Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Optics and Photon Counting

Linear SPAD array for quantum communication

Alfonso Incoronato, Fabio Severini, Francesca Madonini, Federica Villa, Franco Zappa

Published Apr 13, 2021• 4 citations
Publisher

Abstract

Quantum communication is a fast-growing field that takes advantage of the quantum physics laws to protect and secure sensitive data. This work takes part of the European project UNIQORN (Affordable Quantum Communication for Everyone: Revolutionizing the Ecosystem from Fabrication to Application) whose aim is to develop a Quantum System on Chip (QSoC) for telecom application. The Integrated Circuit (IC) designed contributes in the QRNG block of the system, tailored to communicate with the integrated non-linear optics circuit. Such detector is a 32×1 linear array based on Single-Photon Avalanche-Diode (SPAD) detectors for the generation of a raw random number, by revealing the position on the array of the single photon impinging on it, realized in a BCD 0.16 μm technology. The linear array architecture consists of 32 pixels, pitched at 125 μm, each made by 4 SPADs with different diameter (5 μm, 10 μm, 20 μm, 50 μm). Two operation modes are implemented: Single-Hit Mode, needed to reveal the (5-bit) position of the pixel triggered by a single photon, representing a random number, in a time window synchronous with the laser emission. Multi Hit Mode, used to identify a coincidence of a certain number of photons(more than one, two, three or four) detected within a specified time window, thanks to a multi threshold coincidence detection logic.

DOI
10.1117/12.2592091

Related papers

A Fully Integrated Quantum Random Number Generator for Cryptographic Application

Nicola Massari, Luca Parmesan, Alessandro Tontini +7 more

A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.

IEEE Transactions on Circuits and Systems I Regular Papers•Apr 16, 2026•0 citations

Linear SPAD array single- and multiple-photon coincidence- based Quantum Random Number Generator

Alfonso Incoronato, Fabio Severini, Enrico Conca +2 more

we presents a 32 × 1 linear Single Photon Avalanche Diode array for quantum communication applications. The array provides the position of the single photon detected, and can identify multiple photon coincidences.

OSA Optical Sensors and Sensing Congress 2021 (AIS, FTS, HISE, SENSORS, ES)•Jan 1, 2021•2 citations

Analysis of a quantum imaging system based on SPAD detection

Fabio Severini, Francesca Madonini, Federica Villa

The ability to generate and handle quantum correlations in twin-beam states is the foundation to overcome the imaging limitations imposed by classical light [1], relying on efficient detectors able to select temporal correlations among photons with maximized signal-to-noise ratio. Indeed, quantum information is contained in the interaction with the sample of just two photons, thus losing even one of them or mixing them up with background can completely compromise the experiment. To this end, assessing and evaluating the expected probability of measurement errors is of utmost importance to optimize the detector design. A typical experimental setup of a quantum imaging system based on Spontaneous Parametric Down Conversion (SPDC), the most effective way of producing temporally and spatially correlated entangled photons [2], involves a pump laser hitting a non-linear birefringent crystal producing a down-converted signal, some passive optical components to generate polarization-entangled photons and a pixelated photon detector that eventually reveals the position of coincident entangled photons. The overall detection efficiency of the measurement setup (i.e. heralding efficiency ηH) gathers all its possible losses and non-idealities of the mentioned setup components, namely the crystal conversion efficiency, the optical losses, the detector Photon Detection Efficiency (PDE) and fill-factor. In this study, we consider a detection based on a Single Photon Avalanche Diode (SPAD) array, able to detect coincidences on-chip and with event-driven architecture, which provides fast readout, low power consumption and optimized data throughput. However, related to every on-chip coincidence detection and event-driven based architecture, some operations require a certain amount of time to be performed that, combined with the generation of undesired single photons (both due to limited heralding efficiency and SPAD Dark Count Rate, DCR), yield to three measurement errors, here described with their related probabilities. Firstly, due to the finite duration of the coincidence window ∆tCOINC, there exist a probability Pfalseof wrongly detecting as coincident photons two single photons, and can be expressed as:\begin{equation*}{P_{false}} = \frac{{\left[ {2{\mu _{SOURCE{\text{ }}}}{\eta _H}\left( {1 - {\eta _H}} \right) + {\text{DCR}}} \right]\left( {1 - {e^{ - \left[ {2{\mu _{SOURCE}}{\eta _H}\left( {1 - {\eta _H}} \right) + {\text{DCR}}} \right]\Delta {t_{COINC}}}}} \right)}}{{{\mu _{SOURCE}}\eta _H^2 + \left[ {2{\mu _{SOURCE}}{\eta _H}\left( {1 - {\eta _H}} \right) + DCR} \right]\left( {1 - {e^{ - \left[ {2{\mu _{SOURCE}}{\eta _H}\left( {1 - {\eta _H}} \right) + {\text{DCR}}} \right]\Delta {t_{COINC}}}}} \right)}}\tag{1}\end{equation*}where µSOURCEis the number of photon pairs generated by an ideal non-linear crystal. Secondly, in the time needed for the array to "freeze" the pixels state after a coincidence event (∆tFREEZE) so that they can be readout, there is the probability Pspuriousof detecting a third spurious event after a coincidence has been detected, which is expressed as:\begin{equation*}{P_{spurious}} = 1 - {e^{ - \left[ {2{\mu _{SOURCE\eta }}_H\left( {1 - {\eta _H}} \right) + DCR} \right]\Delta {t_{FREEZE}}}}\tag{2}\end{equation*}

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•0 citations

SPADs for quantum random number generators and beyond

Samuel Burri, Damien Stucki, Y. Maruyama +3 more

Single-Photon Avalanche Diodes (SPADs) are solid-state photo-detectors capable of detecting single photons by exploiting the avalanche effect that occurs in the breakdown of a p-n junction biased above breakdown voltage. By this effect, a SPAD translates an incoming photon to a macroscopic current pulse. These devices are currently used for building medical devices characterized by a very high time resolution. An appealing application of SPAD is to use them as a basic block for building the entropy source of true random number generators. In this paper we focus on such application, and we explore the design challenges behind the realization of a quantum random number generator based on a massively parallel array of SPADs. The matrix under investigation comprises 512×128 independent cells that convert photons onto a raw bit-stream, which, as ensured by the properties of quantum physics, is characterized by a very high level of randomness. The sequences are read out in a 128-bit parallel bus, concatenated, and pipelined onto a de-biasing filter. Subsequently, we fabricated the proposed chip using a standard CMOS process. Our results, achieved on the manufactured device and coupling two matrices, show that our architecture can reach up to 5 Gbit/s while consuming 25pJ/bit, thus demonstrating scalability and performance for any random number generators based on SPADs.

Asia and South Pacific Design Automation Conference (ASP-DAC)•Jan 1, 2014•14 citations

16.3 A 16×16 pixels SPAD-based 128-Mb/s quantum random number generator with −74dB light rejection ratio and −6.7ppm/°C bias sensitivity on temperature

Nicola Massari, Leonardo Gasparini, Alessandro Tomasi +5 more

A robust true random number generator (TRNG), able to assure high quality output at different working conditions, is an attractive solution in secure communication application, because it increases resilience against possible external attacks. Among different TRNGs, quantum RNGs (QRNG) represent a good candidate for such systems, because of their compactness, low cost and performance [1–6]. They typically consist of a source of photons, such as an attenuated LED, coupled to a detector with single photon capability (SPAD). Many works in the literature have used a single detector [1–4] for random bit extraction. These devices are characterized by a limited bit rate [1], which can be increased by exploiting the arrival time of photons at the cost of circuit and system complexity [2–4]. Recent works [5–6] proposed to implement an array of detectors based on SPAD working in parallel thus extending the speed of QRNG up to 5 Gb/s [5]. Despite the high bit rate, the main drawback of [5] is the strong dependence of each pixel bias on the impinging light intensity which forces the system to work only for a narrow range of photon flux that poses several constraints on the design of the final QRNG system, e.g. the need of a feedback control loop to maintain a constant flux of photons, and of a uniform distribution of light over the entire sensor. Moreover, it is impractical to implement algorithms for bit extraction to all detectors of the array because of different responses and mismatches among SPADs.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Jan 1, 2016•26 citations

On-Chip Quantum Communication Devices

Alessandro Trenti, Martin Achleitner, Florian Prawits +20 more

We present here results of the Quantum Technology Flagship project UNIQORN in the area of integrated photonics for quantum communication applications. Three distinct integration platforms, namely indium phosphide based monolithic integration, polymer-based hybrid integration and the CMOS-compatible silicon platform, have been employed to manufacture components and sub-systems on chip for quantum communication devices. The choice of different platforms was made to exploit the best characteristics of each platform for the intended quantum communication device. The indium phosphide platform was employed to manufacture a transmitter chip for quantum key distribution featuring laser, modulators, and attenuators. The transmitter chip was evaluated in a QKD experiment achieving a secure rate of 1 kbit/s. The polymer platform was investigated for engineering non-classical light sources. Entangled and heralded single-photon sources, based on non-linear optics, were assembled on the polymer in a hybrid fashion together with waveguides and other passive micro-optical elements. A quantum random number generator, featuring a 70% randomness extraction efficiency, was also fabricated using the polymer integration technique. An array of 32 individual single-photon avalanche diodes, operating at room temperature and featuring an onboard coincidence logic, was coupled to the chip to demonstrate direct detection of photons on the polymer. Finally, a transimpedance amplifier based on gallium arsenide high electron mobility transistors was produced with an exceptional large electrical noise clearance of 28 dB at 100 MHz.

Journal of Lightwave Technology•Aug 24, 2022•30 citations
Quantum communication is a fast-growing field that takes advantage of the quantum physics laws to protect and secure sensitive data. This work takes part of the European project UNIQORN (Affordable Quantum Communication for Everyone: Revolutionizing the Ecosystem from Fabrication to Application) whose aim is to develop a Quantum System on Chip (QSoC) for telecom application. The Integrated Circuit (IC) designed contributes in the QRNG block of the system, tailored to communicate with the integrated non-linear optics circuit. Such detector is a 32×1 linear array based on Single-Photon Avalanche-Diode (SPAD) detectors for the generation of a raw random number, by revealing the position on the array of the single photon impinging on it, realized in a BCD 0.16 μm technology. The linear array architecture consists of 32 pixels, pitched at 125 μm, each made by 4 SPADs with different diameter (5 μm, 10 μm, 20 μm, 50 μm). Two operation modes are implemented: Single-Hit Mode, needed to reveal the (5-bit) position of the pixel triggered by a single photon, representing a random number, in a time window synchronous with the laser emission. Multi Hit Mode, used to identify a coincidence of a certain number of photons(more than one, two, three or four) detected within a specified time window, thanks to a multi threshold coincidence detection logic.
A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.
The ability to generate and handle quantum correlations in twin-beam states is the foundation to overcome the imaging limitations imposed by classical light [1], relying on efficient detectors able to select temporal correlations among photons with maximized signal-to-noise ratio. Indeed, quantum information is contained in the interaction with the sample of just two photons, thus losing even one of them or mixing them up with background can completely compromise the experiment. To this end, assessing and evaluating the expected probability of measurement errors is of utmost importance to optimize the detector design. A typical experimental setup of a quantum imaging system based on Spontaneous Parametric Down Conversion (SPDC), the most effective way of producing temporally and spatially correlated entangled photons [2], involves a pump laser hitting a non-linear birefringent crystal producing a down-converted signal, some passive optical components to generate polarization-entangled photons and a pixelated photon detector that eventually reveals the position of coincident entangled photons. The overall detection efficiency of the measurement setup (i.e. heralding efficiency ηH) gathers all its possible losses and non-idealities of the mentioned setup components, namely the crystal conversion efficiency, the optical losses, the detector Photon Detection Efficiency (PDE) and fill-factor. In this study, we consider a detection based on a Single Photon Avalanche Diode (SPAD) array, able to detect coincidences on-chip and with event-driven architecture, which provides fast readout, low power consumption and optimized data throughput. However, related to every on-chip coincidence detection and event-driven based architecture, some operations require a certain amount of time to be performed that, combined with the generation of undesired single photons (both due to limited heralding efficiency and SPAD Dark Count Rate, DCR), yield to three measurement errors, here described with their related probabilities. Firstly, due to the finite duration of the coincidence window ∆tCOINC, there exist a probability Pfalseof wrongly detecting as coincident photons two single photons, and can be expressed as:\begin{equation*}{P_{false}} = \frac{{\left[ {2{\mu _{SOURCE{\text{ }}}}{\eta _H}\left( {1 - {\eta _H}} \right) + {\text{DCR}}} \right]\left( {1 - {e^{ - \left[ {2{\mu _{SOURCE}}{\eta _H}\left( {1 - {\eta _H}} \right) + {\text{DCR}}} \right]\Delta {t_{COINC}}}}} \right)}}{{{\mu _{SOURCE}}\eta _H^2 + \left[ {2{\mu _{SOURCE}}{\eta _H}\left( {1 - {\eta _H}} \right) + DCR} \right]\left( {1 - {e^{ - \left[ {2{\mu _{SOURCE}}{\eta _H}\left( {1 - {\eta _H}} \right) + {\text{DCR}}} \right]\Delta {t_{COINC}}}}} \right)}}\tag{1}\end{equation*}where µSOURCEis the number of photon pairs generated by an ideal non-linear crystal. Secondly, in the time needed for the array to "freeze" the pixels state after a coincidence event (∆tFREEZE) so that they can be readout, there is the probability Pspuriousof detecting a third spurious event after a coincidence has been detected, which is expressed as:\begin{equation*}{P_{spurious}} = 1 - {e^{ - \left[ {2{\mu _{SOURCE\eta }}_H\left( {1 - {\eta _H}} \right) + DCR} \right]\Delta {t_{FREEZE}}}}\tag{2}\end{equation*}
Single-Photon Avalanche Diodes (SPADs) are solid-state photo-detectors capable of detecting single photons by exploiting the avalanche effect that occurs in the breakdown of a p-n junction biased above breakdown voltage. By this effect, a SPAD translates an incoming photon to a macroscopic current pulse. These devices are currently used for building medical devices characterized by a very high time resolution. An appealing application of SPAD is to use them as a basic block for building the entropy source of true random number generators. In this paper we focus on such application, and we explore the design challenges behind the realization of a quantum random number generator based on a massively parallel array of SPADs. The matrix under investigation comprises 512×128 independent cells that convert photons onto a raw bit-stream, which, as ensured by the properties of quantum physics, is characterized by a very high level of randomness. The sequences are read out in a 128-bit parallel bus, concatenated, and pipelined onto a de-biasing filter. Subsequently, we fabricated the proposed chip using a standard CMOS process. Our results, achieved on the manufactured device and coupling two matrices, show that our architecture can reach up to 5 Gbit/s while consuming 25pJ/bit, thus demonstrating scalability and performance for any random number generators based on SPADs.
A robust true random number generator (TRNG), able to assure high quality output at different working conditions, is an attractive solution in secure communication application, because it increases resilience against possible external attacks. Among different TRNGs, quantum RNGs (QRNG) represent a good candidate for such systems, because of their compactness, low cost and performance [1–6]. They typically consist of a source of photons, such as an attenuated LED, coupled to a detector with single photon capability (SPAD). Many works in the literature have used a single detector [1–4] for random bit extraction. These devices are characterized by a limited bit rate [1], which can be increased by exploiting the arrival time of photons at the cost of circuit and system complexity [2–4]. Recent works [5–6] proposed to implement an array of detectors based on SPAD working in parallel thus extending the speed of QRNG up to 5 Gb/s [5]. Despite the high bit rate, the main drawback of [5] is the strong dependence of each pixel bias on the impinging light intensity which forces the system to work only for a narrow range of photon flux that poses several constraints on the design of the final QRNG system, e.g. the need of a feedback control loop to maintain a constant flux of photons, and of a uniform distribution of light over the entire sensor. Moreover, it is impractical to implement algorithms for bit extraction to all detectors of the array because of different responses and mismatches among SPADs.
We present here results of the Quantum Technology Flagship project UNIQORN in the area of integrated photonics for quantum communication applications. Three distinct integration platforms, namely indium phosphide based monolithic integration, polymer-based hybrid integration and the CMOS-compatible silicon platform, have been employed to manufacture components and sub-systems on chip for quantum communication devices. The choice of different platforms was made to exploit the best characteristics of each platform for the intended quantum communication device. The indium phosphide platform was employed to manufacture a transmitter chip for quantum key distribution featuring laser, modulators, and attenuators. The transmitter chip was evaluated in a QKD experiment achieving a secure rate of 1 kbit/s. The polymer platform was investigated for engineering non-classical light sources. Entangled and heralded single-photon sources, based on non-linear optics, were assembled on the polymer in a hybrid fashion together with waveguides and other passive micro-optical elements. A quantum random number generator, featuring a 70% randomness extraction efficiency, was also fabricated using the polymer integration technique. An array of 32 individual single-photon avalanche diodes, operating at room temperature and featuring an onboard coincidence logic, was coupled to the chip to demonstrate direct detection of photons on the polymer. Finally, a transimpedance amplifier based on gallium arsenide high electron mobility transistors was produced with an exceptional large electrical noise clearance of 28 dB at 100 MHz.