Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Effects related to the temperature of atoms in an atom interferometry gravimeter based on ultra-cold atoms

Heng Zhang, Xudong Ren, Wenhua Yan, Yuan Sheng Cheng, Hang Zhou, Zhi Qiang Gao, Qin Luo, Min-Kang Zhou, Zhong-Kun Hu

Published Aug 27, 2021• 17 citations
Publisher

Abstract

The temperature of atoms, coupled to several effects, plays an important role in high precision atom interferometry gravimeters. In this work, we present an ultra-cold 87Rb atom interferometry gravimeter, in which the atom source is produced by evaporative cooling in an all optical dipole trap to investigate the effects related to atom temperature. A condensate containing 4 × 104 atoms can be prepared within 3.2 s through an all-optical dipole trap composed of two reservoirs and a dimple. The fringe contrast of our atom interferometry gravimeter reaches up to 76(4)% due to the advantage of ultra-cold atom source even at a free evolution time of T=80 ms. A resolution of 6 μGal (1 μGal=1×10−8 m/s2) after 3000 s integration time with a sampling rate of 0.25 Hz is achieved in this atom gravimeter. The relationship between the fringe contrast and the atom temperature in the atom gravimeter is studied; in addition, the wavefront aberration effect in the atom gravimeter is also investigated by varying the temperature of atoms.

DOI
10.1364/oe.433968

Related papers

Improving the Accuracy of Atom Gravimeters with Ultracold Sources

Romain Karcher, Almazbek Imanaliev, Sébastien Merlet +1 more

Summary form only given. Atom interferometry based on cold atoms and light beamsplitters is a mature technique, which allows for the realization of highly sensitive inertial sensors. In the most advanced inertial sensors based on atom interferometry, atomic wavepackets are manipulated by light beamsplitters using two-photon Raman transitions. The interferometer phase shift, which depends on the acceleration and the rotation of the experimental setup with respect to the inertial reference frame defined by the atoms in free fall, is derived from the relative displacement of the atoms with respect to the beamsplitter laser's equiphases. Wavefront aberrations thus induce parasitic phase shifts, which bias the measurement, and which are linked to the residual ballistic motion of the atoms across the laser beam profile during their free fall and cancels out at zero atomic temperature. The wavefront distortions of the lasers beamsplitters is an important limit in the accuracy of atom interferometers and in particular, the dominating contribution in best cold atom gravimeters (CAG) uncertainty budget. This work clears the way towards unprecedented accuracies for absolute gravimetry, below the 1 μGal level. The method proposed can be applied to any atomic sensor based on light beamsplitters, which are inevitably affected by distortions of the lasers wavefronts. The improved control of systematics it provides will have significant impact in high precision measurements with atom interferometry, with important applications to geodesy, fundamental physics tests and to the development of highest grade inertial sensors.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

All-Optical Source of Ultra-Cold Atomic Ensembles for Microgravity Missions

Marian Woltmann

Ultra-cold atoms have become indispensable in quantum sensing, quantum computing, and quantum communication applications, as well as in fundamental sciences. In quantum sensing, they enable precision measurements with outstanding sensitivities that can be of great benefit in navigation, geodesy, and fundamental physics applications. The sensitivity of the atom interferometers used herefore typically scales with the square of the interrogation time. Therefore, in atom interferometric measurements, one seeks ensembles that feature a particularly low internal kinetic energy and can thus be detected after a long time-of-flight. The lowest values are achieved using Bose-Einstein condensates in conjunction with delta-kick collimation, a technique for the collimation of the atomic wave function. Bose-Einstein condensation can be achieved using a multi-stage laser cooling scheme, followed by evaporative cooling, which finally brings the temperature down to the critical temperature, typically in the nanokelvin regime. In addition to the low thermal spread, microgravity enables particularly long observation times, as it avoids limitations of the interrogation time due to vacuum chamber constraints, which are present when falling freely under the influence of gravity. Additionally, microgravity enables measurements that are not possible under normal gravity conditions, such as buoyancy-free miscibility studies, truly uniform potentials, and advanced cold atom quantum memories, which are projected to feature unprecedented time-bandwidth products. For the preparation of a Bose-Einstein condensate, two techniques are widely used in science, namely magnetic traps and optical dipole traps. For microgravity missions, magnetic traps on atom chips have been used in nearly all setups so far due to their particularly low SWAP budget and high cold atom flux. In contrast, ground-based experiments often prefer optical traps due to their higher versatility, full optical access, and the absence of surfaces in proximity to the atoms, which is fundamental for precision measurements. Additionally, optical traps enable the manipulation of intra- and inter-species scattering lengths using Feshbach resonances. Compared to atom chip traps, they also feature an intrinsically better symmetry of the trapping potential, in theory leading to fewer aberrations in matter-wave optics. The latter could enable the generation of ensembles in the yet unreached femtokelvin regime using delta-kick collimation with fewer perturbations. This thesis is about the realization of a 1064nm optical dipole trap set up for the microgravity environment of the Bremen Drop Tower. It aims to highlight the advantages of optical traps in conjunction with microgravity and prepare optical trapping technology for use in future microgravity and space missions. The thesis describes the experimental setup, the direct loading process, the characterization of the optical potential, and the optimization and investigation of the evaporative cooling in the optical dipole trap. For the evaporation process, the influence of gravity is comprehensively investigated through analytical calculations and microgravity tests. Bose-Einstein condensation is demonstrated, proving the achievement of condensation through absorption imaging of the spatial distribution, tests on the free evolution of the ensemble, and investigation of the phase-space densities achieved. Up to (74 ± 4)% condensation of an ensemble featuring (30 000 ± 13 000) atoms at a kinetic temperature of (37 ± 3) nK is demonstrated. The evaporation shows high efficiency down to a 3 s evaporation time, while a critical phase-space density can be achieved within (1.29 ± 0.07) s using an even faster evaporation ramp. This opens the door to fundamental physics experiments on Bose-Einstein condensates in microgravity, as well as applications pursuing atomic ensembles with exceptionally low expansion velocities.

•Apr 16, 2026•0 citations

Improving the accuracy of atom interferometers with ultracold sources

Romain Karcher, Almazbek Imanaliev, Sébastien Merlet +1 more

We report on the implementation of ultracold atoms as a source in a state of the art atom gravimeter. We perform gravity measurements with 10 nm s −2 statistical uncertainties in a so-far largely unexplored temperature range for such a high accuracy sensor, down to 50 nK. This allows for an improved characterization of the most limiting systematic effect, related to wavefront aberrations of light beamsplitters. A thorough model of the impact of this effect onto the measurement is developed and a method is proposed to correct for this bias based on the extrapolation of the measurements down to zero temperature. Finally, an uncertainty of 13 nm s −2 is obtained in the evaluation of this systematic effect, which can be improved further by performing measurements at even lower temperatures. Our results clearly demonstrate the benefit brought by ultracold atoms to the metrological study of free falling atom interferometers. By tackling their main limitation, the method presented here allows reaching record-breaking accuracies for inertial sensors based on atom interferometry.

arXiv:1804.04909•New Journal of Physics•Nov 13, 2018•130 citations

Development and characterization of 87 Rb atomic ensemble for absolute quantum gravimeter

Anju, Harish Kumar Rathore, Nawaz Sarif Mallick +2 more

Abstract The precision measurement of acceleration due to gravity (g) for potential scientific and industrial applications requires the use of absolute quantum gravimeters (AQGs) as quantum sensors. In this study, the development of magneto-optical trap (MOT) for the Rubidium-87 ( 87 Rb) atoms for integration into an atomic gravimeter has been discussed. The MOT serves as a critical component for the cooling and trapping of neutral atoms, providing a high flux, low temperature atomic ensemble for subsequent measurements in cold atomic physics, such as inertial navigation, exploration, and gravity mapping. Our setup emphasizes compactness without compromising atom number or temperature performance using the single 780 nm extended cavity diode laser. We have presented the optimized optical layout for efficient atom cooling, trapping, and detection. The obtained results show atom loading rate of ∼6.02 × 10 8 atoms within 221 ms that provides fast data acquisition for the entire cycle of AQG. The fluorescence signal from free falling MOT is also obtained, which provides time-of-flight of 211 ms and temperature of 57 μK. The system is robust against environmental perturbation and offers valuable insights into the advancement of atomic ensemble for the realization of high precision quantum sensors for geophysical and navigation applications.

Physica Scripta•Nov 1, 2025•3 citations

High-Sensitivity Absolute Atomic Gravimeter

Christine Guerlin, Tristan Farah, Anne Louchet-Chauvet +2 more

Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.

Research in Optical Sciences•Jan 1, 2012•0 citations

Cold-atom gravimetry with a Bose-Einstein condensate

J. E. Debs, P. A. Altin, Thomas H. Barter +6 more

We present a cold-atom gravimeter operating with a sample of Bose-condensed ${}^{87}$Rb atoms. Using a Mach-Zehnder configuration with the two arms separated by a two-photon Bragg transition, we observe interference fringes with a visibility of ($83\ifmmode\pm\else\textpm\fi{}6$)% at $T=3$ ms. We exploit large momentum transfer (LMT) beam splitting to increase the enclosed space-time area of the interferometer using higher-order Bragg transitions and Bloch oscillations. We also compare fringes from condensed and thermal sources and observe a reduced visibility of ($58\ifmmode\pm\else\textpm\fi{}4$)% for the thermal source. We suspect the loss in visibility is caused partly by wave-front aberrations, to which the thermal source is more susceptible due to its larger transverse momentum spread. Finally, we discuss briefly the potential advantages of using a coherent atomic source for LMT, and we present a simple mean-field model to demonstrate that with currently available experimental parameters, interaction-induced dephasing will not limit the sensitivity of inertial measurements using freely falling, coherent atomic sources.

arXiv:1011.5804•Physical Review A•Sep 9, 2011•141 citations
The temperature of atoms, coupled to several effects, plays an important role in high precision atom interferometry gravimeters. In this work, we present an ultra-cold 87Rb atom interferometry gravimeter, in which the atom source is produced by evaporative cooling in an all optical dipole trap to investigate the effects related to atom temperature. A condensate containing 4 × 104 atoms can be prepared within 3.2 s through an all-optical dipole trap composed of two reservoirs and a dimple. The fringe contrast of our atom interferometry gravimeter reaches up to 76(4)% due to the advantage of ultra-cold atom source even at a free evolution time of T=80 ms. A resolution of 6 μGal (1 μGal=1×10−8 m/s2) after 3000 s integration time with a sampling rate of 0.25 Hz is achieved in this atom gravimeter. The relationship between the fringe contrast and the atom temperature in the atom gravimeter is studied; in addition, the wavefront aberration effect in the atom gravimeter is also investigated by varying the temperature of atoms.
Summary form only given. Atom interferometry based on cold atoms and light beamsplitters is a mature technique, which allows for the realization of highly sensitive inertial sensors. In the most advanced inertial sensors based on atom interferometry, atomic wavepackets are manipulated by light beamsplitters using two-photon Raman transitions. The interferometer phase shift, which depends on the acceleration and the rotation of the experimental setup with respect to the inertial reference frame defined by the atoms in free fall, is derived from the relative displacement of the atoms with respect to the beamsplitter laser's equiphases. Wavefront aberrations thus induce parasitic phase shifts, which bias the measurement, and which are linked to the residual ballistic motion of the atoms across the laser beam profile during their free fall and cancels out at zero atomic temperature. The wavefront distortions of the lasers beamsplitters is an important limit in the accuracy of atom interferometers and in particular, the dominating contribution in best cold atom gravimeters (CAG) uncertainty budget. This work clears the way towards unprecedented accuracies for absolute gravimetry, below the 1 μGal level. The method proposed can be applied to any atomic sensor based on light beamsplitters, which are inevitably affected by distortions of the lasers wavefronts. The improved control of systematics it provides will have significant impact in high precision measurements with atom interferometry, with important applications to geodesy, fundamental physics tests and to the development of highest grade inertial sensors.
Ultra-cold atoms have become indispensable in quantum sensing, quantum computing, and quantum communication applications, as well as in fundamental sciences. In quantum sensing, they enable precision measurements with outstanding sensitivities that can be of great benefit in navigation, geodesy, and fundamental physics applications. The sensitivity of the atom interferometers used herefore typically scales with the square of the interrogation time. Therefore, in atom interferometric measurements, one seeks ensembles that feature a particularly low internal kinetic energy and can thus be detected after a long time-of-flight. The lowest values are achieved using Bose-Einstein condensates in conjunction with delta-kick collimation, a technique for the collimation of the atomic wave function. Bose-Einstein condensation can be achieved using a multi-stage laser cooling scheme, followed by evaporative cooling, which finally brings the temperature down to the critical temperature, typically in the nanokelvin regime. In addition to the low thermal spread, microgravity enables particularly long observation times, as it avoids limitations of the interrogation time due to vacuum chamber constraints, which are present when falling freely under the influence of gravity. Additionally, microgravity enables measurements that are not possible under normal gravity conditions, such as buoyancy-free miscibility studies, truly uniform potentials, and advanced cold atom quantum memories, which are projected to feature unprecedented time-bandwidth products. For the preparation of a Bose-Einstein condensate, two techniques are widely used in science, namely magnetic traps and optical dipole traps. For microgravity missions, magnetic traps on atom chips have been used in nearly all setups so far due to their particularly low SWAP budget and high cold atom flux. In contrast, ground-based experiments often prefer optical traps due to their higher versatility, full optical access, and the absence of surfaces in proximity to the atoms, which is fundamental for precision measurements. Additionally, optical traps enable the manipulation of intra- and inter-species scattering lengths using Feshbach resonances. Compared to atom chip traps, they also feature an intrinsically better symmetry of the trapping potential, in theory leading to fewer aberrations in matter-wave optics. The latter could enable the generation of ensembles in the yet unreached femtokelvin regime using delta-kick collimation with fewer perturbations. This thesis is about the realization of a 1064nm optical dipole trap set up for the microgravity environment of the Bremen Drop Tower. It aims to highlight the advantages of optical traps in conjunction with microgravity and prepare optical trapping technology for use in future microgravity and space missions. The thesis describes the experimental setup, the direct loading process, the characterization of the optical potential, and the optimization and investigation of the evaporative cooling in the optical dipole trap. For the evaporation process, the influence of gravity is comprehensively investigated through analytical calculations and microgravity tests. Bose-Einstein condensation is demonstrated, proving the achievement of condensation through absorption imaging of the spatial distribution, tests on the free evolution of the ensemble, and investigation of the phase-space densities achieved. Up to (74 ± 4)% condensation of an ensemble featuring (30 000 ± 13 000) atoms at a kinetic temperature of (37 ± 3) nK is demonstrated. The evaporation shows high efficiency down to a 3 s evaporation time, while a critical phase-space density can be achieved within (1.29 ± 0.07) s using an even faster evaporation ramp. This opens the door to fundamental physics experiments on Bose-Einstein condensates in microgravity, as well as applications pursuing atomic ensembles with exceptionally low expansion velocities.
We report on the implementation of ultracold atoms as a source in a state of the art atom gravimeter. We perform gravity measurements with 10 nm s −2 statistical uncertainties in a so-far largely unexplored temperature range for such a high accuracy sensor, down to 50 nK. This allows for an improved characterization of the most limiting systematic effect, related to wavefront aberrations of light beamsplitters. A thorough model of the impact of this effect onto the measurement is developed and a method is proposed to correct for this bias based on the extrapolation of the measurements down to zero temperature. Finally, an uncertainty of 13 nm s −2 is obtained in the evaluation of this systematic effect, which can be improved further by performing measurements at even lower temperatures. Our results clearly demonstrate the benefit brought by ultracold atoms to the metrological study of free falling atom interferometers. By tackling their main limitation, the method presented here allows reaching record-breaking accuracies for inertial sensors based on atom interferometry.
Abstract The precision measurement of acceleration due to gravity (g) for potential scientific and industrial applications requires the use of absolute quantum gravimeters (AQGs) as quantum sensors. In this study, the development of magneto-optical trap (MOT) for the Rubidium-87 ( 87 Rb) atoms for integration into an atomic gravimeter has been discussed. The MOT serves as a critical component for the cooling and trapping of neutral atoms, providing a high flux, low temperature atomic ensemble for subsequent measurements in cold atomic physics, such as inertial navigation, exploration, and gravity mapping. Our setup emphasizes compactness without compromising atom number or temperature performance using the single 780 nm extended cavity diode laser. We have presented the optimized optical layout for efficient atom cooling, trapping, and detection. The obtained results show atom loading rate of ∼6.02 × 10 8 atoms within 221 ms that provides fast data acquisition for the entire cycle of AQG. The fluorescence signal from free falling MOT is also obtained, which provides time-of-flight of 211 ms and temperature of 57 μK. The system is robust against environmental perturbation and offers valuable insights into the advancement of atomic ensemble for the realization of high precision quantum sensors for geophysical and navigation applications.
Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.
We present a cold-atom gravimeter operating with a sample of Bose-condensed 87{}^{87}87Rb atoms. Using a Mach-Zehnder configuration with the two arms separated by a two-photon Bragg transition, we observe interference fringes with a visibility of ($83\ifmmode\pm\else\textpm\fi{}6$)% at T=3T=3T=3 ms. We exploit large momentum transfer (LMT) beam splitting to increase the enclosed space-time area of the interferometer using higher-order Bragg transitions and Bloch oscillations. We also compare fringes from condensed and thermal sources and observe a reduced visibility of ($58\ifmmode\pm\else\textpm\fi{}4$)% for the thermal source. We suspect the loss in visibility is caused partly by wave-front aberrations, to which the thermal source is more susceptible due to its larger transverse momentum spread. Finally, we discuss briefly the potential advantages of using a coherent atomic source for LMT, and we present a simple mean-field model to demonstrate that with currently available experimental parameters, interaction-induced dephasing will not limit the sensitivity of inertial measurements using freely falling, coherent atomic sources.