Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Homological quantum codes beyond the toric code

Nikolas P. Breuckmann

Published Jan 1, 2017• 13 citations
Publisher

Abstract

Computer architectures which exploit quantum mechanical effects can solve computing tasks that are otherwise impossible to perform. A quantum computer operates on a number of small quantum mechanical systems, known as quantum bits, or qubits. Since these systems are realized on the scale of atoms, they are very prone to errors. Errors occur when the environment interacts with the qubits, a process called decoherence. It is widely accepted that it will not be possible to shield qubits completely from the outside world. If one were to perform a quantum computation on the qubits directly, then after a short period of time the information present in the qubits would be lost. To counter decoherence the state of a qubit can be encoded into multiple physical ones. This is called a quantum error correcting code. Performing quantum error correction allows one to extend the life time of the encoded qubit arbitrarily, assuming that the rate of errors remains below a certain threshold value. The use of quantum codes creates an overhead in resources, as for every logical qubit many more physical qubits are needed. The resource overhead for fault-tolerance is problematic, since realizing qubits will be costly, and in the early stages of building quantum computers the number of physical qubits will be limited. The currently favored coding architecture is the toric code and its variant the surface code in which the physical qubits are put on a square grid in which interactions are only between nearest neighbors. In this thesis we will explore quantum codes in which qubits interact as if they were nearest neighbors in more exotic spaces. In the first part we will consider closed surfaces with constant negative curvature. We show how such surfaces can be constructed and enumerate all quantum codes derived from them which have less than 10.000 physical qubits. For codes that are extremal in a certain sense we perform numerical simulations to determine the value of their threshold. Furthermore, we give evidence that these codes can be used for more overhead efficient storage as compared to the surface code by orders of magnitude. We also show how to read and write the encoded qubits while keeping their connectivity low. In the second part we consider codes in which qubits are layed-out according to a four- dimensional geometry. Such codes allow for much simpler decoding schemes compared to codes which are two-dimensional. In particular, measurements do not necessarily have to be repeated to obtain reliable information about the error and the classical hardware performing the error correction is greatly simplified. We perform numerical simulations to analyze the performance of these codes using decoders based on local updates. We also introduce a novel decoder based on techniques from machine learning and image recognition to decode four-dimensional codes.

DOI
10.18154/rwth-2018-01100

Related papers

PhD thesis: Homological Quantum Codes Beyond the Toric Code

Nikolas P. Breuckmann

PhD thesis investigating homological quantum codes derived from curved and higher dimensional geometries. In the first part we will consider closed surfaces with constant negative curvature. We show how such surfaces can be constructed and enumerate all quantum codes derived from them which have less than 10.000 physical qubits. For codes that are extremal in a certain sense we perform numerical simulations to determine the value of their threshold. Furthermore, we give evidence that these codes can be used for more overhead efficient storage as compared to the surface code by orders of magnitude. We also show how to read and write the encoded qubits while keeping their connectivity low. In the second part we consider codes in which qubits are layed-out according to a four- dimensional geometry. Such codes allow for much simpler decoding schemes compared to codes which are two-dimensional. In particular, measurements do not necessarily have to be repeated to obtain reliable information about the error and the classical hardware performing the error correction is greatly simplified. We perform numerical simulations to analyze the performance of these codes using decoders based on local updates. We also introduce a novel decoder based on techniques from machine learning and image recognition to decode four-dimensional codes.

arXiv:1802.01520•Feb 5, 2018•21 citations

Practical fault-tolerant quantum computing

Naomi Nickerson

Quantum computing has the potential to transform information technology by offering algorithms for certain tasks, such as quantum simulation, that are vastly more efficient than what is possible with any classical device. But experimentally implementing practical quantum information processing is a very difficult task. Here we study two important, and closely related, aspects of this challenge: architectures for quantum computing, and quantum error correction Exquisite quantum control has now been achieved in small ion traps, in nitrogen-vacancy centres and in superconducting qubit clusters, but the challenge remains of how to scale these systems to build practical quantum devices. In Part I of this thesis we analyse one approach to building a scalable quantum computer by networking together many simple processor cells, thus avoiding the need to create a single complex structure. The difficulty is that realistic quantum links are very error prone. Here we describe a method by which even these error-prone cells can perform quantum error correction. Groups of cells generate and purify shared resource states, which then enable stabilization of topologically encoded data. Given a realistically noisy network (10% error rate) we find that our protocol can succeed provided that all intra-cell error rates are below 0.8%. Furthermore, we show that with some adjustments, the protocols we employ can be made robust also against high levels of loss in the network interconnects. We go on to analyse the potential running speed of such a device. Using levels of fidelity that are either already achievable in experimental systems, or will be in the near-future, we find that employing a surface code approach in a highly noisy and lossy network architecture can result in kilohertz computer clock speeds. In Part II we consider the question of quantum error correction beyond the surface code. We consider several families of topological codes, and determine the minimum requirements to demonstrate proof-of-principle error suppression in each type of code. A particularly promising code is the gauge color code, which admits a universal transversal gate set. Furthermore, a recent result of Bombin shows the gauge color code supports an error-correction protocol that achieves tolerance to noisy measurements without the need for repeated measurements, so called single-shot error correction. Here, we demonstrate the promise of single-shot error correction by designing a decoder and investigating its performance. We simulate fault-tolerant error correction with the gauge color code, and estimate a sustainable error rate, i.e. the threshold for the long time limit, of ~0.31% for a phenomenological noise model using a simple decoding algorithm.

•Dec 1, 2015•4 citations

Architectures for fault-tolerant quantum computation

Joe O’Gorman

Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.

•Jan 1, 2017•0 citations

Fault-tolerant quantum computing with three-dimensional surface codes

Michael Vasmer

Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.

•Dec 28, 2019•3 citations

Fault-tolerance in two-dimensional topological systems

Jonas T. Anderson

This thesis is a collection of ideas with the general goal of building, at least in the abstract, a local fault-tolerant quantum computer. The connection between quantum information and topology has proven to be an active area of research in several fields. The introduction of the toric code by Alexei Kitaev demonstrated the usefulness of topology for quantum memory and quantum computation. Many quantum codes used for quantum memory are modeled by spin systems on a lattice, with operators that extract syndrome information placed on vertices or faces of the lattice. It is natural to wonder whether the useful codes in such systems can be classified. This thesis presents work that leverages ideas from topology and graph theory to explore the space of such codes. Homological stabilizer codes are introduced and it is shown that, under a set of reasonable assumptions, any qubit homological stabilizer code is equivalent to either a toric code or a color code. Additionally, the toric code and the color code correspond to distinct classes of graphs. Many systems have been proposed as candidate quantum computers. It is very desirable to design quantum computing architectures with two-dimensional layouts and low complexity in parity-checking circuitry. Kitaev's surface codes provided the first example of codes satisfying this property. They provided a new route to fault tolerance with more modest overheads and thresholds approaching 1%. The recently discovered color codes share many properties with the surface codes, such as the ability to perform syndrome extraction locally in two dimensions. Some families of color codes admit a transversal implementation of the entire Clifford group. This work investigates color codes on the 4.8.8 lattice known as triangular codes. I develop a fault-tolerant error-correction strategy for these codes in which repeated syndrome measurements on this lattice generate a three-dimensional space-time combinatorial structure. I then develop an integer program that analyzes this structure and determines the most likely set of errors consistent with the observed syndrome values. I implement this integer program to find the threshold for depolarizing noise on small versions of these triangular codes. Because the threshold for magic-state distillation is likely to be higher than this value and because logical CNOT gates can be performed by code deformation in a single block instead of between pairs of blocks, the threshold for fault-tolerant quantum memory for these codes is also the threshold for fault-tolerant quantum computation with them. Since the advent of a threshold theorem for quantum computers much has been improved upon. Thresholds have increased, architectures have become more local, and gate sets have been simplified. The overhead for magic-state distillation has been studied, but not nearly to the extent of the aforementioned topics. A method for greatly reducing this overhead, known as reusable magic states, is studied here. While examples of reusable magic states exist for Clifford gates, I give strong reasons to believe they do not exist for non-Clifford gates.

•Jan 1, 2012•0 citations

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations
Computer architectures which exploit quantum mechanical effects can solve computing tasks that are otherwise impossible to perform. A quantum computer operates on a number of small quantum mechanical systems, known as quantum bits, or qubits. Since these systems are realized on the scale of atoms, they are very prone to errors. Errors occur when the environment interacts with the qubits, a process called decoherence. It is widely accepted that it will not be possible to shield qubits completely from the outside world. If one were to perform a quantum computation on the qubits directly, then after a short period of time the information present in the qubits would be lost. To counter decoherence the state of a qubit can be encoded into multiple physical ones. This is called a quantum error correcting code. Performing quantum error correction allows one to extend the life time of the encoded qubit arbitrarily, assuming that the rate of errors remains below a certain threshold value. The use of quantum codes creates an overhead in resources, as for every logical qubit many more physical qubits are needed. The resource overhead for fault-tolerance is problematic, since realizing qubits will be costly, and in the early stages of building quantum computers the number of physical qubits will be limited. The currently favored coding architecture is the toric code and its variant the surface code in which the physical qubits are put on a square grid in which interactions are only between nearest neighbors. In this thesis we will explore quantum codes in which qubits interact as if they were nearest neighbors in more exotic spaces. In the first part we will consider closed surfaces with constant negative curvature. We show how such surfaces can be constructed and enumerate all quantum codes derived from them which have less than 10.000 physical qubits. For codes that are extremal in a certain sense we perform numerical simulations to determine the value of their threshold. Furthermore, we give evidence that these codes can be used for more overhead efficient storage as compared to the surface code by orders of magnitude. We also show how to read and write the encoded qubits while keeping their connectivity low. In the second part we consider codes in which qubits are layed-out according to a four- dimensional geometry. Such codes allow for much simpler decoding schemes compared to codes which are two-dimensional. In particular, measurements do not necessarily have to be repeated to obtain reliable information about the error and the classical hardware performing the error correction is greatly simplified. We perform numerical simulations to analyze the performance of these codes using decoders based on local updates. We also introduce a novel decoder based on techniques from machine learning and image recognition to decode four-dimensional codes.
PhD thesis investigating homological quantum codes derived from curved and higher dimensional geometries. In the first part we will consider closed surfaces with constant negative curvature. We show how such surfaces can be constructed and enumerate all quantum codes derived from them which have less than 10.000 physical qubits. For codes that are extremal in a certain sense we perform numerical simulations to determine the value of their threshold. Furthermore, we give evidence that these codes can be used for more overhead efficient storage as compared to the surface code by orders of magnitude. We also show how to read and write the encoded qubits while keeping their connectivity low. In the second part we consider codes in which qubits are layed-out according to a four- dimensional geometry. Such codes allow for much simpler decoding schemes compared to codes which are two-dimensional. In particular, measurements do not necessarily have to be repeated to obtain reliable information about the error and the classical hardware performing the error correction is greatly simplified. We perform numerical simulations to analyze the performance of these codes using decoders based on local updates. We also introduce a novel decoder based on techniques from machine learning and image recognition to decode four-dimensional codes.
Quantum computing has the potential to transform information technology by offering algorithms for certain tasks, such as quantum simulation, that are vastly more efficient than what is possible with any classical device. But experimentally implementing practical quantum information processing is a very difficult task. Here we study two important, and closely related, aspects of this challenge: architectures for quantum computing, and quantum error correction Exquisite quantum control has now been achieved in small ion traps, in nitrogen-vacancy centres and in superconducting qubit clusters, but the challenge remains of how to scale these systems to build practical quantum devices. In Part I of this thesis we analyse one approach to building a scalable quantum computer by networking together many simple processor cells, thus avoiding the need to create a single complex structure. The difficulty is that realistic quantum links are very error prone. Here we describe a method by which even these error-prone cells can perform quantum error correction. Groups of cells generate and purify shared resource states, which then enable stabilization of topologically encoded data. Given a realistically noisy network (10% error rate) we find that our protocol can succeed provided that all intra-cell error rates are below 0.8%. Furthermore, we show that with some adjustments, the protocols we employ can be made robust also against high levels of loss in the network interconnects. We go on to analyse the potential running speed of such a device. Using levels of fidelity that are either already achievable in experimental systems, or will be in the near-future, we find that employing a surface code approach in a highly noisy and lossy network architecture can result in kilohertz computer clock speeds. In Part II we consider the question of quantum error correction beyond the surface code. We consider several families of topological codes, and determine the minimum requirements to demonstrate proof-of-principle error suppression in each type of code. A particularly promising code is the gauge color code, which admits a universal transversal gate set. Furthermore, a recent result of Bombin shows the gauge color code supports an error-correction protocol that achieves tolerance to noisy measurements without the need for repeated measurements, so called single-shot error correction. Here, we demonstrate the promise of single-shot error correction by designing a decoder and investigating its performance. We simulate fault-tolerant error correction with the gauge color code, and estimate a sustainable error rate, i.e. the threshold for the long time limit, of ~0.31% for a phenomenological noise model using a simple decoding algorithm.
Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.
Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.
This thesis is a collection of ideas with the general goal of building, at least in the abstract, a local fault-tolerant quantum computer. The connection between quantum information and topology has proven to be an active area of research in several fields. The introduction of the toric code by Alexei Kitaev demonstrated the usefulness of topology for quantum memory and quantum computation. Many quantum codes used for quantum memory are modeled by spin systems on a lattice, with operators that extract syndrome information placed on vertices or faces of the lattice. It is natural to wonder whether the useful codes in such systems can be classified. This thesis presents work that leverages ideas from topology and graph theory to explore the space of such codes. Homological stabilizer codes are introduced and it is shown that, under a set of reasonable assumptions, any qubit homological stabilizer code is equivalent to either a toric code or a color code. Additionally, the toric code and the color code correspond to distinct classes of graphs. Many systems have been proposed as candidate quantum computers. It is very desirable to design quantum computing architectures with two-dimensional layouts and low complexity in parity-checking circuitry. Kitaev's surface codes provided the first example of codes satisfying this property. They provided a new route to fault tolerance with more modest overheads and thresholds approaching 1%. The recently discovered color codes share many properties with the surface codes, such as the ability to perform syndrome extraction locally in two dimensions. Some families of color codes admit a transversal implementation of the entire Clifford group. This work investigates color codes on the 4.8.8 lattice known as triangular codes. I develop a fault-tolerant error-correction strategy for these codes in which repeated syndrome measurements on this lattice generate a three-dimensional space-time combinatorial structure. I then develop an integer program that analyzes this structure and determines the most likely set of errors consistent with the observed syndrome values. I implement this integer program to find the threshold for depolarizing noise on small versions of these triangular codes. Because the threshold for magic-state distillation is likely to be higher than this value and because logical CNOT gates can be performed by code deformation in a single block instead of between pairs of blocks, the threshold for fault-tolerant quantum memory for these codes is also the threshold for fault-tolerant quantum computation with them. Since the advent of a threshold theorem for quantum computers much has been improved upon. Thresholds have increased, architectures have become more local, and gate sets have been simplified. The overhead for magic-state distillation has been studied, but not nearly to the extent of the aforementioned topics. A method for greatly reducing this overhead, known as reusable magic states, is studied here. While examples of reusable magic states exist for Clifford gates, I give strong reasons to believe they do not exist for non-Clifford gates.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.