Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Thermal management of a 3D packaging structure for superconducting quantum annealing machines

Wei Feng, Katsuya Kikuchi, Mutsuo Hidaka, Hirotake Yamamori, Yuuki Araga, Kazumasa Makise, Shiro Kawabata

Published Apr 26, 2021• 13 citations
Publisher

Abstract

Quantum annealing (QA) is a computing paradigm for solving combinatorial optimization problems by finding the low-energy configurations of complicated Ising models through quantum fluctuation. Recently, because of the strictly limited number of superconducting qubits per chip, three-dimensional (3D) integrated technologies have attracted great attention for realizing a practical large-scale QA machine. Because a cryogenic environment is required for qubit chip operation, the less-effective heat transfer in the stacked structure has become a major concern. In the present paper, a method to realize a sufficiently low temperature for quantum operation in large-scale superconducting QA machines based on 3D packaging technology is proposed and demonstrated numerically. We reveal that the heating in such a 3D structure, which seriously reduces the quantum coherence of qubit chips, is effectively prevented by adding through-silicon vias (TSVs). Accordingly, the temperature of the qubit chip is drastically reduced from 57.8 mK to 16.4 mK. Our results indicate that using TSVs are a powerful and simple approach to realizing practical large-scale superconducting QA machines.

DOI
10.1063/5.0039822

Related papers

Solid-state qubits integrated with superconducting through-silicon vias

D. Yost, Mollie E. Schwartz, Justin Mallek +14 more

Abstract As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays—provided they are compact enough to support densely-packed qubit systems without compromising qubit performance or low-loss signal and control routing. In this work, we demonstrate the integration of superconducting, high-aspect ratio TSVs—10 μm wide by 20 μm long by 200 μm deep—with superconducting qubits. We utilize TSVs for baseband control and high-fidelity microwave readout of qubits using a two-chip, bump-bonded architecture. We also validate the fabrication of qubits directly upon the surface of a TSV-integrated chip. These key 3D-integration milestones pave the way for the control and readout of high-density superconducting qubit arrays using superconducting TSVs.

arXiv:1912.10942•npj Quantum Information•Jul 3, 2020•147 citations

Development of Via-First TSV and Backside Interconnect Process for Large-Scale Superconducting Quantum Annealing Circuits

Naoya Watanabe, Yuuki Araga, Ayuka Morioka +3 more

To realize a large-scale quantum-annealing machine, the size of the quantum annealing circuit chip should be increased. However, when the superconducting circuit chip is large and input signal frequency is high, cavity resonance can occur into the Si chip, causing circuit malfunctions. In this study, we developed a through silicon via (TSV) and backside interconnect process to suppress cavity resonance of the quantum annealing circuit chip. To prevent damage to the superconducting quantum annealing circuit from etching ions and heat during the TSV and backside interconnect formation, we formed the via-first TSVs and backside interconnect before the fabrication of the superconducting quantum annealing circuit. Through this process, TSVs (diameter: 60 µm, depth: 395 µm), including backside interconnects with superconductivity, were formed in a 100 mm high resistivity Si wafer. We also investigated the effect of TSV on the cavity resonance by high-frequency measurement of samples with/without TSVs and backside interconnect. The results demonstrated that the cavity resonance was suppressed by the TSVs and backside interconnect.

IEEE Electronic Components and Technology Conference (ECTC)•May 27, 2025•1 citation

Fabrication of superconducting through-silicon vias

Justin Mallek, D. Yost, Danna Rosenberg +15 more

Increasing circuit complexity within quantum systems based on superconducting qubits necessitates high connectivity while retaining qubit coherence. Classical micro-electronic systems have addressed interconnect density challenges by using 3D integration with interposers containing through-silicon vias (TSVs), but extending these integration techniques to superconducting quantum systems is challenging. Here, we discuss our approach for realizing high-aspect-ratio superconducting TSVs\textemdash 10 $μ$m wide by 20 $μ$m long by 200 $μ$m deep\textemdash with densities of 100 electrically isolated TSVs per square millimeter. We characterize the DC and microwave performance of superconducting TSVs at cryogenic temperatures and demonstrate superconducting critical currents greater than 20 mA. These high-aspect-ratio, high critical current superconducting TSVs will enable high-density vertical signal routing within superconducting quantum processors.

arXiv:2103.08536•Mar 15, 2021•43 citations

Through-silicon-via Architecture of 3D Integration for Superconducting Quantum Computing Application

J. Y. Yu, Qian Wang, Yao Rui Zheng +6 more

As one of the mainstream technique routes to implement universal quantum computing, superconducting qubit has been highly anticipated in recent years. However, the current widely-using 2D interconnect forms are not capable to meet the interconnect demand of high integration quantum processor in practical use due to wiring congestion, electromagnetic crosstalk, mechanical stress concentration, limited interior space of dilution refrigerator, etc. Therefore, quantum packaging will also need to be updated from 2D planar to 3D vertical architecture for higher integration density of superconducting qubits. In view of the current chiplet development trends in IC industry, we propose a 3D integration architecture based on the partition strategy of qubit chiplet and bus chiplet for superconducting quantum computing. This chiplet solution respectively utilizes the TSV and microbump structure in superconducting constituent material scheme to achieve low-loss intra-layer and inter-layer connection, which provides a possible technical route for modular large-scale quantum processor. To verify the feasibility of the above architecture, we design a kind of TiN-based TSV test vehicle including daisy chain structure to inspect the stabilization of DC resistance and transmission line structure for evaluation of DC/microwave signal transporting performance during the cool-down process. The TSVs in this test vehicle possess high aspect ratio (10:1,$30 \mu\mathrm{m}$diameter) fabricated by DRIE, coating with ∼200nm TiN layer by ALD. Subsequently, Al/TiN planar wiring layer is patterned by secondary lithography and ICP process. Then morphology observation, R.T./cryogenic electrical tests are successively carried out to evaluate the performance of TSV test vehicle. SEM along with EDS reveal that the TiN coating is conformal and defect-free with nearly vertical sidewall profile. Electrical tests show that TSV structures possess satisfactory linear ohmic characteristics and a wide range of process uniformity and repeatability at R.T. Additionally, the DC resistance and S21loss amplitude both exhibit abrupt drop during the cooling process, indicating that certain degree of superconducting transition has probably occurred. Therefore, the TiN-based TSV interposer elaborated in this paper combined with indium-based flip-chip TCB methods provides the possibility to implement 3D quantum integration architecture based on chiplet design.

IEEE Electronic Components and Technology Conference (ECTC)•May 1, 2023•9 citations

Development of TSV Interposer for Control and Readout of Superconducting Quantum Annealing Circuits

N. Watanabe, Yuuki Araga, A. Yamaguchi +4 more

Combinatorial optimization problems involve determining the optimal solution from a finite but extremely large number of combinations. Examples include logistics route optimization, drug and material development, and manufacturing process optimization. When solving combinatorial optimization problems using conventional computers with classical bits, calculations are performed for each combination, which requires an extremely long time when the number of combinations is large. Thus, quantum annealing machines are attracting attention as a method for solving this problem because they use quantum bits, which are superpositions of 0 and 1, thereby allowing calculations to be performed in an extremely short time. High-quality quantum bits and quantum-annealing circuits are essential for realizing this quantum-annealing machine. To this end, the NEC Corporation previously developed superconducting quantum annealing circuits using superconducting parametrons to solve combinatorial optimization problems with high speed and accuracy. The use of superconducting parametrons [1,2] renders this quantum-annealing machine resistant to noise and enables a long coherence time, that is, duration for maintaining the quantum state. Furthermore, the NEC Corporation successfully fabricated a superconducting quantum annealing circuit with eight qubit cells using superconducting parametrons and confirmed its operation using aluminum wire bonding technology. However, numerous power supplies and high-frequency signal readouts are required to operate many qubits. In this study, we developed a through-silicon via (TSV) interposer for control and readout of superconducting quantum annealing circuits. This process involves 16 steps: (a) deposition of hard mask; (b) hard mask etching; (c) deep Si etching; (d) hole cleaning to remove the photoresist and hard mask; (e) barrier-seed layer deposition; (e) electroplating for Cu filling; (f) chemical mechanical polishing (CMP), (g) formation of surface protection layer to protect the TSVs; (h) SiO2 bump formation; (i) formation of superconducting frontside interconnect; (j) Ti-In electrode formation; (k) bonding of support glass direct Si/Cu grinding and CMP for backside TSV reveal; (l) formation of backside insulator; (m) formation of backside interconnect with superconductivity (Ti-Al layer); (n) backside passivation layer formation; (o) opening of passivation layer; and (p) Ti-Au electrode formation. Furthermore, we stacked the qubit chips on TSV interposers and evaluated the qubits inside a dilution refrigerator. As a result, we confirmed that controlling the qubits and readout qubit signals via the TSV interposer is possible, and that the qubits operate correctly.

IMAPSource Proceedings•Aug 17, 2026•0 citations

Design and Operation of Wafer-Scale Packages Containing >500 Superconducting Qubits

Oscar W. Kennedy, Waqas Ahmad, Robert Armstrong +14 more

Packages capable of supporting large arrays of high-coherence superconducting qubits are vital for the realisation of fault-tolerant quantum computers and the necessary high-throughput metrology required to optimise fabrication and manufacturing processes. We present a wafer-scale packaging architecture supporting over 500 qubits on a single 3-inch die. The package is engineered to suppress parasitic RF modes, and to mitigate material loss through simulation-informed design while managing differential thermal contraction to ensure robust operation at millikelvin temperatures. System-level heat-load calculations from a large wiring payload show this package may be operated in commercial dilution refrigerators. Measurements of the qubits loaded into the package show median $T_1$, $T_{2e} \sim 100~μ$s ($\sim$100 qubits) alongside readout with median fidelity of 97.5% (54 qubits) and a median qubit temperature of 36 mK (54 qubits). These results validate the performance of these packages and demonstrate that large-scale integration can be achieved without compromising device performance. Finally, we highlight the utility of these packages as a tool for high throughput feedback on qubit figures of merit over large sample sizes, allowing identification of performance outliers in the tails of the coherence distribution, a critical capability for informing fabrication and manufacture of high-quality quantum qubits and quantum processors.

quant-pharXiv:2602.12773•Feb 16, 2026•3 citations
Quantum annealing (QA) is a computing paradigm for solving combinatorial optimization problems by finding the low-energy configurations of complicated Ising models through quantum fluctuation. Recently, because of the strictly limited number of superconducting qubits per chip, three-dimensional (3D) integrated technologies have attracted great attention for realizing a practical large-scale QA machine. Because a cryogenic environment is required for qubit chip operation, the less-effective heat transfer in the stacked structure has become a major concern. In the present paper, a method to realize a sufficiently low temperature for quantum operation in large-scale superconducting QA machines based on 3D packaging technology is proposed and demonstrated numerically. We reveal that the heating in such a 3D structure, which seriously reduces the quantum coherence of qubit chips, is effectively prevented by adding through-silicon vias (TSVs). Accordingly, the temperature of the qubit chip is drastically reduced from 57.8 mK to 16.4 mK. Our results indicate that using TSVs are a powerful and simple approach to realizing practical large-scale superconducting QA machines.
Abstract As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays—provided they are compact enough to support densely-packed qubit systems without compromising qubit performance or low-loss signal and control routing. In this work, we demonstrate the integration of superconducting, high-aspect ratio TSVs—10 μm wide by 20 μm long by 200 μm deep—with superconducting qubits. We utilize TSVs for baseband control and high-fidelity microwave readout of qubits using a two-chip, bump-bonded architecture. We also validate the fabrication of qubits directly upon the surface of a TSV-integrated chip. These key 3D-integration milestones pave the way for the control and readout of high-density superconducting qubit arrays using superconducting TSVs.
To realize a large-scale quantum-annealing machine, the size of the quantum annealing circuit chip should be increased. However, when the superconducting circuit chip is large and input signal frequency is high, cavity resonance can occur into the Si chip, causing circuit malfunctions. In this study, we developed a through silicon via (TSV) and backside interconnect process to suppress cavity resonance of the quantum annealing circuit chip. To prevent damage to the superconducting quantum annealing circuit from etching ions and heat during the TSV and backside interconnect formation, we formed the via-first TSVs and backside interconnect before the fabrication of the superconducting quantum annealing circuit. Through this process, TSVs (diameter: 60 µm, depth: 395 µm), including backside interconnects with superconductivity, were formed in a 100 mm high resistivity Si wafer. We also investigated the effect of TSV on the cavity resonance by high-frequency measurement of samples with/without TSVs and backside interconnect. The results demonstrated that the cavity resonance was suppressed by the TSVs and backside interconnect.
Increasing circuit complexity within quantum systems based on superconducting qubits necessitates high connectivity while retaining qubit coherence. Classical micro-electronic systems have addressed interconnect density challenges by using 3D integration with interposers containing through-silicon vias (TSVs), but extending these integration techniques to superconducting quantum systems is challenging. Here, we discuss our approach for realizing high-aspect-ratio superconducting TSVs\textemdash 10 μμμm wide by 20 μμμm long by 200 μμμm deep\textemdash with densities of 100 electrically isolated TSVs per square millimeter. We characterize the DC and microwave performance of superconducting TSVs at cryogenic temperatures and demonstrate superconducting critical currents greater than 20 mA. These high-aspect-ratio, high critical current superconducting TSVs will enable high-density vertical signal routing within superconducting quantum processors.
As one of the mainstream technique routes to implement universal quantum computing, superconducting qubit has been highly anticipated in recent years. However, the current widely-using 2D interconnect forms are not capable to meet the interconnect demand of high integration quantum processor in practical use due to wiring congestion, electromagnetic crosstalk, mechanical stress concentration, limited interior space of dilution refrigerator, etc. Therefore, quantum packaging will also need to be updated from 2D planar to 3D vertical architecture for higher integration density of superconducting qubits. In view of the current chiplet development trends in IC industry, we propose a 3D integration architecture based on the partition strategy of qubit chiplet and bus chiplet for superconducting quantum computing. This chiplet solution respectively utilizes the TSV and microbump structure in superconducting constituent material scheme to achieve low-loss intra-layer and inter-layer connection, which provides a possible technical route for modular large-scale quantum processor. To verify the feasibility of the above architecture, we design a kind of TiN-based TSV test vehicle including daisy chain structure to inspect the stabilization of DC resistance and transmission line structure for evaluation of DC/microwave signal transporting performance during the cool-down process. The TSVs in this test vehicle possess high aspect ratio (10:1,30μm30 \mu\mathrm{m}30μmdiameter) fabricated by DRIE, coating with ∼200nm TiN layer by ALD. Subsequently, Al/TiN planar wiring layer is patterned by secondary lithography and ICP process. Then morphology observation, R.T./cryogenic electrical tests are successively carried out to evaluate the performance of TSV test vehicle. SEM along with EDS reveal that the TiN coating is conformal and defect-free with nearly vertical sidewall profile. Electrical tests show that TSV structures possess satisfactory linear ohmic characteristics and a wide range of process uniformity and repeatability at R.T. Additionally, the DC resistance and S21loss amplitude both exhibit abrupt drop during the cooling process, indicating that certain degree of superconducting transition has probably occurred. Therefore, the TiN-based TSV interposer elaborated in this paper combined with indium-based flip-chip TCB methods provides the possibility to implement 3D quantum integration architecture based on chiplet design.
Combinatorial optimization problems involve determining the optimal solution from a finite but extremely large number of combinations. Examples include logistics route optimization, drug and material development, and manufacturing process optimization. When solving combinatorial optimization problems using conventional computers with classical bits, calculations are performed for each combination, which requires an extremely long time when the number of combinations is large. Thus, quantum annealing machines are attracting attention as a method for solving this problem because they use quantum bits, which are superpositions of 0 and 1, thereby allowing calculations to be performed in an extremely short time. High-quality quantum bits and quantum-annealing circuits are essential for realizing this quantum-annealing machine. To this end, the NEC Corporation previously developed superconducting quantum annealing circuits using superconducting parametrons to solve combinatorial optimization problems with high speed and accuracy. The use of superconducting parametrons [1,2] renders this quantum-annealing machine resistant to noise and enables a long coherence time, that is, duration for maintaining the quantum state. Furthermore, the NEC Corporation successfully fabricated a superconducting quantum annealing circuit with eight qubit cells using superconducting parametrons and confirmed its operation using aluminum wire bonding technology. However, numerous power supplies and high-frequency signal readouts are required to operate many qubits. In this study, we developed a through-silicon via (TSV) interposer for control and readout of superconducting quantum annealing circuits. This process involves 16 steps: (a) deposition of hard mask; (b) hard mask etching; (c) deep Si etching; (d) hole cleaning to remove the photoresist and hard mask; (e) barrier-seed layer deposition; (e) electroplating for Cu filling; (f) chemical mechanical polishing (CMP), (g) formation of surface protection layer to protect the TSVs; (h) SiO2 bump formation; (i) formation of superconducting frontside interconnect; (j) Ti-In electrode formation; (k) bonding of support glass direct Si/Cu grinding and CMP for backside TSV reveal; (l) formation of backside insulator; (m) formation of backside interconnect with superconductivity (Ti-Al layer); (n) backside passivation layer formation; (o) opening of passivation layer; and (p) Ti-Au electrode formation. Furthermore, we stacked the qubit chips on TSV interposers and evaluated the qubits inside a dilution refrigerator. As a result, we confirmed that controlling the qubits and readout qubit signals via the TSV interposer is possible, and that the qubits operate correctly.
Packages capable of supporting large arrays of high-coherence superconducting qubits are vital for the realisation of fault-tolerant quantum computers and the necessary high-throughput metrology required to optimise fabrication and manufacturing processes. We present a wafer-scale packaging architecture supporting over 500 qubits on a single 3-inch die. The package is engineered to suppress parasitic RF modes, and to mitigate material loss through simulation-informed design while managing differential thermal contraction to ensure robust operation at millikelvin temperatures. System-level heat-load calculations from a large wiring payload show this package may be operated in commercial dilution refrigerators. Measurements of the qubits loaded into the package show median T1T_1T1​, T2e∼100 μT_{2e} \sim 100~μT2e​∼100 μs ($\sim$100 qubits) alongside readout with median fidelity of 97.5% (54 qubits) and a median qubit temperature of 36 mK (54 qubits). These results validate the performance of these packages and demonstrate that large-scale integration can be achieved without compromising device performance. Finally, we highlight the utility of these packages as a tool for high throughput feedback on qubit figures of merit over large sample sizes, allowing identification of performance outliers in the tails of the coherence distribution, a critical capability for informing fabrication and manufacture of high-quality quantum qubits and quantum processors.