Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Emerging Imaging and Sensing Technologies for Security and Defence

Quantum lidar using stationary broadband light

Peng Kian Tan, Xi Jie Yeo, Li Jiong Shen, Christian Kurtsiefer

Published Sep 8, 2021• 1 citation
Publisher

Abstract

Conventional optical ranging techniques require timing modulated light sources to provide for the time-of-flight information, which may allow for detection, jamming or decoy by a third-party with information to the modulation pattern. Quantum ranging techniques, or quantum lidar, use spontaneous parametric down converted light sources to provide the timing correlation, where entanglement is not necessarily exploited in the simplementation, and is complex and expensive. Here we propose the use of stationary broadband light generated from a laser diode operating below threshold to provide the timing correlation, as extracted from thermal photon bunching.

DOI
10.1117/12.2593008

Related papers

Optical Ranging using a Subthreshold Laser Diode

Peng Kian Tan, Christian Kurtsiefer

We demonstrate an optical ranging technique using stationary light implemented on a semiconductor laser diode operating below threshold, with the required time-of-flight information extracted from thermal photon bunching. In contrast, conventional ranging techniques require a light source to be timing modulated in intensity, phase, or frequency, with which to correlate the reference and probe-to-target beams. This reference-probe correlation provides for time-of-flight information from which the target distance can then be measured. Presently, quantum ranging schemes derive timing correlation information from spontaneous parametric down-conversion sources which need not be timing modulated [1] , [2] . However, such light sources are complex and expensive to construct.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•0 citations

Quantum sensing using thermal photon bunching

Peng Kian Tan, Xi Jie Yeo, Li Jiong Shen +1 more

Classical sensing techniques such as range finding and clock synchronization use timing modulated light sources to provide the timing correlations needed for their implementation. Corresponding quantum schemes utilise spontaneous parametric down converted light sources to provide the timing correlations without the need for timing modulation, although entangled states are too fragile to be fully exploited presently. Here we demonstrate the use of thermal light as an alternative source for timing correlations, via the photon bunching generated from a laser operating below threshold, and showcase its practical viability by successful range finding measurements.

Quantum Communications and Quantum Imaging•Jul 30, 2021•0 citations

Light detection and ranging with entangled photons

Jiuxuan Zhao, Ashley Lyons, Arin Can Ülkü +3 more

Single-photon light detection and ranging (LiDAR) is a key technology for depth imaging through complex environments. Despite recent advances, an open challenge is the ability to isolate the LiDAR signal from other spurious sources including background light and jamming signals. Here we show that a time-resolved coincidence scheme can address these challenges by exploiting spatio-temporal correlations between entangled photon pairs. We demonstrate that a photon-pair-based LiDAR can distill desired depth information in the presence of both synchronous and asynchronous spurious signals without prior knowledge of the scene and the target object. This result enables the development of robust and secure quantum LiDAR systems and paves the way to time-resolved quantum imaging applications.

arXiv:2105.07169•Optics Express•Jan 12, 2022•52 citations

Comparison and limitations of quantum lidar in the single-photon regime

Anthony Drouin, Jean-Philippe Bourgoin, Sara Hosseini +3 more

Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.

Optica Quantum•Sep 17, 2026•0 citations

Proof-of-principle demonstration of quantum Lidar using bunching effect

Si Shen, Zichang Zhang, Mengke Cai +6 more

This paper proposes a novel quantum lidar scheme based on the bunching effect of thermal light. By utilizing signal photons of the correlated photons via pulsed-pumped periodically poled lithium niobate (PPLN) waveguide, the system achieves a ranging precision of 156ps (corresponding to 4.7cm) with unambiguous distance measurement. Furthermore, by employing thermal light with the coherence time on the femtosecond scale, the ranging precision can be enhanced to the micrometer level. The proposed technique holds significant potential for applications in high-precision metrology, quantum imaging, and remote sensing, paving the way for future advancements in optical ranging technologies.

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications•May 11, 2026•0 citations

Research progress of quantum LiDAR with ranging and velocity measurement

Zhengdong Liu, Mingda Huang, Kuoliang Li +2 more

Light Detection and Ranging (LiDAR) has emerged as a pivotal sensor across diverse domains such as autonomous driving, mapping, and remote sensing, owing to its exceptional orientation capabilities and high resolution. The detection mechanism of LiDAR is fundamentally categorized into non-coherent detection and coherent detection. Non-coherent detection employs the direct detection method, which involves measuring changes in the intensity of the reflected light signal to achieve detection. Pulse LiDAR, which determines the target range through pulsed time-of-flight measurements, falls within this classification. On the other hand, coherent detection employs heterodyne detection techniques and achieves detection by measuring the frequency or phase difference between the echo signal and the local oscillator signal. This approach is utilized in frequency modulation continuous wave (FMCW) LiDAR and Doppler speed LiDAR. LiDAR systems employing coherent detection methods can attain heightened sensitivity while operating at lower transmission power levels. However, due to the limitations posed by quantum noise, conventional LiDAR systems have encountered challenges in terms of detection sensitivity and resolution, prompting the need for advancement. In recent times, spurred by the emergence of quantum metrology, a quantum version of LiDAR has been conceptualized, promising superior precision and resolution. Leveraging the enhanced signal-to-noise ratio made possible by quantum advancements, quantum LiDAR demonstrates the potential to extend detection ranges, elevate detection accuracy, bolster anti-jamming capabilities, and enhance anti-stealth performance beyond that of classical LiDAR, all while operating at equivalent transmission signal power levels. As an emerging technology, quantum LiDAR is currently in its exploratory phase, and several challenges must be confronted prior to its practical implementation. These challenges encompass a restricted array of methods for the effective generation of quantum light sources, the vulnerability of quantum states to environmental factors, resulting in their deterioration, the constrained techniques for modulating quantum light sources, and the critical necessity to augment detector sensitivity. Furthermore, present quantum LiDAR efforts primarily concentrate on imaging and ranging capabilities, with limited research dedicated to simultaneous velocity measurement and ranging. Hence, forthcoming investigations into quantum LiDAR will center around optimizing quantum light source efficiency, exploring high-dimensional modulation techniques, and advancing high-sensitivity detectors. These efforts aim to enhance system stability and enable miniaturization, ultimately leading to superior target detection performance. This review centers on the evaluation of ranging and velocity measurement performance within quantum LiDAR systems. Following a concise introduction to two renowned categories of classical LiDAR—namely, pulse LiDAR and FMCW LiDAR, the paper delves into the progress made in quantum pulsed LiDAR and quantum interferometric LiDAR. In particular, this review highlights the advancements in quantum FMCW LiDAR, a system proposed for achieving simultaneous range and velocity measurements with quantum enhancement. By conducting a thorough assessment of the current accomplishments in quantum LiDAR research, the study seeks to attain a more profound comprehension of prevailing research focal points and obstacles, thus offering invaluable insights to steer its prospective advancement.

Chinese Science Bulletin (Chinese Version)•Sep 15, 2023•2 citations
Conventional optical ranging techniques require timing modulated light sources to provide for the time-of-flight information, which may allow for detection, jamming or decoy by a third-party with information to the modulation pattern. Quantum ranging techniques, or quantum lidar, use spontaneous parametric down converted light sources to provide the timing correlation, where entanglement is not necessarily exploited in the simplementation, and is complex and expensive. Here we propose the use of stationary broadband light generated from a laser diode operating below threshold to provide the timing correlation, as extracted from thermal photon bunching.
We demonstrate an optical ranging technique using stationary light implemented on a semiconductor laser diode operating below threshold, with the required time-of-flight information extracted from thermal photon bunching. In contrast, conventional ranging techniques require a light source to be timing modulated in intensity, phase, or frequency, with which to correlate the reference and probe-to-target beams. This reference-probe correlation provides for time-of-flight information from which the target distance can then be measured. Presently, quantum ranging schemes derive timing correlation information from spontaneous parametric down-conversion sources which need not be timing modulated [1] , [2] . However, such light sources are complex and expensive to construct.
Classical sensing techniques such as range finding and clock synchronization use timing modulated light sources to provide the timing correlations needed for their implementation. Corresponding quantum schemes utilise spontaneous parametric down converted light sources to provide the timing correlations without the need for timing modulation, although entangled states are too fragile to be fully exploited presently. Here we demonstrate the use of thermal light as an alternative source for timing correlations, via the photon bunching generated from a laser operating below threshold, and showcase its practical viability by successful range finding measurements.
Single-photon light detection and ranging (LiDAR) is a key technology for depth imaging through complex environments. Despite recent advances, an open challenge is the ability to isolate the LiDAR signal from other spurious sources including background light and jamming signals. Here we show that a time-resolved coincidence scheme can address these challenges by exploiting spatio-temporal correlations between entangled photon pairs. We demonstrate that a photon-pair-based LiDAR can distill desired depth information in the presence of both synchronous and asynchronous spurious signals without prior knowledge of the scene and the target object. This result enables the development of robust and secure quantum LiDAR systems and paves the way to time-resolved quantum imaging applications.
Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.
This paper proposes a novel quantum lidar scheme based on the bunching effect of thermal light. By utilizing signal photons of the correlated photons via pulsed-pumped periodically poled lithium niobate (PPLN) waveguide, the system achieves a ranging precision of 156ps (corresponding to 4.7cm) with unambiguous distance measurement. Furthermore, by employing thermal light with the coherence time on the femtosecond scale, the ranging precision can be enhanced to the micrometer level. The proposed technique holds significant potential for applications in high-precision metrology, quantum imaging, and remote sensing, paving the way for future advancements in optical ranging technologies.
Light Detection and Ranging (LiDAR) has emerged as a pivotal sensor across diverse domains such as autonomous driving, mapping, and remote sensing, owing to its exceptional orientation capabilities and high resolution. The detection mechanism of LiDAR is fundamentally categorized into non-coherent detection and coherent detection. Non-coherent detection employs the direct detection method, which involves measuring changes in the intensity of the reflected light signal to achieve detection. Pulse LiDAR, which determines the target range through pulsed time-of-flight measurements, falls within this classification. On the other hand, coherent detection employs heterodyne detection techniques and achieves detection by measuring the frequency or phase difference between the echo signal and the local oscillator signal. This approach is utilized in frequency modulation continuous wave (FMCW) LiDAR and Doppler speed LiDAR. LiDAR systems employing coherent detection methods can attain heightened sensitivity while operating at lower transmission power levels. However, due to the limitations posed by quantum noise, conventional LiDAR systems have encountered challenges in terms of detection sensitivity and resolution, prompting the need for advancement. In recent times, spurred by the emergence of quantum metrology, a quantum version of LiDAR has been conceptualized, promising superior precision and resolution. Leveraging the enhanced signal-to-noise ratio made possible by quantum advancements, quantum LiDAR demonstrates the potential to extend detection ranges, elevate detection accuracy, bolster anti-jamming capabilities, and enhance anti-stealth performance beyond that of classical LiDAR, all while operating at equivalent transmission signal power levels. As an emerging technology, quantum LiDAR is currently in its exploratory phase, and several challenges must be confronted prior to its practical implementation. These challenges encompass a restricted array of methods for the effective generation of quantum light sources, the vulnerability of quantum states to environmental factors, resulting in their deterioration, the constrained techniques for modulating quantum light sources, and the critical necessity to augment detector sensitivity. Furthermore, present quantum LiDAR efforts primarily concentrate on imaging and ranging capabilities, with limited research dedicated to simultaneous velocity measurement and ranging. Hence, forthcoming investigations into quantum LiDAR will center around optimizing quantum light source efficiency, exploring high-dimensional modulation techniques, and advancing high-sensitivity detectors. These efforts aim to enhance system stability and enable miniaturization, ultimately leading to superior target detection performance. This review centers on the evaluation of ranging and velocity measurement performance within quantum LiDAR systems. Following a concise introduction to two renowned categories of classical LiDAR—namely, pulse LiDAR and FMCW LiDAR, the paper delves into the progress made in quantum pulsed LiDAR and quantum interferometric LiDAR. In particular, this review highlights the advancements in quantum FMCW LiDAR, a system proposed for achieving simultaneous range and velocity measurements with quantum enhancement. By conducting a thorough assessment of the current accomplishments in quantum LiDAR research, the study seeks to attain a more profound comprehension of prevailing research focal points and obstacles, thus offering invaluable insights to steer its prospective advancement.