Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The Japan Society of Applied Physics

Design and evaluation of memory cells driven with low currents for SFQ pulse-deriven memory

H. Fujisawa, Yuto Takeshita, Kento Kato, Masayuki Higashi, Daiki Hasegawa, Feng Li, Masamitsu Tanaka, Taro Yamashita, Akira Fujimaki

Published Jan 26, 2021• 0 citations
OpenAlex

Related papers

Design and evaluation of memory cells and decoder circuits for SFQ RAM

Takeshi Igarashi, Shun Miyanishi, Hideo Suzuki +2 more

The Japan Society of Applied Physics•Feb 8, 2016•0 citations

Evaluation of various memory cells designed for SFQ mask ROM

Kazunao Sawada, Tomoki Watanabe, Hiroshi Shimada +1 more

IEICE Technical Report; IEICE Tech. Rep.•Jan 14, 2016•0 citations

Design and evaluation of superconducting nanostructured transistors for SFQ-CMOS hybrid memory

Sano Kyosuke, Kohei Maruyama, Tanaka Masamitsu +3 more

IEICE Technical Report; IEICE Tech. Rep.•Oct 3, 2018•0 citations

High-Speed Memory Driven by SFQ Pulses Based on 0-π SQUID

Yuto Takeshita, Feng Li, Daiki Hasegawa +4 more

We propose a new cryogenic high-speed and low-power matrix memory required for achieving a high-performance superconductor computing system. The memory cell is based on the 0-π SQUID with conventional Josephson junctions (0-junctions) and a π-shifted ferromagnetic Josephson junction (π-junction). The memory state is stored in the form of two stable states in the 0-π SQUID. The π shift feature of the π-junction eliminates the need for any bias current or magnetic field for the formation of two states, i.e., the memory is non-volatile. In this memory, an impulse-shaped voltage signal generated in single-flux-quantum (SFQ) circuits is used for the write and read operations of the memory state. By using the pulses propagating in passive transmission lines, high-speed and low-power operation can be achieved because a recharging process determining the operation speed and the dominant energy consumption can be eliminated. We fabricated the 0-π SQUID-based pulse-driven memory cells with an SFQ driver. From the static characteristics, we confirmed that the current needed for rewriting can be sufficiently reduced. In addition, we successfully demonstrated the correct write operation in the memory cell by the SFQ pulse train transmitted from the SFQ driver via the passive transmission line.

IEEE Transactions on Applied Superconductivity•Feb 20, 2021•28 citations

Multi Fluxon Storage and its Implications for Microprocessor Design

Naveen Kumar Katam, Haipeng Zha, Massoud Pedram +1 more

Abstract One of the main challenges for single flux quantum (SFQ) technology to successfully implement a microprocessor is to have a compact and robust on-chip memory that can be used for register files and cache memory. In this context, we designed high capacity destructive readout (HC-DRO) cells. The design is based on our insight that each cell can store more than one SFQ pulse with the same area footprint of a regular DRO cell. In our current design, we demonstrate a single HC-DRO cell that can store up to three SFQ pulses thereby enabling us to store the equivalent of two bits of memory in a single cell. We have designed a register file (RF) architecture for a microprocessor and used the HC-DRO cells to reduce the Josephson junction count required for its implementation. The RF architecture presented in this work can also be used for implementing cache memories. We also demonstrate the benefits of doubling the storage density with HC-DRO cells by designing a 2-bit branch predictor circuit block for a 5-stage pipeline microprocessor that dramatically improves the cycles per instruction metric of an SFQ based microprocessor. All the design details are presented in the paper by verifying the design concepts through JSIM simulations and Verilog simulations.

Journal of Physics Conference Series•Jun 1, 2020•12 citations

Functional Demonstration of an SFQ/CMOS Hybrid Memory System

勝利 徳田, 卓哉 冨田, 完 藤原 +2 more

IEICE Technical Report; IEICE Tech. Rep.•Jul 8, 2004•0 citations
We propose a new cryogenic high-speed and low-power matrix memory required for achieving a high-performance superconductor computing system. The memory cell is based on the 0-π SQUID with conventional Josephson junctions (0-junctions) and a π-shifted ferromagnetic Josephson junction (π-junction). The memory state is stored in the form of two stable states in the 0-π SQUID. The π shift feature of the π-junction eliminates the need for any bias current or magnetic field for the formation of two states, i.e., the memory is non-volatile. In this memory, an impulse-shaped voltage signal generated in single-flux-quantum (SFQ) circuits is used for the write and read operations of the memory state. By using the pulses propagating in passive transmission lines, high-speed and low-power operation can be achieved because a recharging process determining the operation speed and the dominant energy consumption can be eliminated. We fabricated the 0-π SQUID-based pulse-driven memory cells with an SFQ driver. From the static characteristics, we confirmed that the current needed for rewriting can be sufficiently reduced. In addition, we successfully demonstrated the correct write operation in the memory cell by the SFQ pulse train transmitted from the SFQ driver via the passive transmission line.
Abstract One of the main challenges for single flux quantum (SFQ) technology to successfully implement a microprocessor is to have a compact and robust on-chip memory that can be used for register files and cache memory. In this context, we designed high capacity destructive readout (HC-DRO) cells. The design is based on our insight that each cell can store more than one SFQ pulse with the same area footprint of a regular DRO cell. In our current design, we demonstrate a single HC-DRO cell that can store up to three SFQ pulses thereby enabling us to store the equivalent of two bits of memory in a single cell. We have designed a register file (RF) architecture for a microprocessor and used the HC-DRO cells to reduce the Josephson junction count required for its implementation. The RF architecture presented in this work can also be used for implementing cache memories. We also demonstrate the benefits of doubling the storage density with HC-DRO cells by designing a 2-bit branch predictor circuit block for a 5-stage pipeline microprocessor that dramatically improves the cycles per instruction metric of an SFQ based microprocessor. All the design details are presented in the paper by verifying the design concepts through JSIM simulations and Verilog simulations.