Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Vehicular Technology Conference

Investigating the eavesdropper attack in physical layer security wireless key generation: a simulation case study

Marco Zoli, Andre Noll Barreto, Gerhard Paul Fettweis

Published Apr 1, 2021• 9 citations
Publisher

Abstract

In this work we explore the problem of physical layer security key exchange between two communicating devices in wideband wireless networks. We propose to obtain a pair of symmetric keys through a general filtering procedure, which exploits the frequency-selective characteristics of the radio channel. We focus our analysis on the keys bits mismatch with respect to the signal-to-noise-ratio and the link distance, through simulations of realistic radio channels in both indoor and outdoor scenarios. We investigated the impact of a proximity-attack by a malicious third device, founding that it is capable to eavesdrop large parts of the generated key compromising the overall security.

DOI
10.1109/vtc2021-spring51267.2021.9448992

Related papers

Effect of Radio Channel and Antennas on Physical-Layer-Security Key Exchange

Alessandro Santorsola, Marco Zoli, Andre Noll Barreto +2 more

The wireless channel is inherently an open medium which exposes wireless communication users to the risk of interception. The vulnerabilities of the wireless channel have led to the search for innovative and efficient security solutions at different levels of the network protocol. In particular, the physical layer level allows for implementing some security functions, such as key generation and exchange, by exploiting the intrinsic randomness of the wireless communication channel. In this paper, we analyze the effect of wireless channel and of antenna characteristics on physical layer security (PLS) key generation. The aim is to put in evidence the relation between physical quantities, such as radio channel characteristics or antenna directivity, with higher level secrecy performance indicators, such as the key mismatch between the different communication nodes and the key randomness. For this purpose, we developed a comprehensive numerical model, which implements all the different steps, from signal generation and wireless propagation modeling to key generation through spectral quantization. The reported results show that the multipath richness of the radio channel, as in outdoor urban scenarios, improves the PLS secrecy performances with respect to simpler propagation scenarios. Moreover, we show that the use of more directive antennas in the legitimate communication link improves secrecy. An opposite effect is achieved when the directivity of the eavesdropper antenna is increased, thus improving its ability to perform passive attacks.

IEEE Access•Jan 1, 2021•8 citations

Effect of Indoor Radio Propagation on Physical Layer Security Secrecy Key Generation

Alessandro Santorsola, Giovanni Magno, Vincenzo Petruzzelli +2 more

Physical Layer Security (PLS) is emerging as an innovative solution to enhance the security of wireless communications. This work analyzes the impact of a realistic indoor radio propagation on Secrecy Key Generation (SKG) in a Wi-Fi application scenario. This PLS technique is based on the extraction of raw cryptographic keys, taking advantage of the radio propagation phenomena as a source of entropy. In detail, we considered two legitimate nodes, i.e., Alice and Bob, which use the SKG to extract keys from the channel, and a malicious node, i.e., Eve, which acts as a passive eavesdropper and tries to discover the key. The reported results show that legitimate nodes key mismatch is strongly influenced by noise contribution, and the eavesdropper attack performs better with a higher Line-of-Sight (LoS) contribution. Conversely, when the power is evenly spread over all the multipath components, the eavesdropped key mismatch is maintained in the range of 30 – 50 %.

USNC-URSI Radio Science Meeting•Jul 14, 2024•1 citation

Comparative Study of Physical Layer Secure Key Generation for Wireless Networks

Himanshi, Ankit Garg

Wireless network security is crucial for modern communication systems, requiring robust security mechanisms to safeguard transmitted data. Physical layer security, leveraging channel characteristics for key generation, has emerged as a promising approach. In this paper, we study the process of generating and sharing keys among authorized users without compromising secrecy. However, existing methods face challenges, particularly with a high rate of errors in the generated keys and the risk of using the same key multiple times, which could compromise security. We have explored generating a unique key for each session. Our study examines the bit generation rate and verify the consistency of the secure key. We found the trade-off between the number of symbols and the quantization levels for quadrature amplitude modulation as well as binary phase shift keying. Further, the discussion delves into the impact of channel non-reciprocity on the process of secure key generation. Moreover, we achieved almost zero bit error rate at high signal-to-noise ratio.

IEEE Region 10 Symposium (TENSYMP)•Sep 27, 2024•0 citations

Robust Physical-Layer Key Generation Using UWB in Industrial IoT: A Measurement-Based Analysis

Lorenzo Mario Amorosa, Stefano Caputo, Lorenzo Mucchi +1 more

This paper addresses the confidentiality of wireless communications in industrial internet-of-things environments by investigating the feasibility of secret key generation for link-layer encryption using ultra wideband (UWB) signals. Taking advantage of the nanosecond-level temporal resolution offered by ultra wideband, we exploit channel reciprocity to extract highly detailed, noise-like channel measurements, in line with the physical-layer security paradigm. Three key generation algorithms, operating in both the time and frequency domains, are evaluated using real-world data collected through a dedicated measurement campaign in an industrial setting. The analysis, conducted under realistic conditions, examines the impact of practical impairments, such as imperfect channel reciprocity and timing misalignments, on the key agreement rate and the length of the generated keys. The results confirm the strong potential of ultra wideband technology to enable robust physical-layer security, offering a viable and efficient solution for securing wireless communications in complex and dynamic industrial internet-of-things environments.

Journal of Sensor and Actuator Networks•Dec 23, 2025•0 citations

Estimation of the Secret Key Rate in Wideband Wireless Physical-Layer-Security

Marco Zoli, Miroslav Mitev, Andre Noll Barreto +1 more

In this work we investigate the problem of secret key generation (SKG) between two communicating wireless devices, according to the physical-layer security paradigm. We propose a general framework for any communication channel or waveform. In details, we study a filterbank-based method, which allows the generation of secret security keys from a wideband radio channel, independently from the baseband modem implementation. We believe that channel awareness is of utmost importance to understand the applicability of SKG methods, i.e., knowing their secret bit-rate under different channel scenarios. For that purpose, we investigate the SKG performance by means of Monte Carlo simulations that collect radio channel statistics and obtain the SKG performance through mutual information numerical estimation.

International Symposium on Wireless Communication Systems•Sep 6, 2021•15 citations

Comparative Analysis of Quantization Schemes for Physical Layer Key generation

Sujata V. Kadam, Joanne Gomes

Wireless networks get subjected to the different attacks because of it's open nature. Eavesdropping attack, which occurs at the Physical layer of the OSI model, has a great impact on wireless network security. Conventional security in wireless networks depends on the cryptographic techniques. But in wireless sensor networks where a key management infrastructure may not be present and the power resources are also limited, generating a cryptographic key between two mobile entities becomes difficult. Hence Physical layer Security (PLS) has become a novel research solution. In PLS based key generation, a symmetric secret key is obtained at both the ends of the legitimate users using the properties of wireless channel. The key generation process includes four major blocks namely channel measurement, quantization of input samples, error detection and correction and privacy amplification. The output of quantizer has a great effect on the bit mismatch rate (BMR) between the two legitimate users. It also has an impact on key generation rate (KGR). Hence selecting a proper quantizer becomes very essential. In this paper different Quantization schemes are analyzed to achieve effective PLS between the two legitimate users.

International Conference on Advances in Science and Technology (ICAST)•Dec 2, 2022•4 citations
In this work we explore the problem of physical layer security key exchange between two communicating devices in wideband wireless networks. We propose to obtain a pair of symmetric keys through a general filtering procedure, which exploits the frequency-selective characteristics of the radio channel. We focus our analysis on the keys bits mismatch with respect to the signal-to-noise-ratio and the link distance, through simulations of realistic radio channels in both indoor and outdoor scenarios. We investigated the impact of a proximity-attack by a malicious third device, founding that it is capable to eavesdrop large parts of the generated key compromising the overall security.
The wireless channel is inherently an open medium which exposes wireless communication users to the risk of interception. The vulnerabilities of the wireless channel have led to the search for innovative and efficient security solutions at different levels of the network protocol. In particular, the physical layer level allows for implementing some security functions, such as key generation and exchange, by exploiting the intrinsic randomness of the wireless communication channel. In this paper, we analyze the effect of wireless channel and of antenna characteristics on physical layer security (PLS) key generation. The aim is to put in evidence the relation between physical quantities, such as radio channel characteristics or antenna directivity, with higher level secrecy performance indicators, such as the key mismatch between the different communication nodes and the key randomness. For this purpose, we developed a comprehensive numerical model, which implements all the different steps, from signal generation and wireless propagation modeling to key generation through spectral quantization. The reported results show that the multipath richness of the radio channel, as in outdoor urban scenarios, improves the PLS secrecy performances with respect to simpler propagation scenarios. Moreover, we show that the use of more directive antennas in the legitimate communication link improves secrecy. An opposite effect is achieved when the directivity of the eavesdropper antenna is increased, thus improving its ability to perform passive attacks.
Physical Layer Security (PLS) is emerging as an innovative solution to enhance the security of wireless communications. This work analyzes the impact of a realistic indoor radio propagation on Secrecy Key Generation (SKG) in a Wi-Fi application scenario. This PLS technique is based on the extraction of raw cryptographic keys, taking advantage of the radio propagation phenomena as a source of entropy. In detail, we considered two legitimate nodes, i.e., Alice and Bob, which use the SKG to extract keys from the channel, and a malicious node, i.e., Eve, which acts as a passive eavesdropper and tries to discover the key. The reported results show that legitimate nodes key mismatch is strongly influenced by noise contribution, and the eavesdropper attack performs better with a higher Line-of-Sight (LoS) contribution. Conversely, when the power is evenly spread over all the multipath components, the eavesdropped key mismatch is maintained in the range of 30 – 50 %.
Wireless network security is crucial for modern communication systems, requiring robust security mechanisms to safeguard transmitted data. Physical layer security, leveraging channel characteristics for key generation, has emerged as a promising approach. In this paper, we study the process of generating and sharing keys among authorized users without compromising secrecy. However, existing methods face challenges, particularly with a high rate of errors in the generated keys and the risk of using the same key multiple times, which could compromise security. We have explored generating a unique key for each session. Our study examines the bit generation rate and verify the consistency of the secure key. We found the trade-off between the number of symbols and the quantization levels for quadrature amplitude modulation as well as binary phase shift keying. Further, the discussion delves into the impact of channel non-reciprocity on the process of secure key generation. Moreover, we achieved almost zero bit error rate at high signal-to-noise ratio.
This paper addresses the confidentiality of wireless communications in industrial internet-of-things environments by investigating the feasibility of secret key generation for link-layer encryption using ultra wideband (UWB) signals. Taking advantage of the nanosecond-level temporal resolution offered by ultra wideband, we exploit channel reciprocity to extract highly detailed, noise-like channel measurements, in line with the physical-layer security paradigm. Three key generation algorithms, operating in both the time and frequency domains, are evaluated using real-world data collected through a dedicated measurement campaign in an industrial setting. The analysis, conducted under realistic conditions, examines the impact of practical impairments, such as imperfect channel reciprocity and timing misalignments, on the key agreement rate and the length of the generated keys. The results confirm the strong potential of ultra wideband technology to enable robust physical-layer security, offering a viable and efficient solution for securing wireless communications in complex and dynamic industrial internet-of-things environments.
In this work we investigate the problem of secret key generation (SKG) between two communicating wireless devices, according to the physical-layer security paradigm. We propose a general framework for any communication channel or waveform. In details, we study a filterbank-based method, which allows the generation of secret security keys from a wideband radio channel, independently from the baseband modem implementation. We believe that channel awareness is of utmost importance to understand the applicability of SKG methods, i.e., knowing their secret bit-rate under different channel scenarios. For that purpose, we investigate the SKG performance by means of Monte Carlo simulations that collect radio channel statistics and obtain the SKG performance through mutual information numerical estimation.
Wireless networks get subjected to the different attacks because of it's open nature. Eavesdropping attack, which occurs at the Physical layer of the OSI model, has a great impact on wireless network security. Conventional security in wireless networks depends on the cryptographic techniques. But in wireless sensor networks where a key management infrastructure may not be present and the power resources are also limited, generating a cryptographic key between two mobile entities becomes difficult. Hence Physical layer Security (PLS) has become a novel research solution. In PLS based key generation, a symmetric secret key is obtained at both the ends of the legitimate users using the properties of wireless channel. The key generation process includes four major blocks namely channel measurement, quantization of input samples, error detection and correction and privacy amplification. The output of quantizer has a great effect on the bit mismatch rate (BMR) between the two legitimate users. It also has an impact on key generation rate (KGR). Hence selecting a proper quantizer becomes very essential. In this paper different Quantization schemes are analyzed to achieve effective PLS between the two legitimate users.