Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Technology: Driving Commercialisation of an Enabling Science

Optimising the design of a broadband Josephson junction TWPA for axion dark matter search experiments

Javier Navarro Montilla, Boon-Kok Tan

Published Oct 6, 2021• 5 citations
Publisher

Abstract

Broadband ultra-low noise amplification is important for many fundamental physics experiments. In our case, we aim to develop a quantum limited Josephson Travelling Wave Parametric Amplifier (JTWPA) for dark matter search experiments. In this paper, we focus on the development of the JTWPA, in particular to optimise the performance of the amplifier with a simplified fabrication prospect. We present our methodology for the optimisation process, focusing on three important aspects, namely utilising the minimal number of tunnel junction required, maximising the operational bandwidth and achieving a 50 Ω characteristic impedance. We first explore the relations between the important circuit parameters of the JTWPA and its performance indicators. Using the information obtained, we perform our optimisation process to search for the optimal design parameters. We then compare the gain bandwidth performance of the different optimised models, and present our findings with further analyses. We demonstrate that our optimised model requires 4 less tunnel junctions compared to the conventional model, and we are able to improve the operational bandwidth by 68% while maintaining the characteristic impedance of the device at 50 Ω.

DOI
10.1117/12.2601382

Related papers

Development of superconducting josephson junction travelling wave parametric amplifiers

Navarro Montilla, Javier

Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.

•Jan 1, 2024•0 citations

Exploring the limits of the tunnel junction fabrication technique for Josephson junctions TWPA and the preliminary characterisation results

J Navarro Montilla, EFC Driessen, A Barbier +3 more

Travelling Wave Parametric Amplifiers (TWPAs) can potentially achieve quantum limited noise over a broad bandwidth in the microwave regime, with potential applications in the readout of millimetre (mm) and sub-millimetre (sub-mm) receivers to further improve the system sensitivity, among many other applications. TWPAs using embedded Josephson junctions (J-TWPA) have proven to exhibit noise performance approaching the quantum limit, however its compression point (P–1dB ~ –100 dBm) is too low for reading out mm and sub-mm astronomical receivers. Therefore, we explored the design of higher dynamic range JTWPAs to match the power requirements, and to optimise the performances of the JTWPA for this specific application. Our aim is to adapt the well-established Nb-AlOx-Nb tri-layer fabrication technique used routinely for developing high-quality Superconductor-Insulator-Superconductor (SIS) tunnel junctions to fabricate our JTWPA. Therefore, we present in this paper our investigation of the feasibility of such technique in fabricating large number of lower critical current density junctions embedded in a coplanar waveguide (CPW). The preliminary results on a 500-junctions device are in line with the expected behaviour, showing a measured gain consistent with theoretical calculations which demonstrates the potential use of the tri-layer tunnel junction technology for the fabrication of JTWPAs.

•Jan 1, 2024•0 citations

Circuit Design and Experimental Characterization of a Josephson Traveling-Wave Parametric Amplifier

Christoph Kissling

Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.

•Feb 24, 2026•0 citations

Design of high compression point Josephson junction travelling wave parametric amplifier for readout of millimetre/sub-millimetre astronomical receivers

Javier Navarro Montilla, Boon-Kok Tan

Supra-THz heterodyne mixers generally have higher conversion loss compared to the millimetre-wave mixers. Hence, the overall receiver noise temperature becomes increasingly dominated by the first-stage semiconductor low noise amplifier (LNA), which still struggles to achieve quantum-limited noise performance. Here, we aim to develop a Josephson junction travelling wave parametric amplifier (JTWPA) that can achieve high gain over broad bandwidth but with better noise performance to replace these Intermediate Frequency (IF) amplifiers. JTWPAs are typically considered not suitable for astronomical receivers due to their low power handling capability. However, the critical current of the Josephson junctions (JJ) can be easily engineered to match the output power of the front-end detectors. Nevertheless, this may results in the requirement of a higher number of JJs as the junction inductance is in reverse relation with the critical current. Therefore, in this paper, we aim to explore the different design parameters required for developing a JTWPA with a dynamic range compatible for readout a Superconductor-Insulator-Superconductor (SIS) mixer, as an example. Here, we present two JTWPA models that are suitable for the objective, one requiring 3,142 Nb/Al-AlOx/Nb junctions with a maximum gain of 23 dB, and the other with a lower gain at 16 dB but requires only 1,317 JJs. We then compare the SIS receiver noise performance utilising these JTWPAs with that of using a conventional high gain High Electron Mobility Transistor (HEMT) amplifier. We show that we can improve the receiver sensitivity significantly by either cascading two 23 dB gain JTWPA or using a combination of a 16 dB gain JTWPA and a HEMT amplifier. We conclude that the former option more suitable for large detector array applications as it completely replaces the high heat dissipation HEMT amplifiers; while the latter option is favourable at this stage for low pixel count application as it is easier to fabricate a lower number of junctions JTWPA.

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI•Jul 15, 2022•1 citation

A dispersion-engineered Josephson travelling wave parametric amplifier with periodic impedance perturbation

K Ratter, B-K Tan

We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.

•Jan 1, 2021•0 citations

Design of a Traveling-Wave Parametric Amplifier with a π -Josephson Junction

Shuyuan Cui, Daiki Fukuyo, Hiroshi Shimada +1 more

Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.

Journal of Physics Conference Series•Jul 1, 2026•0 citations
Broadband ultra-low noise amplification is important for many fundamental physics experiments. In our case, we aim to develop a quantum limited Josephson Travelling Wave Parametric Amplifier (JTWPA) for dark matter search experiments. In this paper, we focus on the development of the JTWPA, in particular to optimise the performance of the amplifier with a simplified fabrication prospect. We present our methodology for the optimisation process, focusing on three important aspects, namely utilising the minimal number of tunnel junction required, maximising the operational bandwidth and achieving a 50 Ω characteristic impedance. We first explore the relations between the important circuit parameters of the JTWPA and its performance indicators. Using the information obtained, we perform our optimisation process to search for the optimal design parameters. We then compare the gain bandwidth performance of the different optimised models, and present our findings with further analyses. We demonstrate that our optimised model requires 4 less tunnel junctions compared to the conventional model, and we are able to improve the operational bandwidth by 68% while maintaining the characteristic impedance of the device at 50 Ω.
Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.
Travelling Wave Parametric Amplifiers (TWPAs) can potentially achieve quantum limited noise over a broad bandwidth in the microwave regime, with potential applications in the readout of millimetre (mm) and sub-millimetre (sub-mm) receivers to further improve the system sensitivity, among many other applications. TWPAs using embedded Josephson junctions (J-TWPA) have proven to exhibit noise performance approaching the quantum limit, however its compression point (P–1dB ~ –100 dBm) is too low for reading out mm and sub-mm astronomical receivers. Therefore, we explored the design of higher dynamic range JTWPAs to match the power requirements, and to optimise the performances of the JTWPA for this specific application. Our aim is to adapt the well-established Nb-AlOx-Nb tri-layer fabrication technique used routinely for developing high-quality Superconductor-Insulator-Superconductor (SIS) tunnel junctions to fabricate our JTWPA. Therefore, we present in this paper our investigation of the feasibility of such technique in fabricating large number of lower critical current density junctions embedded in a coplanar waveguide (CPW). The preliminary results on a 500-junctions device are in line with the expected behaviour, showing a measured gain consistent with theoretical calculations which demonstrates the potential use of the tri-layer tunnel junction technology for the fabrication of JTWPAs.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
Supra-THz heterodyne mixers generally have higher conversion loss compared to the millimetre-wave mixers. Hence, the overall receiver noise temperature becomes increasingly dominated by the first-stage semiconductor low noise amplifier (LNA), which still struggles to achieve quantum-limited noise performance. Here, we aim to develop a Josephson junction travelling wave parametric amplifier (JTWPA) that can achieve high gain over broad bandwidth but with better noise performance to replace these Intermediate Frequency (IF) amplifiers. JTWPAs are typically considered not suitable for astronomical receivers due to their low power handling capability. However, the critical current of the Josephson junctions (JJ) can be easily engineered to match the output power of the front-end detectors. Nevertheless, this may results in the requirement of a higher number of JJs as the junction inductance is in reverse relation with the critical current. Therefore, in this paper, we aim to explore the different design parameters required for developing a JTWPA with a dynamic range compatible for readout a Superconductor-Insulator-Superconductor (SIS) mixer, as an example. Here, we present two JTWPA models that are suitable for the objective, one requiring 3,142 Nb/Al-AlOx/Nb junctions with a maximum gain of 23 dB, and the other with a lower gain at 16 dB but requires only 1,317 JJs. We then compare the SIS receiver noise performance utilising these JTWPAs with that of using a conventional high gain High Electron Mobility Transistor (HEMT) amplifier. We show that we can improve the receiver sensitivity significantly by either cascading two 23 dB gain JTWPA or using a combination of a 16 dB gain JTWPA and a HEMT amplifier. We conclude that the former option more suitable for large detector array applications as it completely replaces the high heat dissipation HEMT amplifiers; while the latter option is favourable at this stage for low pixel count application as it is easier to fabricate a lower number of junctions JTWPA.
We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.
Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.