Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Computer Conference, Computer Society of Iran (CSICC)

A Novel Design of Quantum 3:8 Decoder Circuit using Reversible Logic for Improvement in Key Quantum Circuit Design Parameters

Seyyed Mohammad Amir Mirizadeh, Mohammad Mahdi Emadi Kouchak, Mohammad Mehdi Panahi

Published Mar 3, 2021• 4 citations
Publisher

Abstract

quantum computing is the emerging technology in the new era and is very promising, not only quantum computers substantially accelerate what classical computers are able to do nowadays but they are also capable of providing answers that classical computers never could. Using reversible logic in designing quantum circuits has many advantages such as lowering power consumption, reducing heat dissemination, and decreasing quantum cost, ancilla inputs, and garbage outputs that lead to even higher performance in quantum computers. Decoders have many utilizations in digital circuits any function in form of SOP or POS can be implemented using decoders, counters, and ROMs have also used decoder modules in their designs in this article two novel designs for 2:4 and 3:8 decoder have been proposed that has been proved to have less quantum cost, unused outputs, and ancilla inputs when it comes to comparison with recent researches that have been done concerning this field.

DOI
10.1109/csicc52343.2021.9420575

Related papers

Design and analysis of a novel reversible encoder/decoder

Michael Nachtigal, Nagarajan Ranganathan

Reversible computation differs from traditional computation in that it preserves information while manipulating it. This new design paradigm has very attractive thermodynamic consequences and holds many applications in current and emerging technologies. Modern computers can reduce power consumption by taking advantage of reversibility, and quantum computers operate reversibly. Researchers have already proposed reversible designs of many common arithmetic and logical units, including adders, multipliers, shifters, and even registers. Very little focused work has been done specifically on reversible encoder/decoder design. In this paper we propose a novel reversible encoder/decoder design and analyze it in terms of its quantum cost, garbage outputs, constant inputs, and quantum delay.

IEEE International Conference on Nanotechnology (IEEE-NANO)•Aug 1, 2011•22 citations

Design of Dedicated Reversible Quantum Circuitry for Square Computation

H. V. Jayashree, Himanshu Thapliyal, Vinod Kumar Agrawal

Quantum computation is modeled by quantum circuits. All the quantum operations are reversible so the quantum circuits can be built using reversible logic gates. Reversible computing is the emerging technology, its major role is in the field of quantum computing, optical computing, and design of low power nanocircuits. The most frequently used computational unit for digital signal processing and multimedia applications is multiplier. To compute square of an operand, regular multipliers are used in general. This paper proposes a dedicated quantum circuit for computing square of an operand efficiently compared to the existing multipliers in the literature. The squaring unit is mathematically modeled and its metrics quantum cost, garbage outputs and ancilla input, gate count are calculated. We compared the proposed design with the existing multipliers to compute square and found that proposed square unit is efficient in terms of quantum cost, garbage outputs, ancilla inputs and gate count. The proposed reversible square circuit has 63% to 85% improvement of quantum cost, garbage outputs, ancilla inputs and gate count over existing reversible multiplier circuits.

International Conference on VLSI Design•Jan 1, 2014•13 citations

A review on reversible logic gates

Bahijja Yahaya Galadima, Garba Shehu Musa Galadanci, Tijjani Abdulrazak +1 more

In recent years, reversible logic circuits have applications in the emerging field of digital signal processing, optical information processing, quantum computing and nano technology. Reversibility plays an important role when computations with minimal energy dissipation are considered. The main purpose of designing reversible logic is to decrease the number of reversible gates, garbage outputs, constant inputs, quantum cost, area, power, delay and hardware complexity of the reversible circuits. This paper reveals a comparative review on various reversible logic gates. This paper provides some reversible logic gates, which can be used in designing more complex systems having reversible circuits and can execute more complicated operations using quantum computers. Future digital technology will use reversible logic gates in order to reduce the power consumption and propagation delay as it effectively provides negligible loss of information in the circuit. Keywords: Garbage output, Power dissipation, quantum cost, Reversible Gate, Reversible logic,

Bayero Journal of Pure and Applied Sciences•Apr 15, 2020•8 citations

A new reversible design of BCD adder

Himanshu Thapliyal, Nagarajan Ranganathan

Reversible logic is one of the emerging technologies having promising applications in quantum computing. In this work, we present new design of the reversible BCD adder that has been primarily optimized for the number of ancilla input bits and the number of garbage outputs. The number of ancilla input bits and the garbage outputs is primarily considered as an optimization criteria as it is extremely difficult to realize a quantum computer with many qubits. As the optimization of ancilla input bits and the garbage outputs may degrade the design in terms of the quantum cost and the delay, thus the quantum cost and the delay parameters are also considered for optimization with primary focus towards the optimization of the number of ancilla input bits and the garbage outputs. Firstly, we propose a new design of the reversible ripple carry adder having the input carry Co and is designed with no ancilla input bits. The proposed reversible ripple carry adder design with no ancilla input bits has less quantum cost and the logic depth (delay) compared to its existing counterparts. The existing reversible Peres gate and a new reversible gate called the TR gate is efficiently utilized to improve the quantum cost and the delay of the reversible ripple carry adder. The improved quantum design of the TR gate is also illustrated. Finally, the reversible design of the BCD adder is presented which is based on a 4 bit reversible binary adder to add the BCD number, and finally the conversion of the binary result to the BCD format using a reversible binary to BCD converter.

Design, Automation, and Test in Europe•Mar 1, 2011•66 citations

Reversible 2:4 Decoder Using Universal Fredkin Gate

Gudipati Nikhil, Balkonda Sharanya, P. Bharath Reddy +1 more

The technologies like quantum computing, Nanotechnology is emerging due to the greater research in reversible logic. It has the power reduction capability the same mechanism is also having in the quantum computing. Designing a quantum circuit among various combinational circuits the decoder has capability to change binary information of input lines to distinct output lines and also there are many applications where decoder is the main basic component. In this paper a comprehensive introduction of basic gates used to design n to 2nUniversal Quantum decoder, here n represents the no of inputs are mentioned. The proposed 2:4 decoder circuit is designed using a universal reversible Fredkin gates and Feynman gate. The proposed work is simulated using IBM Quantum Composer. In comparison to existing quantum decoders the proposed decoder design has optimum values in all the parameters considered.

International Conference on Communication and Electronics Systems (ICCES)•Jul 8, 2021•6 citations

Design of efficient reversible logic-based binary and BCD adder circuits

Himanshu Thapliyal, Nagarajan Ranganathan

Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.

arXiv:1712.02630•ACM Journal on Emerging Technologies in Computing Systems•Sep 1, 2013•111 citations
quantum computing is the emerging technology in the new era and is very promising, not only quantum computers substantially accelerate what classical computers are able to do nowadays but they are also capable of providing answers that classical computers never could. Using reversible logic in designing quantum circuits has many advantages such as lowering power consumption, reducing heat dissemination, and decreasing quantum cost, ancilla inputs, and garbage outputs that lead to even higher performance in quantum computers. Decoders have many utilizations in digital circuits any function in form of SOP or POS can be implemented using decoders, counters, and ROMs have also used decoder modules in their designs in this article two novel designs for 2:4 and 3:8 decoder have been proposed that has been proved to have less quantum cost, unused outputs, and ancilla inputs when it comes to comparison with recent researches that have been done concerning this field.
Reversible computation differs from traditional computation in that it preserves information while manipulating it. This new design paradigm has very attractive thermodynamic consequences and holds many applications in current and emerging technologies. Modern computers can reduce power consumption by taking advantage of reversibility, and quantum computers operate reversibly. Researchers have already proposed reversible designs of many common arithmetic and logical units, including adders, multipliers, shifters, and even registers. Very little focused work has been done specifically on reversible encoder/decoder design. In this paper we propose a novel reversible encoder/decoder design and analyze it in terms of its quantum cost, garbage outputs, constant inputs, and quantum delay.
Quantum computation is modeled by quantum circuits. All the quantum operations are reversible so the quantum circuits can be built using reversible logic gates. Reversible computing is the emerging technology, its major role is in the field of quantum computing, optical computing, and design of low power nanocircuits. The most frequently used computational unit for digital signal processing and multimedia applications is multiplier. To compute square of an operand, regular multipliers are used in general. This paper proposes a dedicated quantum circuit for computing square of an operand efficiently compared to the existing multipliers in the literature. The squaring unit is mathematically modeled and its metrics quantum cost, garbage outputs and ancilla input, gate count are calculated. We compared the proposed design with the existing multipliers to compute square and found that proposed square unit is efficient in terms of quantum cost, garbage outputs, ancilla inputs and gate count. The proposed reversible square circuit has 63% to 85% improvement of quantum cost, garbage outputs, ancilla inputs and gate count over existing reversible multiplier circuits.
In recent years, reversible logic circuits have applications in the emerging field of digital signal processing, optical information processing, quantum computing and nano technology. Reversibility plays an important role when computations with minimal energy dissipation are considered. The main purpose of designing reversible logic is to decrease the number of reversible gates, garbage outputs, constant inputs, quantum cost, area, power, delay and hardware complexity of the reversible circuits. This paper reveals a comparative review on various reversible logic gates. This paper provides some reversible logic gates, which can be used in designing more complex systems having reversible circuits and can execute more complicated operations using quantum computers. Future digital technology will use reversible logic gates in order to reduce the power consumption and propagation delay as it effectively provides negligible loss of information in the circuit. Keywords: Garbage output, Power dissipation, quantum cost, Reversible Gate, Reversible logic,
Reversible logic is one of the emerging technologies having promising applications in quantum computing. In this work, we present new design of the reversible BCD adder that has been primarily optimized for the number of ancilla input bits and the number of garbage outputs. The number of ancilla input bits and the garbage outputs is primarily considered as an optimization criteria as it is extremely difficult to realize a quantum computer with many qubits. As the optimization of ancilla input bits and the garbage outputs may degrade the design in terms of the quantum cost and the delay, thus the quantum cost and the delay parameters are also considered for optimization with primary focus towards the optimization of the number of ancilla input bits and the garbage outputs. Firstly, we propose a new design of the reversible ripple carry adder having the input carry Co and is designed with no ancilla input bits. The proposed reversible ripple carry adder design with no ancilla input bits has less quantum cost and the logic depth (delay) compared to its existing counterparts. The existing reversible Peres gate and a new reversible gate called the TR gate is efficiently utilized to improve the quantum cost and the delay of the reversible ripple carry adder. The improved quantum design of the TR gate is also illustrated. Finally, the reversible design of the BCD adder is presented which is based on a 4 bit reversible binary adder to add the BCD number, and finally the conversion of the binary result to the BCD format using a reversible binary to BCD converter.
The technologies like quantum computing, Nanotechnology is emerging due to the greater research in reversible logic. It has the power reduction capability the same mechanism is also having in the quantum computing. Designing a quantum circuit among various combinational circuits the decoder has capability to change binary information of input lines to distinct output lines and also there are many applications where decoder is the main basic component. In this paper a comprehensive introduction of basic gates used to design n to 2nUniversal Quantum decoder, here n represents the no of inputs are mentioned. The proposed 2:4 decoder circuit is designed using a universal reversible Fredkin gates and Feynman gate. The proposed work is simulated using IBM Quantum Composer. In comparison to existing quantum decoders the proposed decoder design has optimum values in all the parameters considered.
Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.