. Likewise, optimized block size, minimum ancillary bits, and one to one mappings of inputs and outputs are obtained in the reversible adder circuit, giving fan out as 1. Hence, the Ripple Carry Adder and Carry look Ahead Adder is providing complexity reduction and high speed, proving to be an efficient and important part in the development of arithmetic blocks of Quantum Computers.

International Conference on Computing, Communication and Automation•Apr 1, 2016•12 citations

Optimization of Ripple Carry Adder using Quantum Computing

N.Parvatham, Rithiga R, Ruzmina M +1 more

This paper presents the design, optimization, and simulation of arithmetic circuits using reversible logic for quantum computing applications. The motivation behind this work is to achieve resource-efficient computation through reduced quantum cost, minimized garbage outputs, and lower ancilla requirements. The methodology involves implementing Half Adders, Full Adders, Multiplexers, and Ripple Carry Adders (RCAs) using Toffoli and Peres gates. The proposed 8-bit RCA achieves a quantum cost of 58 using 24 qubits, 8 garbage outputs, and 6 ancilla inputs—showing a significant improvement over conventional Toffoli-based designs that require higher quantum cost and resources. Simulations were conducted on IBM Qiskit and Google Colab using the Qiskit SDK to validate circuit correctness and scalability. The obtained results demonstrate superior resource efficiency and confirm the feasibility of reversible-logic-based quantum arithmetic as a foundation for scalable quantum arithmetic logic units (ALUs) and processors.

International Conference on Ubiquitous Computing and Intelligent Information Systems (ICUIS)•Nov 26, 2025•0 citations

Fault Analysis and Quantum Hardware Validation of a Peres Gate Based Reversible Full Adder

Balakrishna Peyyala, Nagalakshmi Harisha A, S. N. Koteswara Rao G.

Quantum computing is gaining importance as a promising approach for achieving energy-efficient and reliable computation, where reversible logic circuits play a key role. Full adders are fundamental components of arithmetic and logic units, and their correct operation is essential for overall system performance. With continued technology scaling, digital circuits are increasingly affected by manufacturing defects and permanent faults, making fault modeling and testability analysis critically important. Among various fault models, the stuck-at fault model is widely used due to its simplicity and its ability to represent common physical defects. This paper presents a detailed stuck-at fault analysis of a reversible full adder designed using Peres gates. The proposed architecture efficiently generates Sum and Carry outputs while reducing gate count and information loss. To evaluate practical feasibility, the full adder is implemented on the IBM quantum computing platform using IBM Composer and simulated through the Qiskit framework. Both fault-free and faulty conditions are examined by introducing stuck- at-0 and stuck-at-1 faults at key nodes affecting the Sum and Carry outputs. State-vector analysis, probability distributions, and measurement results are obtained for all possible input combinations. The exhaustive fault analysis achieves a fault coverage of 87.5% for both SA-0 and SA-1 conditions, indicating high fault observability. The results confirm that the proposed Peres gate–based reversible full adder is well suited for fault-tolerant arithmetic applications in reversible and quantum computing environments.

•Mar 30, 2026•0 citations

Design and Implementation of an Efficient Quantum Cost Optimized Full Adder Using Reversible Logic Gates

S. Bhavani, ,,Vamsi Thota,, Pushkar Nallangadu +3 more

In the context of modern Very Large-Scale Integration (VLSI) technology, information loss has been a major concern. Logic gates (LG) such as AND, OR, and NOT have been found to result in information loss during their operations. To address this issue, reversible LGs have been created. The development and implementation of a high-speed, efficient full adder circuit employing reversible LGs like Feynman, Toffoli, and Peres gates. The design aims to improve computational and thermal efficiencies. The circuit refarding quantum costs (QC), garbage outputs, and ancillary inputs. The implemented the suggested design in Verilog and verified the entire adder's functionality and efficiency through simulations using the Xilinx Vivado and Xilinx ISE tools. The circuit has a quantum cost of 10 with two outputs of useless and one auxiliary input, according to the researchers, highlighting its opportunities for usage in quantum computing applications andlow-power (dec 84%), high-performance computing systems.

International Scientific Journal of Engineering and Management•Apr 11, 2026•0 citations

Design of efficient reversible logic-based binary and BCD adder circuits

Himanshu Thapliyal, Nagarajan Ranganathan

Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.

arXiv:1712.02630•ACM Journal on Emerging Technologies in Computing Systems•Sep 1, 2013•111 citations

Synthesis of a reversible quantum Vedic multiplier on IBM quantum computers

Mojtaba Noorallahzadeh, Mohammad Mosleh

Quantum computers provide considerable potential to enhance computing technology, anticipated to surpass conventional computers by resolving intricate challenges that existing systems cannot tackle. They use quantum algorithms for improved performance and depend on reversible computations based on quantum physics and linear algebra. In contrast to traditional computing, which may include irreversible processes, quantum computing relies on unitary operations that are fundamentally reversible. The parity-preserving feature enables the identification of both permanent and transient defects within circuits. The parity-preserving feature ensures that the input and output states are equal in reversible circuits. Vedic multipliers offer a crucial foundation in the design and implementation of digital circuits, recognized for their speed, efficiency, ease of calculations, reduction of errors, and broad applicability. Prior investigations of quantum Vedic multipliers have faced obstacles like elevated Quantum Cost (QC), substantial Garbage Output (GO), Constant Input (CI), augmented Gate Count (GC), and CNOT-V/V+ count, resulting in more resource use and implementation intricacy. These inefficiencies hinder the scalability and feasibility of quantum multipliers in high-performance computing applications. A proposed solution to these issues is to introduce a cost-effective, parity-preserving reversible quantum block synthesized through an established method that produces a network list of multi-controlled Toffoli (MCT) gates. This Toffoli-based network is then optimized using various techniques, ultimately transforming it into a network of fundamental quantum gates. This approach decreases quantum expenses, eliminates unnecessary outputs, and enhances quantum gate efficiency. Integrating this innovative technique into the reversible quantum Vedic multipliers offers a more efficient, cost-effective, and scalable solution than current approaches. All proposed designs, such as a half adder-subtractor, a ripple carry adder (RCA), and two-bit and four-bit Vedic multipliers, are suggested based on functional blocks and pre-existing components. The suggested structures undergo evaluation in comparison to existing state-of-the-art procedures, demonstrating their cost-effectiveness. The observed average savings for two-bit and four-bit Vedic multipliers, with respect to QC, number of CNOT-V/V+ count, GO, CI, and GC, are 20.01%, 19.38%, 37.51%, 37.51%, and 54.89%, and 22.71%, 18.78%, 27.23%, 31.10%, and 42.38%, respectively when compared to previous studies. Furthermore, all suggested circuits are evaluated and confirmed using the IBM quantum laboratory.

Scientific Reports•May 29, 2025•15 citations
The performance of existing technology for implementing digital circuits based on irreversible logic is closely reaching its limit. Conventional logic circuits result in heat dissipation whenever there is an information loss. Hence reversible logic is attaining major consideration in the perspective of evolving technologies such as quantum computing as there isno information loss and there is a unique mapping between the input vectors and output vectors. A reversible gate is supposed to be parity preserving if there existsimilarity between input parityand the outputparity.To construct reliable fault-tolerant reversible systems elements should be of fault-tolerant reversiblestructures.Adder circuits are studied extensively since their performance can directly affect the entire digital system. This paper presents a Toffoli gate (TG) based fulladderwhich serves as a fundamental component in constructing a ripple carry adder. Further a parity preserving Toffoligate based full adder is presented which was utilized to develop a fault-tolerant Ripple Carry Adder without compromising on its performance.The proposed designs have been simulated using IBM Quantum Simulator and have been verified for their correctness. The proposed adders will serve as vital design components in developing fault-tolerant reversible arithmetic and logic unit.
Reversible logic has represented itself as a prominent technology which plays an important role in Quantum Computing. Theoretically Quantum Computers operates at high speed and consumes less power. Furthermore, Reversible logic can break the conventional speed of power trade-off. To prove this we are implementing Ripple Carry Adder and Carry Look Ahead Adder using reversible logic gates. The paper presents efficient adder circuits using Peres gate, New fault Tolerant gate and Double Feyman gate. The complexity, simulated outputs and the speed parameters for the adder circuit have been indicated using the Quartus II 9.1 edition and Modelsim tool. Moreover, the quantum algorithms can potentially solve NP-complete problems. Furthermore, doing high performance functions beyond the limit of deterministic computer systems is possible by only reversible logic. Quantum operations are unitary in nature which is reversible and hence the arithmetic operations like adders can be implemented using the reversible logic. Likewise, optimized block size, minimum ancillary bits, and one to one mappings of inputs and outputs are obtained in the reversible adder circuit, giving fan out as 1. Hence, the Ripple Carry Adder and Carry look Ahead Adder is providing complexity reduction and high speed, proving to be an efficient and important part in the development of arithmetic blocks of Quantum Computers.
This paper presents the design, optimization, and simulation of arithmetic circuits using reversible logic for quantum computing applications. The motivation behind this work is to achieve resource-efficient computation through reduced quantum cost, minimized garbage outputs, and lower ancilla requirements. The methodology involves implementing Half Adders, Full Adders, Multiplexers, and Ripple Carry Adders (RCAs) using Toffoli and Peres gates. The proposed 8-bit RCA achieves a quantum cost of 58 using 24 qubits, 8 garbage outputs, and 6 ancilla inputs—showing a significant improvement over conventional Toffoli-based designs that require higher quantum cost and resources. Simulations were conducted on IBM Qiskit and Google Colab using the Qiskit SDK to validate circuit correctness and scalability. The obtained results demonstrate superior resource efficiency and confirm the feasibility of reversible-logic-based quantum arithmetic as a foundation for scalable quantum arithmetic logic units (ALUs) and processors.
Quantum computing is gaining importance as a promising approach for achieving energy-efficient and reliable computation, where reversible logic circuits play a key role. Full adders are fundamental components of arithmetic and logic units, and their correct operation is essential for overall system performance. With continued technology scaling, digital circuits are increasingly affected by manufacturing defects and permanent faults, making fault modeling and testability analysis critically important. Among various fault models, the stuck-at fault model is widely used due to its simplicity and its ability to represent common physical defects. This paper presents a detailed stuck-at fault analysis of a reversible full adder designed using Peres gates. The proposed architecture efficiently generates Sum and Carry outputs while reducing gate count and information loss. To evaluate practical feasibility, the full adder is implemented on the IBM quantum computing platform using IBM Composer and simulated through the Qiskit framework. Both fault-free and faulty conditions are examined by introducing stuck- at-0 and stuck-at-1 faults at key nodes affecting the Sum and Carry outputs. State-vector analysis, probability distributions, and measurement results are obtained for all possible input combinations. The exhaustive fault analysis achieves a fault coverage of 87.5% for both SA-0 and SA-1 conditions, indicating high fault observability. The results confirm that the proposed Peres gate–based reversible full adder is well suited for fault-tolerant arithmetic applications in reversible and quantum computing environments.
In the context of modern Very Large-Scale Integration (VLSI) technology, information loss has been a major concern. Logic gates (LG) such as AND, OR, and NOT have been found to result in information loss during their operations. To address this issue, reversible LGs have been created. The development and implementation of a high-speed, efficient full adder circuit employing reversible LGs like Feynman, Toffoli, and Peres gates. The design aims to improve computational and thermal efficiencies. The circuit refarding quantum costs (QC), garbage outputs, and ancillary inputs. The implemented the suggested design in Verilog and verified the entire adder's functionality and efficiency through simulations using the Xilinx Vivado and Xilinx ISE tools. The circuit has a quantum cost of 10 with two outputs of useless and one auxiliary input, according to the researchers, highlighting its opportunities for usage in quantum computing applications andlow-power (dec 84%), high-performance computing systems.
Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.
Quantum computers provide considerable potential to enhance computing technology, anticipated to surpass conventional computers by resolving intricate challenges that existing systems cannot tackle. They use quantum algorithms for improved performance and depend on reversible computations based on quantum physics and linear algebra. In contrast to traditional computing, which may include irreversible processes, quantum computing relies on unitary operations that are fundamentally reversible. The parity-preserving feature enables the identification of both permanent and transient defects within circuits. The parity-preserving feature ensures that the input and output states are equal in reversible circuits. Vedic multipliers offer a crucial foundation in the design and implementation of digital circuits, recognized for their speed, efficiency, ease of calculations, reduction of errors, and broad applicability. Prior investigations of quantum Vedic multipliers have faced obstacles like elevated Quantum Cost (QC), substantial Garbage Output (GO), Constant Input (CI), augmented Gate Count (GC), and CNOT-V/V+ count, resulting in more resource use and implementation intricacy. These inefficiencies hinder the scalability and feasibility of quantum multipliers in high-performance computing applications. A proposed solution to these issues is to introduce a cost-effective, parity-preserving reversible quantum block synthesized through an established method that produces a network list of multi-controlled Toffoli (MCT) gates. This Toffoli-based network is then optimized using various techniques, ultimately transforming it into a network of fundamental quantum gates. This approach decreases quantum expenses, eliminates unnecessary outputs, and enhances quantum gate efficiency. Integrating this innovative technique into the reversible quantum Vedic multipliers offers a more efficient, cost-effective, and scalable solution than current approaches. All proposed designs, such as a half adder-subtractor, a ripple carry adder (RCA), and two-bit and four-bit Vedic multipliers, are suggested based on functional blocks and pre-existing components. The suggested structures undergo evaluation in comparison to existing state-of-the-art procedures, demonstrating their cost-effectiveness. The observed average savings for two-bit and four-bit Vedic multipliers, with respect to QC, number of CNOT-V/V+ count, GO, CI, and GC, are 20.01%, 19.38%, 37.51%, 37.51%, and 54.89%, and 22.71%, 18.78%, 27.23%, 31.10%, and 42.38%, respectively when compared to previous studies. Furthermore, all suggested circuits are evaluated and confirmed using the IBM quantum laboratory.