Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Thermodynamic properties of transverse field quantum Ising model using tensor network formalism / Pang Sin Yang

S. Y. Pang

Published Mar 1, 2020• 0 citations
OpenAlex

Abstract

Ising model has been successful in describing ferromagnetism and its phase transition to paramagnet. At the critical point, the free energy density function and its derivatives diverge. Their behaviour near the critical point are described by power-laws with associated critical exponents. In many cases, the critical exponents can be determined from analytic solutions via conventional renormalization groups methods or from Monte Carlo simulations. However, for quantum many-body systems, very few are tractable to analytical solutions. The quantum many-body wavefunction belongs to large dimensional Hilbert space that increases exponentially with system size. If the Hamiltonian is gapped and only local interaction is considered, then the wavefunction can be efficiently truncated. Tensor Network formalism provides a scheme to truncate the less important degrees of freedom via Singular Value Decomposition (SVD) of the density matrix. In this study, we investigated the thermodynamic properties and phase transition of one-dimensional transverse-field quantum Ising model (1D-tQIM) under the finite-size effect and random coupling strength. Starting with Matrix Product States (MPS) as a wavefunction ansatz, the Density Matrix Renormalization Group algorithm is applied to the MPS. The variational algorithm, which iteratively performs SVDs and truncation at each bond, approximates the ground state MPS wavefunction. All quantum observables are calculated from the contraction of the resultant ground state MPS. Although theoretically, divergence at critical points only happen in an infinite system, one can obtain the critical exponents through simulation of finite-size 1D-tQIM. Using the analytic solution as a benchmark, we compared the finite-size effects of the system using finite-size scaling analysis and MPS methods. The critical exponents of 1D-tQIM are independently calculated and compared with the analytical results. Thermodynamic quantities such as magnetization, susceptibility and correlation function are calculated for system sizes of 20, 40, 60, 80, 100 and 120 spins. We determined the respective critical exponents:

Related papers

Fidelity approach to quantum phase transitions: finite-size scaling for the quantum Ising model in a transverse field

Huan-Qiang Zhou, Jian-Hui Zhao, Bo Li

We analyze the fidelity per lattice site for two different ground states of the one-dimensional quantum Ising model in a transverse field near the critical point. It is found that, in the thermodynamic limit, the fidelity per lattice site is singular, and the derivative of its logarithmic function with respect to the transverse field strength is logarithmically divergent at the critical point. The scaling behavior is confirmed numerically by performing a finite-size scaling analysis for systems of different sizes, consistent with the conformal invariance at the critical point. This allows us to extract the correlation length critical exponent, which turns out to be universal in the sense that the correlation length critical exponent does not depend on either the anisotropic parameter or the transverse field strength.

arXiv:0704.2940•Journal of Physics A Mathematical and Theoretical•Oct 29, 2008•137 citations

Critical behavior of the two-dimensional Ising model in a transverse field: A density-matrix renormalization calculation

M. S. L. du Croo de Jongh, J. M. J. van Leeuwen

We have adjusted the density-matrix renormalization method to handle two-dimensional systems of limited width. The key ingredient for this extension is the incorporation of symmetries in the method. The advantage of our approach is that we can force certain symmetry properties to the resulting ground-state wave function. Combining the results obtained for system sizes up to $30\ifmmode\times\else\texttimes\fi{}6$ and finite-size scaling, we derive the phase-transition point and the critical exponent for the gap in the Ising model in a transverse field on a two-dimensional square lattice.

arXiv:cond-mat/9709103•Physical review. B, Condensed matter•Apr 1, 1998•71 citations

Finite-size scaling analysis of the two-dimensional random transverse-field Ising ferromagnet

Jiwon Choi, Seung Ki Baek

The random transverse-field Ising ferromagnet (RTFIF) is a highly disordered quantum system which contains randomness in the coupling strengths as well as in the transverse-field strengths. In one dimension, the critical properties are governed by an infinite-randomness fixed point (IRFP), and renormalization-group studies argue that the two-dimensional (2D) model is also governed by an IRFP. However, even the location of the critical point remains unsettled among quantum Monte Carlo (QMC) studies. In this work, we perform extensive QMC simulations to locate the quantum critical point and attempt a finite-size scaling analysis to observe the critical behavior. We estimate the critical field strength of the 2D RTFIF as ${\mathrm{\ensuremath{\Gamma}}}_{c}=7.52(2)$, together with critical exponents such as $\ensuremath{\beta}=1.5(3), \ensuremath{\nu}=1.6(3)$, and $z=3.3(3)$ or $\ensuremath{\psi}=0.50(3)$. We have also considered the McCoy-Wu model, which has randomness in the ferromagnetic coupling strengths but not in the transverse-field strength. Our QMC calculation shows that the critical behavior of the 2D McCoy-Wu model is closer to that of the 2D transverse-field Ising spin glass than to that of the 2D RTFIF. These numerical findings enhance our understanding of disordered 2D quantum systems.

arXiv:2310.14756•Physical review. B./Physical review. B•Oct 20, 2023•5 citations

Quantum-critical properties of the one- and two-dimensional random transverse-field Ising model from large-scale quantum Monte Carlo simulations

Calvin Krämer, Jan Alexander Koziol, Anja Langheld +2 more

We study the ferromagnetic transverse-field Ising model with quenched disorder at T = 0 T = 0 in one and two dimensions by means of stochastic series expansion quantum Monte Carlo simulations using a rigorous zero-temperature scheme. Using a sample-replication method and averaged Binder ratios, we determine the critical shift and width exponents \nu_\mathrm{s} ν s and \nu_\mathrm{w} ν w as well as unbiased critical points by finite-size scaling. Further, scaling of the disorder-averaged magnetisation at the critical point is used to determine the order-parameter critical exponent \beta β and the critical exponent \nu_{\mathrm{av}} ν a v of the average correlation length. The dynamic scaling in the Griffiths phase is investigated by measuring the local susceptibility in the disordered phase and the dynamic exponent z' z ′ is extracted. By applying various finite-size scaling protocols, we provide an extensive and comprehensive comparison between the different approaches on equal footing. The emphasis on effective zero-temperature simulations resolves several inconsistencies in existing literature.

arXiv:2403.05223•SciPost Physics•Aug 23, 2024•8 citations

Thermal tensor renormalization group simulations of square-lattice quantum spin models

Han Li, Bin-Bin Chen, Ziyu Chen +3 more

In this work, we benchmark the well-controlled and numerically accurate exponential thermal tensor renormalization group (XTRG) in the simulation of interacting spin models in two dimensions. Finite temperature introduces a finite thermal correlation length $\ensuremath{\xi}$, such that for system sizes $L\ensuremath{\gg}\ensuremath{\xi}$ finite-size calculations actually simulate the thermodynamic limit. In this paper, we focus on the square lattice Heisenberg antiferromagnet (SLH) and quantum Ising models (QIM) on open and cylindrical geometries up to width $W=10$. We explore various one-dimensional mapping paths in the matrix product operator (MPO) representation, whose performance is clearly shown to be geometry dependent. We benchmark against quantum Monte Carlo (QMC) data, yet also the series-expansion thermal tensor network results. Thermal properties including the internal energy, specific heat, and spin structure factors, etc. are computed with high precision, obtaining excellent agreement with QMC results. XTRG also allows us to reach remarkably low temperatures. For SLH, we obtain an energy per site ${u}_{g}^{*}\ensuremath{\simeq}\ensuremath{-}0.6694(4)$ and a spontaneous magnetization ${m}_{S}^{*}\ensuremath{\simeq}0.30(1)$ already consistent with the ground-state properties, which is obtained from extrapolated low-$T$ thermal data on $W\ensuremath{\le}8$ cylinders and $W\ensuremath{\le}10$ open strips, respectively. We extract an exponential divergence versus $T$ of the structure factor $S(M)$, as well as the correlation length $\ensuremath{\xi}$, at the ordering wave vector $M=(\ensuremath{\pi},\ensuremath{\pi})$, which represents the renormalized classical behavior and can be observed over a narrow but appreciable temperature window, by analyzing the finite-size data by XTRG simulations. For the QIM with a finite-temperature phase transition, we employ several thermal quantities, including the specific heat, Binder ratio, as well as the MPO entanglement to determine the critical temperature ${T}_{c}$.

arXiv:1904.06273•Physical review. B./Physical review. B•Jul 9, 2019•43 citations

Matrix product state study of strongly-interacting systems and quantum phase transitions

Jason C. Pillay

The study of low-dimensional, strongly-interacting quantum systems has been of interest in the past few decades due to new and exotic physics that show great potential in the advancement of fundamental physics as well as technological applications. In order to investigate such systems, a vast number of techniques have been developed throughout the years, all of which have their respective strengths and weaknesses. In the world of one-dimensional (1D) quantum systems, the density-matrix renormalization group (DMRG) algorithm and matrix product states (MPS) have proven to be powerful and reliable tools that provide invaluable information while providing a wide range of data that support both theoretical and experimental studies. Coupled with the development and refinement of tensor networks - an ansatz for quantum many-body wavefunctions, in particular MPS, the DMRG algorithm has seen a spike of improvements that has pushed the boundaries of its application into more sophisticated and complex systems.This thesis broadly covers the study of several 1D many-body quantum systems represented by infinite MPS (iMPS) - a class of ansatz that represent translationally-invariant, 1D many-body quantum states. More specifically, it is divided into two main parts.The first part investigates the 1D topological Kondo insulator (TKI). This is an effective model designed to investigate how strong interactions between conduction electrons and localized moments result in a symmetry-protected topological (SPT) phase, specifically the Haldane phase. By studying the effect of the electron repulsion as well as the competition between the local and non-local couplings between the electrons and the local moments, it is found that a topological phase transition from the SPT phase to a topologically trivial phase occurs with the assistance of electron interaction. The properties of both topologically trivial and nontrivial groundstates were revealed via means of quantum information theoretic quantities such as the entanglement entropy, entanglement spectrum and non-local order parameters. These quantities unveil the nature, structure and the effect that the different interactions have on the groundstate properties. Besides the phases, the properties of the critical point was studied and classified. By obtaining the critical exponents and central charge, the universality class of this transition was found to be that of 1D free fermions/bosons. Furthermore, the presence of electron interactions was found not to alter this universality class.The second part of this thesis is a project that stems from the necessity to overcome the inherent limitation of an iMPS in representing a system at a cusp of a quantum phase transition (QPT), specifically, in determining the critical point and exponents. In the thermodynamic limit, the laws of statistical mechanics dictates that the system’s correlation length diverges at the critical point. However, when representing a critical state with an iMPS, the finite bond dimension implies that the correlation length of the iMPS remains finite, albeit large. This presents a fundamental challenge in extracting critical data since the critical exponents are defined for systems in the thermodynamic limit. To overcome this shortcoming, finite-entanglement scaling (FES) - the analog of finite-size scaling, has previously been used to locate the critical point and extract the critical exponents for systems represented by finite-bond dimensional iMPS. While FES serves its purpose sufficiently well, the computational cost is high for just about any moderately complex, real-world system. To overcome such difficulties, the second part of this thesis combines new ideas of using higher-order cumulants of the order parameter with previously-known iMPS techniques to determine the critical point and extract the exponents, thus relating statistical mechanics of QPTs and tensor networks of critical states. Some of the main methods used and developed here are FES, the application of the Binder cumulant in iMPS and the new cumulant exponent relation. Putting these tools together provides a scheme that can be used to efficiently locate the critical point and extract the critical exponents at a lower computational cost than previously-known methods. This is shown through comparisons of several exemplary models such as the 1D and quasi-1D transverse field Ising model, the 1D TKI, the S = 1 Heisenberg chain with single-ion anisotropy and the 1D Bose-Hubbard model.

•Mar 16, 2020•1 citation
Ising model has been successful in describing ferromagnetism and its phase transition to paramagnet. At the critical point, the free energy density function and its derivatives diverge. Their behaviour near the critical point are described by power-laws with associated critical exponents. In many cases, the critical exponents can be determined from analytic solutions via conventional renormalization groups methods or from Monte Carlo simulations. However, for quantum many-body systems, very few are tractable to analytical solutions. The quantum many-body wavefunction belongs to large dimensional Hilbert space that increases exponentially with system size. If the Hamiltonian is gapped and only local interaction is considered, then the wavefunction can be efficiently truncated. Tensor Network formalism provides a scheme to truncate the less important degrees of freedom via Singular Value Decomposition (SVD) of the density matrix. In this study, we investigated the thermodynamic properties and phase transition of one-dimensional transverse-field quantum Ising model (1D-tQIM) under the finite-size effect and random coupling strength. Starting with Matrix Product States (MPS) as a wavefunction ansatz, the Density Matrix Renormalization Group algorithm is applied to the MPS. The variational algorithm, which iteratively performs SVDs and truncation at each bond, approximates the ground state MPS wavefunction. All quantum observables are calculated from the contraction of the resultant ground state MPS. Although theoretically, divergence at critical points only happen in an infinite system, one can obtain the critical exponents through simulation of finite-size 1D-tQIM. Using the analytic solution as a benchmark, we compared the finite-size effects of the system using finite-size scaling analysis and MPS methods. The critical exponents of 1D-tQIM are independently calculated and compared with the analytical results. Thermodynamic quantities such as magnetization, susceptibility and correlation function are calculated for system sizes of 20, 40, 60, 80, 100 and 120 spins. We determined the respective critical exponents:
We analyze the fidelity per lattice site for two different ground states of the one-dimensional quantum Ising model in a transverse field near the critical point. It is found that, in the thermodynamic limit, the fidelity per lattice site is singular, and the derivative of its logarithmic function with respect to the transverse field strength is logarithmically divergent at the critical point. The scaling behavior is confirmed numerically by performing a finite-size scaling analysis for systems of different sizes, consistent with the conformal invariance at the critical point. This allows us to extract the correlation length critical exponent, which turns out to be universal in the sense that the correlation length critical exponent does not depend on either the anisotropic parameter or the transverse field strength.
We have adjusted the density-matrix renormalization method to handle two-dimensional systems of limited width. The key ingredient for this extension is the incorporation of symmetries in the method. The advantage of our approach is that we can force certain symmetry properties to the resulting ground-state wave function. Combining the results obtained for system sizes up to $30\ifmmode\times\else\texttimes\fi{}6$ and finite-size scaling, we derive the phase-transition point and the critical exponent for the gap in the Ising model in a transverse field on a two-dimensional square lattice.
The random transverse-field Ising ferromagnet (RTFIF) is a highly disordered quantum system which contains randomness in the coupling strengths as well as in the transverse-field strengths. In one dimension, the critical properties are governed by an infinite-randomness fixed point (IRFP), and renormalization-group studies argue that the two-dimensional (2D) model is also governed by an IRFP. However, even the location of the critical point remains unsettled among quantum Monte Carlo (QMC) studies. In this work, we perform extensive QMC simulations to locate the quantum critical point and attempt a finite-size scaling analysis to observe the critical behavior. We estimate the critical field strength of the 2D RTFIF as ${\mathrm{\ensuremath{\Gamma}}}_{c}=7.52(2)$, together with critical exponents such as $\ensuremath{\beta}=1.5(3), \ensuremath{\nu}=1.6(3)$, and z=3.3(3)z=3.3(3)z=3.3(3) or $\ensuremath{\psi}=0.50(3)$. We have also considered the McCoy-Wu model, which has randomness in the ferromagnetic coupling strengths but not in the transverse-field strength. Our QMC calculation shows that the critical behavior of the 2D McCoy-Wu model is closer to that of the 2D transverse-field Ising spin glass than to that of the 2D RTFIF. These numerical findings enhance our understanding of disordered 2D quantum systems.
We study the ferromagnetic transverse-field Ising model with quenched disorder at T = 0 T = 0 in one and two dimensions by means of stochastic series expansion quantum Monte Carlo simulations using a rigorous zero-temperature scheme. Using a sample-replication method and averaged Binder ratios, we determine the critical shift and width exponents \nu_\mathrm{s} ν s and \nu_\mathrm{w} ν w as well as unbiased critical points by finite-size scaling. Further, scaling of the disorder-averaged magnetisation at the critical point is used to determine the order-parameter critical exponent \beta β and the critical exponent \nu_{\mathrm{av}} ν a v of the average correlation length. The dynamic scaling in the Griffiths phase is investigated by measuring the local susceptibility in the disordered phase and the dynamic exponent z' z ′ is extracted. By applying various finite-size scaling protocols, we provide an extensive and comprehensive comparison between the different approaches on equal footing. The emphasis on effective zero-temperature simulations resolves several inconsistencies in existing literature.
In this work, we benchmark the well-controlled and numerically accurate exponential thermal tensor renormalization group (XTRG) in the simulation of interacting spin models in two dimensions. Finite temperature introduces a finite thermal correlation length $\ensuremath{\xi}$, such that for system sizes $L\ensuremath{\gg}\ensuremath{\xi}$ finite-size calculations actually simulate the thermodynamic limit. In this paper, we focus on the square lattice Heisenberg antiferromagnet (SLH) and quantum Ising models (QIM) on open and cylindrical geometries up to width W=10W=10W=10. We explore various one-dimensional mapping paths in the matrix product operator (MPO) representation, whose performance is clearly shown to be geometry dependent. We benchmark against quantum Monte Carlo (QMC) data, yet also the series-expansion thermal tensor network results. Thermal properties including the internal energy, specific heat, and spin structure factors, etc. are computed with high precision, obtaining excellent agreement with QMC results. XTRG also allows us to reach remarkably low temperatures. For SLH, we obtain an energy per site ${u}_{g}^{*}\ensuremath{\simeq}\ensuremath{-}0.6694(4)$ and a spontaneous magnetization ${m}_{S}^{*}\ensuremath{\simeq}0.30(1)$ already consistent with the ground-state properties, which is obtained from extrapolated low-TTT thermal data on $W\ensuremath{\le}8$ cylinders and $W\ensuremath{\le}10$ open strips, respectively. We extract an exponential divergence versus TTT of the structure factor S(M)S(M)S(M), as well as the correlation length $\ensuremath{\xi}$, at the ordering wave vector $M=(\ensuremath{\pi},\ensuremath{\pi})$, which represents the renormalized classical behavior and can be observed over a narrow but appreciable temperature window, by analyzing the finite-size data by XTRG simulations. For the QIM with a finite-temperature phase transition, we employ several thermal quantities, including the specific heat, Binder ratio, as well as the MPO entanglement to determine the critical temperature Tc{T}_{c}Tc​.
The study of low-dimensional, strongly-interacting quantum systems has been of interest in the past few decades due to new and exotic physics that show great potential in the advancement of fundamental physics as well as technological applications. In order to investigate such systems, a vast number of techniques have been developed throughout the years, all of which have their respective strengths and weaknesses. In the world of one-dimensional (1D) quantum systems, the density-matrix renormalization group (DMRG) algorithm and matrix product states (MPS) have proven to be powerful and reliable tools that provide invaluable information while providing a wide range of data that support both theoretical and experimental studies. Coupled with the development and refinement of tensor networks - an ansatz for quantum many-body wavefunctions, in particular MPS, the DMRG algorithm has seen a spike of improvements that has pushed the boundaries of its application into more sophisticated and complex systems.This thesis broadly covers the study of several 1D many-body quantum systems represented by infinite MPS (iMPS) - a class of ansatz that represent translationally-invariant, 1D many-body quantum states. More specifically, it is divided into two main parts.The first part investigates the 1D topological Kondo insulator (TKI). This is an effective model designed to investigate how strong interactions between conduction electrons and localized moments result in a symmetry-protected topological (SPT) phase, specifically the Haldane phase. By studying the effect of the electron repulsion as well as the competition between the local and non-local couplings between the electrons and the local moments, it is found that a topological phase transition from the SPT phase to a topologically trivial phase occurs with the assistance of electron interaction. The properties of both topologically trivial and nontrivial groundstates were revealed via means of quantum information theoretic quantities such as the entanglement entropy, entanglement spectrum and non-local order parameters. These quantities unveil the nature, structure and the effect that the different interactions have on the groundstate properties. Besides the phases, the properties of the critical point was studied and classified. By obtaining the critical exponents and central charge, the universality class of this transition was found to be that of 1D free fermions/bosons. Furthermore, the presence of electron interactions was found not to alter this universality class.The second part of this thesis is a project that stems from the necessity to overcome the inherent limitation of an iMPS in representing a system at a cusp of a quantum phase transition (QPT), specifically, in determining the critical point and exponents. In the thermodynamic limit, the laws of statistical mechanics dictates that the system’s correlation length diverges at the critical point. However, when representing a critical state with an iMPS, the finite bond dimension implies that the correlation length of the iMPS remains finite, albeit large. This presents a fundamental challenge in extracting critical data since the critical exponents are defined for systems in the thermodynamic limit. To overcome this shortcoming, finite-entanglement scaling (FES) - the analog of finite-size scaling, has previously been used to locate the critical point and extract the critical exponents for systems represented by finite-bond dimensional iMPS. While FES serves its purpose sufficiently well, the computational cost is high for just about any moderately complex, real-world system. To overcome such difficulties, the second part of this thesis combines new ideas of using higher-order cumulants of the order parameter with previously-known iMPS techniques to determine the critical point and extract the exponents, thus relating statistical mechanics of QPTs and tensor networks of critical states. Some of the main methods used and developed here are FES, the application of the Binder cumulant in iMPS and the new cumulant exponent relation. Putting these tools together provides a scheme that can be used to efficiently locate the critical point and extract the critical exponents at a lower computational cost than previously-known methods. This is shown through comparisons of several exemplary models such as the 1D and quasi-1D transverse field Ising model, the 1D TKI, the S = 1 Heisenberg chain with single-ion anisotropy and the 1D Bose-Hubbard model.