Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Mott transition of fermions in anisotropic ruby lattice

An Bao

Published Jan 1, 2021• 0 citations
Publisher

Abstract

In this work, the Hubbard model is adopted to describe fermions with on-site repulsive interaction and the nearest-neighbor hopping in anisotropic ruby lattice. The combination of cluster dynamical mean field theory and continuous-time quantum Monte Carlo algorithm is used to solve the theoretical model. It is widely accepted that the density of states and the double occupancy are two important quantities for determining the phase transition of two-dimensional strongly correlated system. Therefore, based on the self-consistent calculation, using the maximum entropy method to calculate the single particle density of states and double occupancy of fermions in anisotropic ruby lattice. Here in this work, there are 6 sites in a cluster. The influences of temperature, interaction and anisotropic parameter on metal-insulator phase transition of fermions in anisotropic ruby lattice are discussed based on the calculations of single particle density of state and double occupancy. Finally, the metal-Mott insulator phase diagram which shows the competition between temperature and on-site repulsive interaction in the phase transition of fermions in anisotropic ruby lattice is presented. The results shows that the system is in metallic state for the regime of weak interaction and low temperature, and the Mott insulator appears in the regime of strong interaction and high temperature. The metallic state and Mott insulating one are separated by the second-order transition line in the phase diagram.

DOI
10.7498/aps.70.20210963

Related papers

Mott transition in ruby lattice Hubbard model*

An Bao

Abstract Mott transition in a ruby lattice with fermions described by the Hubbard model including on-site repulsive interaction is investigated by combining the cellular dynamical mean-field theory and the continuous-time quantum Monte Carlo algorithm. The effect of temperature and on-site repulsive interaction on the metallic–insulating phase transition in ruby lattice with fermions is discussed based on the density of states and double occupancy. In addition, the magnetic property of each phase is discussed by defining certain magnetic order parameters. Our results show that the antiferromagnetic metal is found at the low temperature and weak interaction region and the antiferromagnetic insulating phase is found at the low temperature and strong interaction region. The paramagnetic metal appears in whole on-site repulsive interaction region when the temperature is higher than a certain value and the paramagnetic insulator appears at the middle scale of temperature and on-site repulsive interaction.

Chinese Physics B•May 1, 2019•3 citations

Effect of interaction and temperature on quantum phase transition in anisotropic square-octagon lattice

An Bao, Xuefeng Zhang, Xiaozhong Zhang

We investigate the effect of interaction, temperature, and anisotropic parameter on the quantum phase transitions in an anisotropic square-octagon lattice with fermions under the framework of the single band Hubbard model through using the combination of cellular dynamical mean field theory and a continuous time Monte Carlo algorithm. The competition between interaction and temperature shows that with the increase of the anisotropic parameter, the critical on-site repulsive interaction for the metal–insulator transition increases for fixed temperature. The interaction–anisotropic parameter phase diagram reveals that with the decrease of temperature, the critical anisotropic parameter for the Mott transition will increase for fixed interaction cases.

Chinese Physics B•Apr 30, 2015•10 citations

Kondo metal of fermionic atoms in anisotropic triangular optical lattice

Bao-an, Xiaozhong Zhang, Wu‐Ming Liu

Quantum phase transition of fermionic atoms in anisotropic triangular optical lattice was investigated by dynamical cluster approximation combining with continuous time quantum Monte Carlo algorithm. The temperature-interaction phase diagram for different hoping terms and the competition between the anisotropic parameter and interaction is presented. Our results show that the system undergoes Mott transition from Fermi liquid to Mott insulator while the repulsive interaction reach the critical value. The Kondo metal characterized by Kondo peak in the density of states is found in this systems and the pseudogap are suppressed at low temperature due to the Kondo effect. We also propose a feasible experiment protocol to observe these phenomenon in the anisotropic triangular optical lattice with the cold atoms, in which the hoping terms can be varied by the lattice depth and the atomic interaction can be adjusted via Feshbach resonance.

arXiv:1212.2751•Dec 12, 2012•0 citations

Quantum phase transitions in two-dimensional strongly correlated fermion systems

An Bao, Yao‐Hua Chen, Heng-Fu Lin +2 more

In this article, we review our recent work on quantum phase transition in two-dimensional strongly correlated fermion systems. We discuss the metal–insulator transition properties of these systems by calculating the density of states, double occupancy, and Fermi surface evolution using a combination of the cellular dynamical mean-field theory (CDMFT) and the continuous-time quantum Monte Carlo algorithm. Furthermore, we explore the magnetic properties of each state by defining magnetic order parameters. Rich phase diagrams with many intriguing quantum states, including antiferromagnetic metal, paramagnetic metal, Kondo metal, and ferromagnetic insulator, were found for the two-dimensional lattices with strongly correlated fermions. We believe that our results would lead to a better understanding of the properties of real materials.

Frontiers of Physics•Oct 1, 2015•6 citations

Correlation driven Mott-insulator-to-metal transition

Rubem Mondaini, Thereza Paiva

We study transport properties of the half-filled two-dimensional (2D) Hubbard model with spatially varying interactions, where a pattern of interacting and non-interacting sites is formed. We use Determinantal Quantum Monte Carlo method to calculate the double occupation, effective hopping and Drude weight. These data point to two phase transitions, driven by fermionic correlations. The first is the expected metal to a Mott insulating state. The second one, is an exotic transition from a Mott insulating state to a highly anisotropic metal, that takes place at large values of the fermion-fermion interaction. This second transition occurs when the layers formed by the spatially varying interactions decouple due to the suppression of the hopping between interacting and non-interacting sites, leading to fermionic transport along the non-interacting ones.

arXiv:1303.7369•Mar 29, 2013•0 citations

Mott Physics in Multicomponent Systems

김아람

We investigate Hubbard-type models by means of the dynamical mean-field theory (DMFT) combined with the continuous-time quantum Monte Carlo (CTQMC) method. In this thesis, a great deal of effort has been devoted to investigating diverse facets of Mott physics. Interesting phenomena in strongly correlated electron systems emerge mostly when various energy scales compete with each other. We introduce additional degrees of freedom to the standard Hubbard model. The additional degrees of freedom include a staggered lattice potential, two orbitals, bilayer structure, and superconductivity. Depending on the model system, we extend the single-site DMFT to the multi-orbital one or employ cluster extension of the DMFT. In addition, two complementary versions of CTQMC, weak and strong coupling algorithm, are adopted as an impurity solver.\nWe first consider a Mott transition of the Hubbard model in infinite dimensions. The DMFT is employed in combination with the CTQMC method for an accurate description at low temperatures. Through the use of the double occupancy and the energy density, which are directly measured via the CTQMC method, we construct the phase diagram. We pay particular attention to the construction of the first-order phase transition line (PTL) in the coexistence region of metallic and insulating phases. The resulting PTL is found to exhibit reasonable agreement with earlier finite-temperature results. We also show, by including systematically low-temperature data, that the PTL, which is obtained independently of the previous zero-temperature results, approaches monotonically the transition point reported in earlier zero-temperature studies.\nWe next investigate paramagnetic metal-insulator transitions in the infinite-dimensional ionic Hubbard model at finite temperatures. By means of the DMFT with an impurity solver of the CTQMC, we show that an increase in the interaction strength brings about a crossover from a band insulating phase to a metallic one, followed by a first-order transition to the Mott insulating phase. The first-order transition turns into a crossover above a certain critical temperature, which becomes higher as the strength of the staggered lattice potential is increased. Further, analysis of the temperature dependence of the energy density discloses that the intermediate metallic phase is a Fermi liquid. It is also found that the metallic phase is stable against strong staggered potentials even at very low temperatures. \nFinite-temperature phase transitions are also examined in the two-orbital Hubbard model with Ising-type Hunds coupling. We adopt the multi-orbital extension of the DMFT combined with the strong coupling CTQMC. It is found that there emerges a peculiar reverse-sloped first-order Mott transition between the orbital-selective Mott phase and the Mott insulator phase. It turns out that the increase of Hunds coupling lowers the critical temperature of the reverse-sloped Mott transition. Beyond a certain critical value of Hunds coupling the first-order transition becomes a finite-temperature crossover.\nBilayer effects in the Hubbard model are also studied in the dynamical cluster approximation (DCA) combined with the weak coupling algorithm of CTQMC. In the magnetic phase diagrams obtained in earlier studies, there still remain several controversial issues, particularly for weak on-site Coulomb interactions. In this study, we adopt eight-site clusters which preserve the underlying lattice symmetry. Magnetic properties and associated metal-insulator transitions are examined at low temperatures, and their implications to the ground-state phase diagram are also discussed.\nFinally, we discuss the BCS+U model which is a natural generalization of Gutzwiller-projected BCS model. For this study, we use the DCA combined with the weak coupling CTQMC and verify the reliability of our calculation by changing the cluster size. Our main focus is on the correlation effects of the phenomenological d-wave superconductor. The transition between the superconductor and the Mott insulator is observed as we change the interaction strength or doping concentration. We discuss the change in the spectral properties of the system during the transition.

•Jan 1, 2015•0 citations
In this work, the Hubbard model is adopted to describe fermions with on-site repulsive interaction and the nearest-neighbor hopping in anisotropic ruby lattice. The combination of cluster dynamical mean field theory and continuous-time quantum Monte Carlo algorithm is used to solve the theoretical model. It is widely accepted that the density of states and the double occupancy are two important quantities for determining the phase transition of two-dimensional strongly correlated system. Therefore, based on the self-consistent calculation, using the maximum entropy method to calculate the single particle density of states and double occupancy of fermions in anisotropic ruby lattice. Here in this work, there are 6 sites in a cluster. The influences of temperature, interaction and anisotropic parameter on metal-insulator phase transition of fermions in anisotropic ruby lattice are discussed based on the calculations of single particle density of state and double occupancy. Finally, the metal-Mott insulator phase diagram which shows the competition between temperature and on-site repulsive interaction in the phase transition of fermions in anisotropic ruby lattice is presented. The results shows that the system is in metallic state for the regime of weak interaction and low temperature, and the Mott insulator appears in the regime of strong interaction and high temperature. The metallic state and Mott insulating one are separated by the second-order transition line in the phase diagram.
Abstract Mott transition in a ruby lattice with fermions described by the Hubbard model including on-site repulsive interaction is investigated by combining the cellular dynamical mean-field theory and the continuous-time quantum Monte Carlo algorithm. The effect of temperature and on-site repulsive interaction on the metallic–insulating phase transition in ruby lattice with fermions is discussed based on the density of states and double occupancy. In addition, the magnetic property of each phase is discussed by defining certain magnetic order parameters. Our results show that the antiferromagnetic metal is found at the low temperature and weak interaction region and the antiferromagnetic insulating phase is found at the low temperature and strong interaction region. The paramagnetic metal appears in whole on-site repulsive interaction region when the temperature is higher than a certain value and the paramagnetic insulator appears at the middle scale of temperature and on-site repulsive interaction.
We investigate the effect of interaction, temperature, and anisotropic parameter on the quantum phase transitions in an anisotropic square-octagon lattice with fermions under the framework of the single band Hubbard model through using the combination of cellular dynamical mean field theory and a continuous time Monte Carlo algorithm. The competition between interaction and temperature shows that with the increase of the anisotropic parameter, the critical on-site repulsive interaction for the metal–insulator transition increases for fixed temperature. The interaction–anisotropic parameter phase diagram reveals that with the decrease of temperature, the critical anisotropic parameter for the Mott transition will increase for fixed interaction cases.
Quantum phase transition of fermionic atoms in anisotropic triangular optical lattice was investigated by dynamical cluster approximation combining with continuous time quantum Monte Carlo algorithm. The temperature-interaction phase diagram for different hoping terms and the competition between the anisotropic parameter and interaction is presented. Our results show that the system undergoes Mott transition from Fermi liquid to Mott insulator while the repulsive interaction reach the critical value. The Kondo metal characterized by Kondo peak in the density of states is found in this systems and the pseudogap are suppressed at low temperature due to the Kondo effect. We also propose a feasible experiment protocol to observe these phenomenon in the anisotropic triangular optical lattice with the cold atoms, in which the hoping terms can be varied by the lattice depth and the atomic interaction can be adjusted via Feshbach resonance.
In this article, we review our recent work on quantum phase transition in two-dimensional strongly correlated fermion systems. We discuss the metal–insulator transition properties of these systems by calculating the density of states, double occupancy, and Fermi surface evolution using a combination of the cellular dynamical mean-field theory (CDMFT) and the continuous-time quantum Monte Carlo algorithm. Furthermore, we explore the magnetic properties of each state by defining magnetic order parameters. Rich phase diagrams with many intriguing quantum states, including antiferromagnetic metal, paramagnetic metal, Kondo metal, and ferromagnetic insulator, were found for the two-dimensional lattices with strongly correlated fermions. We believe that our results would lead to a better understanding of the properties of real materials.
We study transport properties of the half-filled two-dimensional (2D) Hubbard model with spatially varying interactions, where a pattern of interacting and non-interacting sites is formed. We use Determinantal Quantum Monte Carlo method to calculate the double occupation, effective hopping and Drude weight. These data point to two phase transitions, driven by fermionic correlations. The first is the expected metal to a Mott insulating state. The second one, is an exotic transition from a Mott insulating state to a highly anisotropic metal, that takes place at large values of the fermion-fermion interaction. This second transition occurs when the layers formed by the spatially varying interactions decouple due to the suppression of the hopping between interacting and non-interacting sites, leading to fermionic transport along the non-interacting ones.
We investigate Hubbard-type models by means of the dynamical mean-field theory (DMFT) combined with the continuous-time quantum Monte Carlo (CTQMC) method. In this thesis, a great deal of effort has been devoted to investigating diverse facets of Mott physics. Interesting phenomena in strongly correlated electron systems emerge mostly when various energy scales compete with each other. We introduce additional degrees of freedom to the standard Hubbard model. The additional degrees of freedom include a staggered lattice potential, two orbitals, bilayer structure, and superconductivity. Depending on the model system, we extend the single-site DMFT to the multi-orbital one or employ cluster extension of the DMFT. In addition, two complementary versions of CTQMC, weak and strong coupling algorithm, are adopted as an impurity solver.\nWe first consider a Mott transition of the Hubbard model in infinite dimensions. The DMFT is employed in combination with the CTQMC method for an accurate description at low temperatures. Through the use of the double occupancy and the energy density, which are directly measured via the CTQMC method, we construct the phase diagram. We pay particular attention to the construction of the first-order phase transition line (PTL) in the coexistence region of metallic and insulating phases. The resulting PTL is found to exhibit reasonable agreement with earlier finite-temperature results. We also show, by including systematically low-temperature data, that the PTL, which is obtained independently of the previous zero-temperature results, approaches monotonically the transition point reported in earlier zero-temperature studies.\nWe next investigate paramagnetic metal-insulator transitions in the infinite-dimensional ionic Hubbard model at finite temperatures. By means of the DMFT with an impurity solver of the CTQMC, we show that an increase in the interaction strength brings about a crossover from a band insulating phase to a metallic one, followed by a first-order transition to the Mott insulating phase. The first-order transition turns into a crossover above a certain critical temperature, which becomes higher as the strength of the staggered lattice potential is increased. Further, analysis of the temperature dependence of the energy density discloses that the intermediate metallic phase is a Fermi liquid. It is also found that the metallic phase is stable against strong staggered potentials even at very low temperatures. \nFinite-temperature phase transitions are also examined in the two-orbital Hubbard model with Ising-type Hunds coupling. We adopt the multi-orbital extension of the DMFT combined with the strong coupling CTQMC. It is found that there emerges a peculiar reverse-sloped first-order Mott transition between the orbital-selective Mott phase and the Mott insulator phase. It turns out that the increase of Hunds coupling lowers the critical temperature of the reverse-sloped Mott transition. Beyond a certain critical value of Hunds coupling the first-order transition becomes a finite-temperature crossover.\nBilayer effects in the Hubbard model are also studied in the dynamical cluster approximation (DCA) combined with the weak coupling algorithm of CTQMC. In the magnetic phase diagrams obtained in earlier studies, there still remain several controversial issues, particularly for weak on-site Coulomb interactions. In this study, we adopt eight-site clusters which preserve the underlying lattice symmetry. Magnetic properties and associated metal-insulator transitions are examined at low temperatures, and their implications to the ground-state phase diagram are also discussed.\nFinally, we discuss the BCS+U model which is a natural generalization of Gutzwiller-projected BCS model. For this study, we use the DCA combined with the weak coupling CTQMC and verify the reliability of our calculation by changing the cluster size. Our main focus is on the correlation effects of the phenomenological d-wave superconductor. The transition between the superconductor and the Mott insulator is observed as we change the interaction strength or doping concentration. We discuss the change in the spectral properties of the system during the transition.