Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Sciences

Quantum Modular Adder over GF(2n − 1) without Saving the Final Carry

Aeyoung Kim, Seong-Min Cho, Chang-Bae Seo, Sokjoon Lee, Seung-Hyun Seo

Published Mar 25, 2021• 8 citations
Publisher

Abstract

Addition is the most basic operation of computing based on a bit system. There are various addition algorithms considering multiple number systems and hardware, and studies for a more efficient addition are still ongoing. Quantum computing based on qubits as the information unit asks for the design of a new addition because it is, physically, wholly different from the existing frequency-based computing in which the minimum information unit is a bit. In this paper, we propose an efficient quantum circuit of modular addition, which reduces the number of gates and the depth. The proposed modular addition is for the Galois Field GF(2n−1), which is important as a finite field basis in various domains, such as cryptography. Its design principle was from the ripple carry addition (RCA) algorithm, which is the most widely used in existing computers. However, unlike conventional RCA, the storage of the final carry is not needed due to modifying existing diminished-1 modulo 2n−1 adders. Our proposed adder can produce modulo sum within the range 0,2n−2 by fewer qubits and less depth. For comparison, we analyzed the proposed quantum addition circuit over GF(2n−1) and the previous quantum modular addition circuit for the performance of the number of qubits, the number of gates, and the depth, and simulated it with IBM’s simulator ProjectQ.

DOI
10.3390/app11072949

Related papers

A logarithmic-depth quantum carry-lookahead adder

Thomas G. Draper, Samuel Kutin, Eric M. Rains +1 more

We present an efficient addition circuit, borrowing techniques from classical carry-lookahead arithmetic. Our quantum carry-lookahead (\QCLA) adder accepts two n-bit numbers and adds them in O(\log n) depth using O(n) ancillary qubits. We present both in-place and out-of-place versions, as well as versions that add modulo 2^n and modulo 2^n - 1. Previously, the linear-depth ripple-carry addition circuit has been the method of choice. Our work reduces the cost of addition dramatically with only a slight increase in the number of required qubits. The \QCLA\ adder can be used within current modular multiplication circuits to reduce substantially the run-time of Shor's algorithm.

arXiv:quant-ph/0406142•Quantum Information and Computation•Jul 1, 2006•232 citations

Novel Optimized Designs of Modulo 2 n +1 Adder for Quantum Computing

Bhaskar Gaur, Himanshu Thapliyal

Quantum modular adders are one of the most fundamental yet versatile quantum computation operations. They help implement the functions of higher complexity, such as subtraction and multiplication, which are used in applications, such as quantum cryptanalysis, quantum image processing, and securing communication. To the best of our knowledge, there is no existing design of quantum modulo ($2^{n}+1$) adder (QMA). In this work, we propose four quantum adders targeted specifically for modulo ($2^{n}+1$) addition. These adders can provide both regular and modulo ($2^{n}+1$) sum concurrently, enhancing their application in residue number system-based arithmetic. Our first design, QMA1, is a novel quantum modulo ($2^{n}+1$) adder. The second proposed adder, QMA2, optimizes the utilization of quantum gates within the QMA1, resulting in 37.5% reduced CNOT gate count, 46.15% reduced CNOT depth, and 26.5% decrease in both Toffoli gates and depth. We propose a third adder QMA3 that uses zero resets, a dynamic circuits-based feature that reuses qubits, leading to 25% savings in qubit count. Our fourth design, QMA4, demonstrates the benefit of incorporating additional zero resets to achieve a purer$|0$$\rangle $state, reducing quantum state preparation errors. Notably, we conducted experiments using 5-qubit configurations of the proposed modulo ($2^{n}+1$) adders on the IBM Washington, a 127-qubit quantum computer based on the Eagle R1 architecture, to demonstrate a 28.8% reduction in QMA1’s error of which do the following: 1) 18.63% error reduction happens due to gate/depth reduction in QMA2; 2) 2.53% drop in error due to qubit reduction in QMA3; and 3) 7.64% error decreased due to application of additional zero resets in QMA4.

arXiv:2406.07486•IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Jul 15, 2024•5 citations

A logarithmic-depth quantum carry-lookahead adder

Thomas G. Draper, Samuel Kutin, Eric M. Rains +1 more

We present an efficient addition circuit, borrowing techniques from the classical carry-lookahead arithmetic circuit. Our quantum carry-lookahead (QCLA) adder accepts two n-bit numbers and adds them in O(log n) depth using O(n) ancillary qubits. We present both in-place and out-of-place versions, as well as versions that add modulo 2^n and modulo 2^n - 1. Previously, the linear-depth ripple-carry addition circuit has been the method of choice. Our work reduces the cost of addition dramatically with only a slight increase in the number of required qubits. The QCLA adder can be used within current modular multiplication circuits to reduce substantially the run-time of Shor's algorithm.

Quantum Information and Computation•Jul 1, 2006•157 citations

A Logarithmic Depth Quantum Carry-Lookahead Modulo (2n - 1) Adder

Bhaskar Gaur, Edgard Muñoz‐Coreas, Himanshu Thapliyal

Quantum Computing is making significant advancements toward creating machines capable of implementing quantum algorithms in various fields, such as quantum cryptography, quantum image processing, and optimization. The development of quantum arithmetic circuits for modulo addition is vital for implementing these quantum algorithms. While it is ideal to use quantum circuits based on fault-tolerant gates to overcome noise and decoherence errors, the current Noisy Intermediate Scale Quantum (NISQ) era quantum computers cannot handle the additional computational cost associated with fault-tolerant designs. Our research aims to minimize circuit depth, which can reduce noise and facilitate the implementation of quantum modulo addition circuits on NISQ machines. This work presents quantum carry-lookahead modulo (2n - 1) adder (QCLMA), which is designed to receive two n-bit numbers and perform their addition with an O(log n) depth. Compared to existing work of O(n) depth, our proposed QCLMA reduces the depth and helps increase the noise fidelity. In order to increase error resilience, we also focus on creating a tree structure based Carry path, unlike the chain based Carry path of the current work. We run experiments on Quantum Computer IBM Cairo to evaluate the performance of the proposed QCLMA against the existing work and define Quantum State Fidelity Ratio (QSFR) to quantify the closeness of the correct output to the top output. When compared against existing work, the proposed QCLMA achieves a 47.21% increase in QSFR for 4-qubit modulo addition showcasing its superior noise fidelity.

arXiv:2408.01002•ACM Great Lakes Symposium on VLSI (GLSVLSI)•May 31, 2023•6 citations

Quantum Modular Multiplication: A New Frontier in Quantum Computing

Mahankali Mani Teja, J. V. R. Ravindra, Sunku Rohan Sanjay Reddy +1 more

Quantum modular multipliers are a promising development in the field of quantum computing that aim to perform modular multiplication faster and more efficiently than classical algorithms. This is achieved by encoding the numbers being multiplied into quantum bits (qubits) and using quantum gates to manipulate them in a way that represents the calculation. Since quantum physics principles like superposition and entanglement dramatically speed up processing compared to conventional computing, many calculations may be run simultaneously. Quantum modular multipliers have the potential to have a significant impact in a range of fields, including cryptography and beyond, since they offer a faster and more efficient way to do modular multiplications. Several fields, including simulation, optimization, and cryptography, can benefit from the use of quantum computing.One of the crucial operations in many of these applications is modular multiplication, a sort of multiplication that requires obtaining the remainder of the product of two numbers when divided by a third number. In this paper, we provide a novel modular multiplication method based on a quantum algorithm. To examine its complexity and compare it to that of current adders, we employ a novel form of adder that is intended to not retain the final carry. This adder's decrease percentage in terms of gates and depth is roughly 70%. Our method takes advantage of the special qualities of qubits to complete the computation significantly more quickly than conventional algorithms. It is based on the fundamental ideas of quantum physics, such as superposition and entanglement.

IEEE International Conference for Convergence in Technology (I2CT)•Apr 7, 2023•0 citations

Design of Quantum Circuits for Galois Field Squaring and Exponentiation

Edgard Muñoz‐Coreas, Himanshu Thapliyal

This work presents an algorithm to generate depth, quantum gate and qubit optimized circuits for GF(2m) squaring in the polynomial basis. Further, to the best of our knowledge the proposed quantum squaring circuit algorithm is the only work that considers depth as a metric to be optimized. We compared circuits generated by our proposed algorithm against the state of the art and determine that they require 50% fewer qubits and offer gates savings that range from 37% to 68%. Further, existing quantum exponentiation are based on either modular or integer arithmetic. However, Galois arithmetic is a useful tool to design resource efficient quantum exponentiation circuit applicable in quantum cryptanalysis. Therefore, we present the quantum circuit implementation of Galois field exponentiation based on the proposed quantum Galois field squaring circuit. We calculated a qubit savings ranging between 44% to 50% and quantum gate savings ranging between 37% to 68% compared to identical quantum exponentiation circuit based on existing squaring circuits.

arXiv:1706.05114•IEEE Computer Society Annual Symposium on VLSI•Jul 1, 2017•7 citations
Addition is the most basic operation of computing based on a bit system. There are various addition algorithms considering multiple number systems and hardware, and studies for a more efficient addition are still ongoing. Quantum computing based on qubits as the information unit asks for the design of a new addition because it is, physically, wholly different from the existing frequency-based computing in which the minimum information unit is a bit. In this paper, we propose an efficient quantum circuit of modular addition, which reduces the number of gates and the depth. The proposed modular addition is for the Galois Field GF(2n−1), which is important as a finite field basis in various domains, such as cryptography. Its design principle was from the ripple carry addition (RCA) algorithm, which is the most widely used in existing computers. However, unlike conventional RCA, the storage of the final carry is not needed due to modifying existing diminished-1 modulo 2n−1 adders. Our proposed adder can produce modulo sum within the range 0,2n−2 by fewer qubits and less depth. For comparison, we analyzed the proposed quantum addition circuit over GF(2n−1) and the previous quantum modular addition circuit for the performance of the number of qubits, the number of gates, and the depth, and simulated it with IBM’s simulator ProjectQ.
We present an efficient addition circuit, borrowing techniques from classical carry-lookahead arithmetic. Our quantum carry-lookahead (\QCLA) adder accepts two n-bit numbers and adds them in O(\log n) depth using O(n) ancillary qubits. We present both in-place and out-of-place versions, as well as versions that add modulo 2^n and modulo 2^n - 1. Previously, the linear-depth ripple-carry addition circuit has been the method of choice. Our work reduces the cost of addition dramatically with only a slight increase in the number of required qubits. The \QCLA\ adder can be used within current modular multiplication circuits to reduce substantially the run-time of Shor's algorithm.
Quantum modular adders are one of the most fundamental yet versatile quantum computation operations. They help implement the functions of higher complexity, such as subtraction and multiplication, which are used in applications, such as quantum cryptanalysis, quantum image processing, and securing communication. To the best of our knowledge, there is no existing design of quantum modulo (2n+12^{n}+12n+1) adder (QMA). In this work, we propose four quantum adders targeted specifically for modulo (2n+12^{n}+12n+1) addition. These adders can provide both regular and modulo (2n+12^{n}+12n+1) sum concurrently, enhancing their application in residue number system-based arithmetic. Our first design, QMA1, is a novel quantum modulo (2n+12^{n}+12n+1) adder. The second proposed adder, QMA2, optimizes the utilization of quantum gates within the QMA1, resulting in 37.5% reduced CNOT gate count, 46.15% reduced CNOT depth, and 26.5% decrease in both Toffoli gates and depth. We propose a third adder QMA3 that uses zero resets, a dynamic circuits-based feature that reuses qubits, leading to 25% savings in qubit count. Our fourth design, QMA4, demonstrates the benefit of incorporating additional zero resets to achieve a purer∣0|0∣0$\rangle $state, reducing quantum state preparation errors. Notably, we conducted experiments using 5-qubit configurations of the proposed modulo (2n+12^{n}+12n+1) adders on the IBM Washington, a 127-qubit quantum computer based on the Eagle R1 architecture, to demonstrate a 28.8% reduction in QMA1’s error of which do the following: 1) 18.63% error reduction happens due to gate/depth reduction in QMA2; 2) 2.53% drop in error due to qubit reduction in QMA3; and 3) 7.64% error decreased due to application of additional zero resets in QMA4.
We present an efficient addition circuit, borrowing techniques from the classical carry-lookahead arithmetic circuit. Our quantum carry-lookahead (QCLA) adder accepts two n-bit numbers and adds them in O(log n) depth using O(n) ancillary qubits. We present both in-place and out-of-place versions, as well as versions that add modulo 2^n and modulo 2^n - 1. Previously, the linear-depth ripple-carry addition circuit has been the method of choice. Our work reduces the cost of addition dramatically with only a slight increase in the number of required qubits. The QCLA adder can be used within current modular multiplication circuits to reduce substantially the run-time of Shor's algorithm.
Quantum Computing is making significant advancements toward creating machines capable of implementing quantum algorithms in various fields, such as quantum cryptography, quantum image processing, and optimization. The development of quantum arithmetic circuits for modulo addition is vital for implementing these quantum algorithms. While it is ideal to use quantum circuits based on fault-tolerant gates to overcome noise and decoherence errors, the current Noisy Intermediate Scale Quantum (NISQ) era quantum computers cannot handle the additional computational cost associated with fault-tolerant designs. Our research aims to minimize circuit depth, which can reduce noise and facilitate the implementation of quantum modulo addition circuits on NISQ machines. This work presents quantum carry-lookahead modulo (2n - 1) adder (QCLMA), which is designed to receive two n-bit numbers and perform their addition with an O(log n) depth. Compared to existing work of O(n) depth, our proposed QCLMA reduces the depth and helps increase the noise fidelity. In order to increase error resilience, we also focus on creating a tree structure based Carry path, unlike the chain based Carry path of the current work. We run experiments on Quantum Computer IBM Cairo to evaluate the performance of the proposed QCLMA against the existing work and define Quantum State Fidelity Ratio (QSFR) to quantify the closeness of the correct output to the top output. When compared against existing work, the proposed QCLMA achieves a 47.21% increase in QSFR for 4-qubit modulo addition showcasing its superior noise fidelity.
Quantum modular multipliers are a promising development in the field of quantum computing that aim to perform modular multiplication faster and more efficiently than classical algorithms. This is achieved by encoding the numbers being multiplied into quantum bits (qubits) and using quantum gates to manipulate them in a way that represents the calculation. Since quantum physics principles like superposition and entanglement dramatically speed up processing compared to conventional computing, many calculations may be run simultaneously. Quantum modular multipliers have the potential to have a significant impact in a range of fields, including cryptography and beyond, since they offer a faster and more efficient way to do modular multiplications. Several fields, including simulation, optimization, and cryptography, can benefit from the use of quantum computing.One of the crucial operations in many of these applications is modular multiplication, a sort of multiplication that requires obtaining the remainder of the product of two numbers when divided by a third number. In this paper, we provide a novel modular multiplication method based on a quantum algorithm. To examine its complexity and compare it to that of current adders, we employ a novel form of adder that is intended to not retain the final carry. This adder's decrease percentage in terms of gates and depth is roughly 70%. Our method takes advantage of the special qualities of qubits to complete the computation significantly more quickly than conventional algorithms. It is based on the fundamental ideas of quantum physics, such as superposition and entanglement.
This work presents an algorithm to generate depth, quantum gate and qubit optimized circuits for GF(2m) squaring in the polynomial basis. Further, to the best of our knowledge the proposed quantum squaring circuit algorithm is the only work that considers depth as a metric to be optimized. We compared circuits generated by our proposed algorithm against the state of the art and determine that they require 50% fewer qubits and offer gates savings that range from 37% to 68%. Further, existing quantum exponentiation are based on either modular or integer arithmetic. However, Galois arithmetic is a useful tool to design resource efficient quantum exponentiation circuit applicable in quantum cryptanalysis. Therefore, we present the quantum circuit implementation of Galois field exponentiation based on the proposed quantum Galois field squaring circuit. We calculated a qubit savings ranging between 44% to 50% and quantum gate savings ranging between 37% to 68% compared to identical quantum exponentiation circuit based on existing squaring circuits.