Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Streamlining a Cold-Atom Experiment

Marius Gächter

Published Aug 30, 2021• 0 citations
Publisher

Abstract

Streamlining a Cold-Atom Experimentby Marius GÄCHTER Cold-atom based experiments for quantum simulation are very sophisticated machines with many parameters, which require a lot of configuration and calibration before every measurement.Their complexity is furthermore steadily growing with the advancements of the field.This development even has the power to render certain experiments practically infeasible as the preparatory steps required keep prolonging and delaying the actual measurements.This thesis addresses this major problem by exploring different strategies to streamline and automatize the preparatory configuration and calibration steps in the Cavity Experiment at ETH Zurich.These strategies are mainly based on technological advancements in machine learning and computing power in general, which have been made in the time since the inception of the field of cold gases more than twenty years ago.In Part I, we streamline standard experimental techniques for optical lattice calibration, spin preparation and imaging.In Part II, we implement a versatile optimization framework and connect it to our experimental setup.This offers manifold possibilities, which we showcase by letting the optimization algorithm find optical evaporation ramps to produce a Bose-Einstein condensate, without giving it prior knowledge about the system.The techniques developed in the framework of this thesis can be readily extended and applied to other state of the art cold-atom experiments.

DOI
10.3929/ethz-b-000504567

Related papers

Machine learning applications in cold atom quantum simulators

Henning Schlömer, Annabelle Bohrdt

As ultracold atom experiments become highly controlled and scalable quantum simulators, they require sophisticated control over high-dimensional parameter spaces and generate increasingly complex measurement data that need to be analyzed and interpreted efficiently. Machine learning (ML) techniques have been established as versatile tools for addressing these challenges, offering strategies for data interpretation, experimental control, and theoretical modeling. In this review, we provide a perspective on how machine learning is being applied across various aspects of quantum simulation, with a focus on cold atomic systems. Emphasis is placed on practical use cases -- from classifying many-body phases to optimizing experimental protocols and representing quantum states -- highlighting the specific contexts in which different ML approaches prove effective. Rather than presenting algorithmic details, we focus on the physical insights enabled by ML and the kinds of problems in quantum simulation where these methods offer tangible benefits.

arXiv:2509.08011•Sep 8, 2025•3 citations

A new setup and methods for the fast production of ultracold atoms for atom-ion experiments

Federico Berto

Isolated quantum systems offer an ideal platform to study fundamental aspects of quantum physics and test emergent technological applications.Recent improvements in experimental techniques have made it possible to join different quantum systems in a single experimental setup, allowing for the study of their interaction and their enriched dynamics.Hybrid quantum systems of atoms and ions aim at bringing together ultracold atoms, which constitute the ideal playground for studying many-body physics, and trapped ions, which represent the ideal individual isolated quantum system.In these setups a key emerging feature is the atom-ion interaction, which originates from the dipole induced by the ion's charge on the approaching atom.Atom-ion systems have been proposed for a number of different experiments in the fields of quantum computation, quantum simulation, astrophysics, quantum chemistry, and metrology.Atom-ion quantum systems require the integration of two complex setups, each dedicated to producing either cold atoms or cold ions.These two particles have considerable different production time scales: on the one hand, ions are generally produced by photo-ionization of hot atoms, and are trapped in deep Radio Frequency (RF) traps where fast cooling techniques (such as sideband cooling) are employed to bring the ion to its ground state of motion.The whole process can be completed in less than a second; furthermore, the same ion can be cooled and reused multiple times in an experiment.On the other hand, atoms must be first slowed and trapped using magneto-optical techniques, and are brought to degeneracy using evaporative cooling.In general, this process can take up to tens of seconds.Therefore, the preparation of a cold cloud of neutral atoms represent the major bottleneck to achieve a high repetition rate to perform repeated measures.For this reason, the development of new fast cooling techniques is a necessary step to streamline the experimental procedure in atomic physics setups.This thesis examines a novel scheme for the fast cooling of neutral 6 Li atoms.This new cooling scheme makes use of deep optical potentials generated using a cavity-enhanced optical lattice and resolved single-photon sideband cooling to cool particles toward their ground state of motion.First, a mathematical model of sideband cooling in optical potentials is developed.The model describes the vibrational state of particles trapped in non-harmonic state-dependent optical potentials.iii Numeric simulations performed using wavefunction Monte Carlo show that, in experimentally feasible conditions, it is possible to reduce the particles' vibrational energy by more than 95 % of its initial value using a laser frequency sweep a few ms long.A two-mirror high-finesse optical resonator was designed to be used for sideband cooling and evaporative cooling of the 6 Li atoms.The resonator is made of vacuumcompatible materials and it is installed inside the chamber where 6 Li atoms are prepared.The assembled resonator was characterized using optical techniques: the cavity finesse and linewidth were determined to be 28 800(80) and 78.6(2) kHz, respectively.Thanks to such a high finesse, a low-power laser diode coupled to the cavity can achieve an optical lattice sufficiently deep to perform single-photon sideband cooling.Due to the small cavity linewidth, considerable work has been done to characterize the coupled laser and its noise power spectrum.ix C RWA and rotating-frame transformation C.1 Rotating wave approximation (RWA) . . . . . . .

•Apr 12, 2022•0 citations

Fast machine-learning online optimization of ultra-cold-atom experiments

P. B. Wigley, P. J. Everitt, Anton van den Hengel +12 more

We apply an online optimization process based on machine learning to the production of Bose-Einstein condensates (BEC). BEC is typically created with an exponential evaporation ramp that is optimal for ergodic dynamics with two-body s-wave interactions and no other loss rates, but likely sub-optimal for real experiments. Through repeated machine-controlled scientific experimentation and observations our 'learner' discovers an optimal evaporation ramp for BEC production. In contrast to previous work, our learner uses a Gaussian process to develop a statistical model of the relationship between the parameters it controls and the quality of the BEC produced. We demonstrate that the Gaussian process machine learner is able to discover a ramp that produces high quality BECs in 10 times fewer iterations than a previously used online optimization technique. Furthermore, we show the internal model developed can be used to determine which parameters are essential in BEC creation and which are unimportant, providing insight into the optimization process of the system.

arXiv:1507.04964•Scientific Reports•May 16, 2016•243 citations

Review and experimental benchmarking of machine learning algorithms for efficient optimization of cold atom experiments

Oliver Anton, Victoria Henderson, Elisa Da Ros +4 more

Abstract The generation of cold atom clouds is a complex process which involves the optimization of noisy data in high dimensional parameter spaces. Optimization can be challenging both in and especially outside of the lab due to lack of time, expertise, or access for lengthy manual optimization. In recent years, it was demonstrated that machine learning offers a solution since it can optimize high dimensional problems quickly, without knowledge of the experiment itself. In this paper we present results showing the benchmarking of nine different optimization techniques and implementations, alongside their ability to optimize a rubidium (Rb) cold atom experiment. The investigations are performed on a 3D 87Rb molasses with 10 and 18 adjustable parameters, respectively, where the atom number obtained by absorption imaging was chosen as the test problem. We further compare the best performing optimizers under different effective noise conditions by reducing the signal-to-noise ratio of the images via adapting the atomic vapor pressure in the 2D+ magneto-optical trap and the detection laser frequency stability.

arXiv:2312.13397•Machine Learning Science and Technology•Apr 9, 2024•9 citations

Can machine learning for quantum-gas experiments be explainable?

I. B. Spielman amd J. P. Zwolak

Virtually all aspects of many-body atomic physics are challenging: experiments are technically demanding, datasets have become enormous, and the memory and CPU requirements for classical simulation of generic quantum systems often scale exponentially with system size. Machine learning (ML) methods are already assisting in each of these areas and are poised to become transformative. Here, we focus on two specific applications of ML to cold-atom-based quantum simulators. These devices generally generate data in the form of images; we first showcase denoising of raw images and then identify solitonic waves in Bose-Einstein condensates. In both of these examples, we comment on the interplay between performance, model complexity, and interpretability.

cond-mat.quant-gasCross-listedarXiv:2605.18689•May 19, 2026•0 citations

Progress towards a quantum simulator with cold atoms

Marisa Perea-Ortiz

This thesis presents work toward a quantum simulator with cold atoms. Characteristic and defining subsystems of the experimental setup are presented. Among them there are: the self-made viewports for ultra-high vacuum using indium seals, work on a modular laser system, for laser cooling, with miniaturised optics for the optimization of double path acusto-optic modulator. Work on a computer control to implement past slot is also presented. \nA versatile detection system for absorption imaging was designed and built. This detection system is stable, easy to align and exchange of magnification is simple. As well, a high resolution imaging system was designed, built and tested. This imaging system uses commercial microscope objectives and has been designed to work with four different microscope objective. Magnification of 5x, 10x 20x and 50x are possible. With the maximum magnification of 50x a resolution of 1.74μm for 780nm was achieved. Also a camera control for in-situ absorption imaging was programmed. Calculation of number of atoms and temperature were implemented in the program, as well as a defringing algorithm. \nA new method for temperature calculation for atoms held in a magnetic quadrupole trap was developed and tested, giving similar calculation of temperature as the commonly known time of flight (TOF) method. It is shown that this new method gives better results than the common TOF method for short time of flight. \nCharacterization of atom losses and heating in the production of a Bose-Einstein condensate were performed.

•Jul 1, 2015•1 citation
Streamlining a Cold-Atom Experimentby Marius GÄCHTER Cold-atom based experiments for quantum simulation are very sophisticated machines with many parameters, which require a lot of configuration and calibration before every measurement.Their complexity is furthermore steadily growing with the advancements of the field.This development even has the power to render certain experiments practically infeasible as the preparatory steps required keep prolonging and delaying the actual measurements.This thesis addresses this major problem by exploring different strategies to streamline and automatize the preparatory configuration and calibration steps in the Cavity Experiment at ETH Zurich.These strategies are mainly based on technological advancements in machine learning and computing power in general, which have been made in the time since the inception of the field of cold gases more than twenty years ago.In Part I, we streamline standard experimental techniques for optical lattice calibration, spin preparation and imaging.In Part II, we implement a versatile optimization framework and connect it to our experimental setup.This offers manifold possibilities, which we showcase by letting the optimization algorithm find optical evaporation ramps to produce a Bose-Einstein condensate, without giving it prior knowledge about the system.The techniques developed in the framework of this thesis can be readily extended and applied to other state of the art cold-atom experiments.
As ultracold atom experiments become highly controlled and scalable quantum simulators, they require sophisticated control over high-dimensional parameter spaces and generate increasingly complex measurement data that need to be analyzed and interpreted efficiently. Machine learning (ML) techniques have been established as versatile tools for addressing these challenges, offering strategies for data interpretation, experimental control, and theoretical modeling. In this review, we provide a perspective on how machine learning is being applied across various aspects of quantum simulation, with a focus on cold atomic systems. Emphasis is placed on practical use cases -- from classifying many-body phases to optimizing experimental protocols and representing quantum states -- highlighting the specific contexts in which different ML approaches prove effective. Rather than presenting algorithmic details, we focus on the physical insights enabled by ML and the kinds of problems in quantum simulation where these methods offer tangible benefits.
Isolated quantum systems offer an ideal platform to study fundamental aspects of quantum physics and test emergent technological applications.Recent improvements in experimental techniques have made it possible to join different quantum systems in a single experimental setup, allowing for the study of their interaction and their enriched dynamics.Hybrid quantum systems of atoms and ions aim at bringing together ultracold atoms, which constitute the ideal playground for studying many-body physics, and trapped ions, which represent the ideal individual isolated quantum system.In these setups a key emerging feature is the atom-ion interaction, which originates from the dipole induced by the ion's charge on the approaching atom.Atom-ion systems have been proposed for a number of different experiments in the fields of quantum computation, quantum simulation, astrophysics, quantum chemistry, and metrology.Atom-ion quantum systems require the integration of two complex setups, each dedicated to producing either cold atoms or cold ions.These two particles have considerable different production time scales: on the one hand, ions are generally produced by photo-ionization of hot atoms, and are trapped in deep Radio Frequency (RF) traps where fast cooling techniques (such as sideband cooling) are employed to bring the ion to its ground state of motion.The whole process can be completed in less than a second; furthermore, the same ion can be cooled and reused multiple times in an experiment.On the other hand, atoms must be first slowed and trapped using magneto-optical techniques, and are brought to degeneracy using evaporative cooling.In general, this process can take up to tens of seconds.Therefore, the preparation of a cold cloud of neutral atoms represent the major bottleneck to achieve a high repetition rate to perform repeated measures.For this reason, the development of new fast cooling techniques is a necessary step to streamline the experimental procedure in atomic physics setups.This thesis examines a novel scheme for the fast cooling of neutral 6 Li atoms.This new cooling scheme makes use of deep optical potentials generated using a cavity-enhanced optical lattice and resolved single-photon sideband cooling to cool particles toward their ground state of motion.First, a mathematical model of sideband cooling in optical potentials is developed.The model describes the vibrational state of particles trapped in non-harmonic state-dependent optical potentials.iii Numeric simulations performed using wavefunction Monte Carlo show that, in experimentally feasible conditions, it is possible to reduce the particles' vibrational energy by more than 95 % of its initial value using a laser frequency sweep a few ms long.A two-mirror high-finesse optical resonator was designed to be used for sideband cooling and evaporative cooling of the 6 Li atoms.The resonator is made of vacuumcompatible materials and it is installed inside the chamber where 6 Li atoms are prepared.The assembled resonator was characterized using optical techniques: the cavity finesse and linewidth were determined to be 28 800(80) and 78.6(2) kHz, respectively.Thanks to such a high finesse, a low-power laser diode coupled to the cavity can achieve an optical lattice sufficiently deep to perform single-photon sideband cooling.Due to the small cavity linewidth, considerable work has been done to characterize the coupled laser and its noise power spectrum.ix C RWA and rotating-frame transformation C.1 Rotating wave approximation (RWA) . . . . . . .
We apply an online optimization process based on machine learning to the production of Bose-Einstein condensates (BEC). BEC is typically created with an exponential evaporation ramp that is optimal for ergodic dynamics with two-body s-wave interactions and no other loss rates, but likely sub-optimal for real experiments. Through repeated machine-controlled scientific experimentation and observations our 'learner' discovers an optimal evaporation ramp for BEC production. In contrast to previous work, our learner uses a Gaussian process to develop a statistical model of the relationship between the parameters it controls and the quality of the BEC produced. We demonstrate that the Gaussian process machine learner is able to discover a ramp that produces high quality BECs in 10 times fewer iterations than a previously used online optimization technique. Furthermore, we show the internal model developed can be used to determine which parameters are essential in BEC creation and which are unimportant, providing insight into the optimization process of the system.
Abstract The generation of cold atom clouds is a complex process which involves the optimization of noisy data in high dimensional parameter spaces. Optimization can be challenging both in and especially outside of the lab due to lack of time, expertise, or access for lengthy manual optimization. In recent years, it was demonstrated that machine learning offers a solution since it can optimize high dimensional problems quickly, without knowledge of the experiment itself. In this paper we present results showing the benchmarking of nine different optimization techniques and implementations, alongside their ability to optimize a rubidium (Rb) cold atom experiment. The investigations are performed on a 3D 87Rb molasses with 10 and 18 adjustable parameters, respectively, where the atom number obtained by absorption imaging was chosen as the test problem. We further compare the best performing optimizers under different effective noise conditions by reducing the signal-to-noise ratio of the images via adapting the atomic vapor pressure in the 2D+ magneto-optical trap and the detection laser frequency stability.
Virtually all aspects of many-body atomic physics are challenging: experiments are technically demanding, datasets have become enormous, and the memory and CPU requirements for classical simulation of generic quantum systems often scale exponentially with system size. Machine learning (ML) methods are already assisting in each of these areas and are poised to become transformative. Here, we focus on two specific applications of ML to cold-atom-based quantum simulators. These devices generally generate data in the form of images; we first showcase denoising of raw images and then identify solitonic waves in Bose-Einstein condensates. In both of these examples, we comment on the interplay between performance, model complexity, and interpretability.
This thesis presents work toward a quantum simulator with cold atoms. Characteristic and defining subsystems of the experimental setup are presented. Among them there are: the self-made viewports for ultra-high vacuum using indium seals, work on a modular laser system, for laser cooling, with miniaturised optics for the optimization of double path acusto-optic modulator. Work on a computer control to implement past slot is also presented. \nA versatile detection system for absorption imaging was designed and built. This detection system is stable, easy to align and exchange of magnification is simple. As well, a high resolution imaging system was designed, built and tested. This imaging system uses commercial microscope objectives and has been designed to work with four different microscope objective. Magnification of 5x, 10x 20x and 50x are possible. With the maximum magnification of 50x a resolution of 1.74μm for 780nm was achieved. Also a camera control for in-situ absorption imaging was programmed. Calculation of number of atoms and temperature were implemented in the program, as well as a defringing algorithm. \nA new method for temperature calculation for atoms held in a magnetic quadrupole trap was developed and tested, giving similar calculation of temperature as the commonly known time of flight (TOF) method. It is shown that this new method gives better results than the common TOF method for short time of flight. \nCharacterization of atom losses and heating in the production of a Bose-Einstein condensate were performed.