Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Gaussian quantum metrology for fundamental physics

Dominic Branford

Published Sep 15, 2026• 1 citation
Publisher

Abstract

Optical and optomechanical systems are exploited for quantum technologies to perform highly precise measurements for fundamental physics as well as biological and engineering tasks. Theoretical studies using tools from statistics and quantum information can greatly aid studies of the sensing capabilities of quantum systems and experimental designs. These allow us to quantify the amount of information about a parameter encoded in a quantum state itself and examine how that can be extracted through measurements. In this thesis we show how mechanical squeezing and measurements beyond position can be utilised to improve the precision of wavepacket expansion measurements which can test collapse models of quantum mechanics. Particularly, that squeezing can compensate for the free-fall time which is often the most significant limiting factor in such experiments, and measurements of other quadratures can offer increased precision. We demonstrate that the use of additional optical fields to measure the displacement of a free mass in a radiation-pressure limited interferometer cannot surpass the ultimate precision of the single-mode interferometer. This work applies to the likes of laser-interferometric gravitational wave detectors. Finally, we venture into multi-parameter estimation: we calculate bounds for multi-mode Gaussian states used to estimate many phase shifts and optimise over the input states. In contrast to the—far less experimentally feasible—multi-mode generalisations of N00N states we see no significant improvement when using multi-mode Gaussian states for the task. Given their comparable performance in single-phase estimation this is a new limitation of Gaussian states appearing only at the multi-parameter level.

DOI
10.82444/warw.33816466

Related papers

Quantum metrology using Gaussian states and efficient Bayesian error certification

오창훈

Precise measurement of physical quantities plays a crucial role in the development of science and technology. The main purpose of the dissertation is two-fold: to investigate the ultimate precision for estimation of physical quantities using Gaussian states and to propose an efficient method for certification of Bayesian error region in general quantum parameter estimation. \nIn the first part, we begin with analyzing sensitivity for estimating a phase difference in an optical interferometer. Optical interferometry is widely used in science and industry for measuring small displacements. Recently, a large-scale optical interferometer so-called the Laser interferometer Gravitational-Wave Observatory (LIGO) has succeeded in detecting a gravitational wave, the signal of which is extremely small. On the other hand, it has been shown that a non-classical feature of quantum states can improve the \nsensitivity of estimation, such as in optical interferometer, including the LIGO. From a practical point of view, we inspect the practically achievable precision using non-classical Gaussian states in Mach-Zehnder interferometer with feasible measurements and realistic photon loss. We then investigate the precision of single-mode phase estimation using Gaussian measurement, which can be realized by using homodyne detection, and show that non-Gaussian measurement is necessary to utilize the power of Gaussian input \nprobes optimally. Finally, we find the optimal measurement for general Gaussian quantum metrology and identify three distinct optimal measurements corresponding to different circumstances. \nIn the second part, we study the Bayesian error region, which is a crucial concept for a general estimation process. When estimating a physical quantity, one has to supply the error interval (single-parameter) or error region (multi-parameter) as well as the estimate. However, it has been shown that as the dimension of quantum systems of interest grows, it becomes intractable to calculate the size and credibility of Bayesian error \nregions. As an alternative, we derive an analytical expression for the properties, the size and credibility, of Bayesian error regions, in an asymptotic regime. We then propose an efficient numerical method to calculate them for high-dimensional quantum systems even in a non-asymptotic regime.

•Nov 23, 2020•0 citations

Precision of Parameter Estimation in Quantum Metrology

Chenglong You

The fundamental precision limit of an interferometer is crucial since it bounds the best possible sensitivity one could achieve using such a device. This thesis will focus on several different interferometers and try to give the ultimate precision bounds by carefully counting all the resources used in the interferometers. The thesis begins with the basics of the quantum state of light. The fundamentals of quantum metrology are also reviewed and discussed. More specifically, the terminology of classical and quantum Cram\'er-Rao bound and classical and quantum Fisher information are introduced. Chapter 3 discusses the conclusive precision bounds in two-mode interferometer such as Mach-Zehnder interferometer (MZI) and SU(1,1) interferometer. I revisit the quantum Fisher information approach of these two interferometers and show the discrepancy of phase sensitivity on the physically same setup. Then I establish fundamental precision estimation bounds for such device, due to the reason that many works of literature fail to accurately count the resources and knowledge of phase-to-be-estimated used in the interferometers. The analysis suggests that for a MZI, one can never do better than SNL in phase sensitivity, when an input to one of the two ports is the vacuum. If one does not allow the detector to use any external phase reference or power resource, then the precision is limited by the SNL. For a SU(1,1) interferometer, firstly, when one of the input states is restricted to be a vacuum state, I showed that by using either the phase-averaging method or the quantum Fisher information matrix method, different phase configurations of the SU(1,1) interferometer result in the same QFI. Secondly, I compared the results of the phase-averaging method and the quantum Fisher information matrix method, and then I argued that for an SU(1,1) interferometer, phase averaging or quantum Fisher information matrix method is generally required, and they are equivalent. Finally, I used the quantum Fisher information matrix method to calculate the precision limit for other common input states, such as two coherent state inputs or coherent state with squeezed vacuum inputs. In chapter 4, I will consider a passive multi-mode interferometer for multiparameter phase estimation. It was suggested that optical networks with relatively inexpensive overhead---single photon Fock states, passive optical elements, and single photon detection---can show significant improvements over classical strategies for single-parameter estimation, when the number of modes in the network is small. In this chapter, I analytically compute the quantum Cramer-Rao bound to show these

Civil War Book Review•Mar 18, 2019•0 citations

Multiparameter Gaussian quantum metrology

Rosanna Nichols, Pietro Liuzzo-Scorpo, Paul A. Knott +1 more

We investigate the ultimate precision achievable in Gaussian quantum metrology. We derive general analytical expressions for the quantum Fisher information matrix and for the measurement compatibility condition, ensuring asymptotic saturability of the quantum Cram\'er-Rao bound, for the estimation of multiple parameters encoded in multimode Gaussian states. We then apply our results to the joint estimation of a phase shift and two parameters characterizing Gaussian phase covariant noise in optical interferometry. In such a scheme, we show that two-mode displaced squeezed input probes with optimally tuned squeezing and displacement fulfill the measurement compatibility condition and enable the simultaneous estimation of all three parameters, with an advantage over individual estimation schemes that quickly rises with increasing mean energy of the probes.

arXiv:1711.09132•Physical Review A•Jul 11, 2018•137 citations

Multi-parameter optimisation of quantum optical systems

Harry J. Slatyer

Quantum optical systems are poised to become integral components of technologies of the future. While there is growing commercial interest in these systems---for applications in information processing, secure communication and precision metrology---there remain significant technical challenges to overcome before widespread adoption is possible. In this thesis we consider the general problem of optimising quantum optical systems, with a focus on sensing and information processing applications. We investigate four different classes of system with varying degrees of generality and complexity, and demonstrate four corresponding optimisation techniques. At the most specific end of the spectrum---where behaviour is best understood---we consider the problem of interferometric sensitivity enhancement, specifically in the context of long-baseline gravitational wave detectors. We investigate the use of an auxiliary optomechanical system to generate squeezed light exhibiting frequency-dependent quadrature rotation. Such rotation is necessary to evade the effect of quantum back action and achieve broadband sensitivity beyond the standard quantum limit. We find that a cavity optomechanical system is generally unsuitable for this purpose, since the quadrature rotation occurs in the opposite direction to that required for broadband sensitivity improvement. Next we introduce a general technique to engineer arbitrary optical spring potentials in cavity optomechanical systems. This technique has the potential to optimise many types of sensors relying on the optical spring effect. As an example, we show that this technique could yield an enhancement in sensitivity by a factor of 5 when applied to a certain gravitational sensor based on a levitated cavity mirror. We then consider a particular nanowire-based optomechanical system with potential applications in force sensing. We demonstrate a variety of ways to improve its sensitivity to transient forces. We first apply a non-stationary feedback cooling protocol to the system, and achieve an improvement in peak signal-to-noise ratio by a factor of 3, corresponding to a force resolution of 0.2fN. We then implement two non-stationary estimation schemes, which involve post-processing data taken in the absence of physical feedback cooling, to achieve a comparable enhancement in performance without the need for additional experimental complexity. Finally, to address the most complex of systems, we present a general-purpose machine learning algorithm capable of automatically modelling and optimising arbitrary physical systems without human input. To demonstrate the potential of the algorithm we apply it to a magneto-optical trap used for a quantum memory, and achieve an improvement in optical depth from 138 to 448. The four techniques presented differ significantly in their style and the types of systems to which they are applicable. Successfully harnessing the full range of such optimisation procedures will be vital in unlocking the potential of quantum optical systems in the technologies of the future

•Jan 1, 2018•0 citations

Quantum accuracy limits and benchmarks in continuous variable systems

Mariona Aspachs

In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.

•Jan 1, 2011•0 citations

From States to Measurements: Information-Theoretic Measures for Quantum Characterisation

Aritra Das

Quantum states and measurements are two central physical objects in the theory of quantum mechanics. The preparation, control and measurement of quantum states lies at the heart of modern quantum information processing protocols ranging from secure communication to quantum computation and precision sensing. And yet, the reliable operation of these advanced protocols ultimately rests on a far more essential prerequisite - our ability to calibrate, certify and benchmark the quantum states we prepare and the quantum measurements we perform. Quantum information theory provides a natural framework for these tasks, meaningfully connecting the resources we expend for characterisation with the accuracy and precision we can expect in return. While decades of advances in quantum information have refined our understanding of quantum characterisation and sharpened our practical ability to calibrate with enhanced precision, important questions about the fundamental limits of quantum characterisation remain unanswered. Although incorporating entanglement at the measurement stage is known to enhance the estimation of unknown quantum states, the extent of this improvement remains poorly understood. This leaves open a fundamental question on the utility of complex entangling measurement strategies, impeding progress towards bridging the significant gap between practically achievable precision and the ultimate theoretical quantum limit. Complementary to quantum state estimation, which is relatively well-established in theory and practice, the characterisation of quantum measurements lacks a rigorous information-theoretic foundation, leading to a dearth of principled benchmarks and provably optimal strategies despite growing experimental interest. This thesis develops and applies information-theoretic tools to answer questions in quantum characterisation, with an eye to enabling practical improvements beyond current techniques in the field. First, we introduce a computable measure of entanglement enhancement for quantum state estimation and study its variation across general multi-parameter estimation problems for higher-dimensional quantum states. We show that the entanglement enhancement is maximised for full qudit state tomography but grows only linearly with system dimension even when allowing an asymptotically large number of entangling operations. Our proposed tight upper bound to entanglement enhancement therefore constitutes a strong limitation on the utility of such entangling measurements. Next, we formulate the dual problem of quantum detector estimation, developing a comprehensive framework for maximally precise calibration centred around a newly introduced quantity - the detector quantum Fisher information. This information-theoretic measure stipulates the ultimate precision attainable for measurement calibration and identifies the optimal input states that achieve this precision. Further, our framework enables the first provably optimal detector estimation experiment and reveals the scope for entanglement-based enhancements, thereby placing measurement characterisation on equal footing with state characterisation. Considered together, these results suggest two contrasting conclusions about quantum characterisation. On the one hand, they show that for quantum state estimation, increasingly powerful entangling measurements offer only diminishing returns at the ultimate precision limit. On the other hand, they highlight practical quantum advantages available for detector estimation by providing a framework that can improve calibration performance and guide future experimental design. More broadly, these results complete and advance the triad of state, process, and detector characterisation, positioning quantum information measures as not merely abstract bounds, but practical guides for deciding when complex quantum resources are genuinely worth deploying and where near-term quantum advantages are most likely to be realised.

•Jan 1, 2026•0 citations
Optical and optomechanical systems are exploited for quantum technologies to perform highly precise measurements for fundamental physics as well as biological and engineering tasks. Theoretical studies using tools from statistics and quantum information can greatly aid studies of the sensing capabilities of quantum systems and experimental designs. These allow us to quantify the amount of information about a parameter encoded in a quantum state itself and examine how that can be extracted through measurements. In this thesis we show how mechanical squeezing and measurements beyond position can be utilised to improve the precision of wavepacket expansion measurements which can test collapse models of quantum mechanics. Particularly, that squeezing can compensate for the free-fall time which is often the most significant limiting factor in such experiments, and measurements of other quadratures can offer increased precision. We demonstrate that the use of additional optical fields to measure the displacement of a free mass in a radiation-pressure limited interferometer cannot surpass the ultimate precision of the single-mode interferometer. This work applies to the likes of laser-interferometric gravitational wave detectors. Finally, we venture into multi-parameter estimation: we calculate bounds for multi-mode Gaussian states used to estimate many phase shifts and optimise over the input states. In contrast to the—far less experimentally feasible—multi-mode generalisations of N00N states we see no significant improvement when using multi-mode Gaussian states for the task. Given their comparable performance in single-phase estimation this is a new limitation of Gaussian states appearing only at the multi-parameter level.
Precise measurement of physical quantities plays a crucial role in the development of science and technology. The main purpose of the dissertation is two-fold: to investigate the ultimate precision for estimation of physical quantities using Gaussian states and to propose an efficient method for certification of Bayesian error region in general quantum parameter estimation. \nIn the first part, we begin with analyzing sensitivity for estimating a phase difference in an optical interferometer. Optical interferometry is widely used in science and industry for measuring small displacements. Recently, a large-scale optical interferometer so-called the Laser interferometer Gravitational-Wave Observatory (LIGO) has succeeded in detecting a gravitational wave, the signal of which is extremely small. On the other hand, it has been shown that a non-classical feature of quantum states can improve the \nsensitivity of estimation, such as in optical interferometer, including the LIGO. From a practical point of view, we inspect the practically achievable precision using non-classical Gaussian states in Mach-Zehnder interferometer with feasible measurements and realistic photon loss. We then investigate the precision of single-mode phase estimation using Gaussian measurement, which can be realized by using homodyne detection, and show that non-Gaussian measurement is necessary to utilize the power of Gaussian input \nprobes optimally. Finally, we find the optimal measurement for general Gaussian quantum metrology and identify three distinct optimal measurements corresponding to different circumstances. \nIn the second part, we study the Bayesian error region, which is a crucial concept for a general estimation process. When estimating a physical quantity, one has to supply the error interval (single-parameter) or error region (multi-parameter) as well as the estimate. However, it has been shown that as the dimension of quantum systems of interest grows, it becomes intractable to calculate the size and credibility of Bayesian error \nregions. As an alternative, we derive an analytical expression for the properties, the size and credibility, of Bayesian error regions, in an asymptotic regime. We then propose an efficient numerical method to calculate them for high-dimensional quantum systems even in a non-asymptotic regime.
The fundamental precision limit of an interferometer is crucial since it bounds the best possible sensitivity one could achieve using such a device. This thesis will focus on several different interferometers and try to give the ultimate precision bounds by carefully counting all the resources used in the interferometers. The thesis begins with the basics of the quantum state of light. The fundamentals of quantum metrology are also reviewed and discussed. More specifically, the terminology of classical and quantum Cram\'er-Rao bound and classical and quantum Fisher information are introduced. Chapter 3 discusses the conclusive precision bounds in two-mode interferometer such as Mach-Zehnder interferometer (MZI) and SU(1,1) interferometer. I revisit the quantum Fisher information approach of these two interferometers and show the discrepancy of phase sensitivity on the physically same setup. Then I establish fundamental precision estimation bounds for such device, due to the reason that many works of literature fail to accurately count the resources and knowledge of phase-to-be-estimated used in the interferometers. The analysis suggests that for a MZI, one can never do better than SNL in phase sensitivity, when an input to one of the two ports is the vacuum. If one does not allow the detector to use any external phase reference or power resource, then the precision is limited by the SNL. For a SU(1,1) interferometer, firstly, when one of the input states is restricted to be a vacuum state, I showed that by using either the phase-averaging method or the quantum Fisher information matrix method, different phase configurations of the SU(1,1) interferometer result in the same QFI. Secondly, I compared the results of the phase-averaging method and the quantum Fisher information matrix method, and then I argued that for an SU(1,1) interferometer, phase averaging or quantum Fisher information matrix method is generally required, and they are equivalent. Finally, I used the quantum Fisher information matrix method to calculate the precision limit for other common input states, such as two coherent state inputs or coherent state with squeezed vacuum inputs. In chapter 4, I will consider a passive multi-mode interferometer for multiparameter phase estimation. It was suggested that optical networks with relatively inexpensive overhead---single photon Fock states, passive optical elements, and single photon detection---can show significant improvements over classical strategies for single-parameter estimation, when the number of modes in the network is small. In this chapter, I analytically compute the quantum Cramer-Rao bound to show these
We investigate the ultimate precision achievable in Gaussian quantum metrology. We derive general analytical expressions for the quantum Fisher information matrix and for the measurement compatibility condition, ensuring asymptotic saturability of the quantum Cram\'er-Rao bound, for the estimation of multiple parameters encoded in multimode Gaussian states. We then apply our results to the joint estimation of a phase shift and two parameters characterizing Gaussian phase covariant noise in optical interferometry. In such a scheme, we show that two-mode displaced squeezed input probes with optimally tuned squeezing and displacement fulfill the measurement compatibility condition and enable the simultaneous estimation of all three parameters, with an advantage over individual estimation schemes that quickly rises with increasing mean energy of the probes.
Quantum optical systems are poised to become integral components of technologies of the future. While there is growing commercial interest in these systems---for applications in information processing, secure communication and precision metrology---there remain significant technical challenges to overcome before widespread adoption is possible. In this thesis we consider the general problem of optimising quantum optical systems, with a focus on sensing and information processing applications. We investigate four different classes of system with varying degrees of generality and complexity, and demonstrate four corresponding optimisation techniques. At the most specific end of the spectrum---where behaviour is best understood---we consider the problem of interferometric sensitivity enhancement, specifically in the context of long-baseline gravitational wave detectors. We investigate the use of an auxiliary optomechanical system to generate squeezed light exhibiting frequency-dependent quadrature rotation. Such rotation is necessary to evade the effect of quantum back action and achieve broadband sensitivity beyond the standard quantum limit. We find that a cavity optomechanical system is generally unsuitable for this purpose, since the quadrature rotation occurs in the opposite direction to that required for broadband sensitivity improvement. Next we introduce a general technique to engineer arbitrary optical spring potentials in cavity optomechanical systems. This technique has the potential to optimise many types of sensors relying on the optical spring effect. As an example, we show that this technique could yield an enhancement in sensitivity by a factor of 5 when applied to a certain gravitational sensor based on a levitated cavity mirror. We then consider a particular nanowire-based optomechanical system with potential applications in force sensing. We demonstrate a variety of ways to improve its sensitivity to transient forces. We first apply a non-stationary feedback cooling protocol to the system, and achieve an improvement in peak signal-to-noise ratio by a factor of 3, corresponding to a force resolution of 0.2fN. We then implement two non-stationary estimation schemes, which involve post-processing data taken in the absence of physical feedback cooling, to achieve a comparable enhancement in performance without the need for additional experimental complexity. Finally, to address the most complex of systems, we present a general-purpose machine learning algorithm capable of automatically modelling and optimising arbitrary physical systems without human input. To demonstrate the potential of the algorithm we apply it to a magneto-optical trap used for a quantum memory, and achieve an improvement in optical depth from 138 to 448. The four techniques presented differ significantly in their style and the types of systems to which they are applicable. Successfully harnessing the full range of such optimisation procedures will be vital in unlocking the potential of quantum optical systems in the technologies of the future
In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.
Quantum states and measurements are two central physical objects in the theory of quantum mechanics. The preparation, control and measurement of quantum states lies at the heart of modern quantum information processing protocols ranging from secure communication to quantum computation and precision sensing. And yet, the reliable operation of these advanced protocols ultimately rests on a far more essential prerequisite - our ability to calibrate, certify and benchmark the quantum states we prepare and the quantum measurements we perform. Quantum information theory provides a natural framework for these tasks, meaningfully connecting the resources we expend for characterisation with the accuracy and precision we can expect in return. While decades of advances in quantum information have refined our understanding of quantum characterisation and sharpened our practical ability to calibrate with enhanced precision, important questions about the fundamental limits of quantum characterisation remain unanswered. Although incorporating entanglement at the measurement stage is known to enhance the estimation of unknown quantum states, the extent of this improvement remains poorly understood. This leaves open a fundamental question on the utility of complex entangling measurement strategies, impeding progress towards bridging the significant gap between practically achievable precision and the ultimate theoretical quantum limit. Complementary to quantum state estimation, which is relatively well-established in theory and practice, the characterisation of quantum measurements lacks a rigorous information-theoretic foundation, leading to a dearth of principled benchmarks and provably optimal strategies despite growing experimental interest. This thesis develops and applies information-theoretic tools to answer questions in quantum characterisation, with an eye to enabling practical improvements beyond current techniques in the field. First, we introduce a computable measure of entanglement enhancement for quantum state estimation and study its variation across general multi-parameter estimation problems for higher-dimensional quantum states. We show that the entanglement enhancement is maximised for full qudit state tomography but grows only linearly with system dimension even when allowing an asymptotically large number of entangling operations. Our proposed tight upper bound to entanglement enhancement therefore constitutes a strong limitation on the utility of such entangling measurements. Next, we formulate the dual problem of quantum detector estimation, developing a comprehensive framework for maximally precise calibration centred around a newly introduced quantity - the detector quantum Fisher information. This information-theoretic measure stipulates the ultimate precision attainable for measurement calibration and identifies the optimal input states that achieve this precision. Further, our framework enables the first provably optimal detector estimation experiment and reveals the scope for entanglement-based enhancements, thereby placing measurement characterisation on equal footing with state characterisation. Considered together, these results suggest two contrasting conclusions about quantum characterisation. On the one hand, they show that for quantum state estimation, increasingly powerful entangling measurements offer only diminishing returns at the ultimate precision limit. On the other hand, they highlight practical quantum advantages available for detector estimation by providing a framework that can improve calibration performance and guide future experimental design. More broadly, these results complete and advance the triad of state, process, and detector characterisation, positioning quantum information measures as not merely abstract bounds, but practical guides for deciding when complex quantum resources are genuinely worth deploying and where near-term quantum advantages are most likely to be realised.